Search

This article evaluates the mechanical properties of vacuum-infused unidirectional plant fiber composites (PFRPs), composing of bast fiber yarns and thermoset matrices. PFRPs are found to have lower fiber volume fractions than E-glass composites (GFRPs). Apart from the expected (30–40%) lower density of PFRPs, they have 60–80% lower tensile strength, 30–60% lower tensile stiffness, 5–10 times lower impact strength, and 20–30% lower interlaminar shear strength than GFRPs. Importantly, critical fiber lengths are of the same order (0.2–0.5 mm). Composites reinforced with flax rovings exhibit exceptional fiber tensile modulus of 65–75 GPa and fiber tensile strength of about 800 MPa. [ABSTRACT FROM PUBLISHER]

Abstract: The effect of fibre volume fraction on the physical and tensile properties of aligned plant fibre composites (PFCs) produced via vacuum infusion has been investigated. There is no clear correlation between fibre volume fraction and porosity. However, low fibre content PFCs are prone to intra-yarn voids, while high fibre content PFCs are prone to inter-yarn voids. This is due to changing resin flow dynamics with increasing fibre content. The tensile behaviour of PFCs with increasing fibre content is similar to that of conventional fibre reinforced plastics (FRPs). Interestingly, the non-linear stress–strain response of plant fibres has been transferred to the composites. Fibre content and tensile properties are found to be linearly related, as per the rule of mixtures. A void content of up to 4% is found to have minimal effect on the tensile properties of PFCs. The minimum and critical (vf , crit ) fibre volume fractions for aligned flax and jute–polyester composites are found to be substantially higher than conventional aligned FRPs; vf , crit for jute–polyester and carbon–polyester is 8.1% and 2.4%, respectively. A simple model has also been developed to approximate the theoretical maximum obtainable fibre volume fraction of PFCs reinforced with staple fibre yarns. The absolute theoretical maximum fibre content is found to be 58.9%, which agrees with experimental values in literature. A high vf , crit (∼10%) and low vf , max (∼45%) implies that the range of useful fibre volume fractions for PFCs containing staple fibre twisted yarns is only 35%. [Copyright &y& Elsevier]