Search

The Taguchi optimization method is an efficient method for motor design optimization. However, it is hard to handle the multiobjective motor optimization problem with big design space for the parameters. To deal with this problem, in this article, a fuzzy method and sequential Taguchi method to optimize an inter permanent magnet synchronous motor (IPMSM) is employed. The fuzzy inference system is introduced to convert the multiple objectives to a single-objective optimization problem. The sequential Taguchi method is used to optimize the structural parameters at multiple levels to improve the accuracy of optimization. After the optimal selection analysis, the best combination of motor structure factors is obtained. By comparing the optimization result of the proposed method with that of the conventional Taguchi optimization method, the effectiveness and superiority of the proposed method are verified. [ABSTRACT FROM AUTHOR]

The belt-driven starter/generator (BSG), as a cost-effective solution, has been widely employed in hybrid electric vehicles (HEVs) to improve the stability and reduce the fuel consumption of the vehicles. It can provide more than 10% reduction in CO2. Electrical machine is the heart of the BSG system, which is functioned both as motor and generator. In order to optimize both aspects of motor and generator simultaneously, this paper presents a new multimode optimization method for the switched reluctance machines. First, the general multimode concept and optimization method are presented. The switched reluctance motor and the switched reluctance generator are the two operation modes. The optimization models are established based on motor and generator functions. Sensitivity analysis, surrogate models and genetic algorithms are employed to improve the efficiency of the multimode optimization. Then, a design example of a segmented-rotor switched reluctance machine (SSRM) is investigated. Seven design variables and four driving modes are considered in the multiobjective optimization model. The Kriging model is employed to approximate the finite element model (FEM) in the optimization. Finally, the optimization results are depicted, and an optimal solution is selected. The comparison between the initial and optimal designs shows that the proposed method can improve the foremost performance of the SSRM under all driving modes. [ABSTRACT FROM AUTHOR]

The multiobjective optimization design of interior permanent magnet synchronous motors (IPMSMs) is a challenge due to the high dimension and huge computation cost of finite element analysis. This article presents a new multilevel optimization strategy for efficient multiobjective optimization of an IPMSM. To determine the multilevel optimization strategy, Pearson correlation coefficient analysis and cross-factor variance analysis techniques are employed to evaluate the correlations of design parameters and optimization objectives. A three-level optimization structure is obtained for the investigated IPMSM based on the analysis results, and different optimization parameters and objectives are assigned to different levels. To improve the optimization efficiency, the Kriging model is employed to approximate the finite element analysis for the multiobjective optimization in each level. It is found that the proposed method can provide optimal design schemes with a better performance, such as smaller torque ripple and lower power loss for the investigated IPMSM, while the needed computation cost is reduced significantly. Finally, experimental results based on a prototype are provided to validate the effectiveness of the proposed optimization method. The proposed method can be applied for the efficient multiobjective optimization of other electrical machines with high dimensions. [ABSTRACT FROM AUTHOR]

This study proposes an outer‐rotor permanent magnet synchronous hub motor (PMSHM) with similar pole and slot numbers for an electric vehicle (EV). First, the design rule of the motor size is introduced. Second, the appropriate numbers of motor poles and slots are selected to improve the torque density and save the radial space of the motor. Meanwhile, the selected poles and slots numbers can ensure that the high‐efficiency area of the motor meets the requirements of the test EV. Moreover, different winding arrangements are studied to select the appropriate winding arrangement method for the motor. Then, the key dimensions of the stator are optimised to improve the torque output and reduce the core loss of the motor by using the finite element analysis. The results indicate that the proposed outer‐rotor PMSHM with similar pole and slot numbers and double‐layer short distance concentrated slot winding exhibits high‐efficiency and high‐torque output. Finally, the predicted performance of the proposed PMSHM is verified by experiments on a prototype. Furthermore, the vehicle test is also carried out, and the results show that the prototype maintains high efficiency in the main working area of the EV. [ABSTRACT FROM AUTHOR]

In this paper, the inductance characteristics of a 2-pole surface-mounted bearingless permanent magnet synchronous motor (BPMSM) with 4-pole suspension force windings are investigated based on theoretical analysis and experimental investigation. Firstly, the winding configuration and operation principle of the BPMSM are presented. Secondly, the static and incremental inductances are defined. Then, based on the finite element (FE) analysis method, the static inductances of torque windings and suspension force windings in stator static coordinate reference are researched. In addition, the d- and q-axes static inductances in rotor revolving coordinate reference are obtained by 3/2 Transformation. Furthermore, taking the torque windings as an example, the incremental inductance of torque windings is studied, and the validity of the theory is confirmed by comparing the static and incremental inductances. Finally, the experimental study is carried out to verify the discussed numerical analysis. The results are helpful to measure parameters and build the mathematic model of BPMSMs, and lay a foundation for the further research on BPMSMs. [ABSTRACT FROM AUTHOR]