Search

A highly sensitivity balloon-like fiber interferometer based on ethanol coating is presented in this paper. The Mach–Zehnder interferometer is formed by bending a single-mode fiber to a balloon-like structure and nested in the Teflon tube. Then, an ethanol solution was filled into the tube of the balloon-like fiber interferometer by the capillary effect. Due to the high sensitivity of the refractive index (RI) of ethanol solutions to temperature, when the external temperature varies, the optical path difference changes. The change in temperature can be detected by the shift in the interference spectrum. Limited by the size of the balloon-like structure, three kinds of these structures with different sensitive lengths were prepared to select the best parameters. The sensitive lengths were 10, 15 and 20 mm, respectively, and the RI detection performance of each structure in 10~26% NaCl solutions was investigated experimentally. The results show that when the sensitive length is 20 mm, the RI sensitivity of the sensor is the highest, which is 212.88 nm/RIU. Ultimately, the sensitive length filled with ethanol is 20 mm. The experimental results show that the temperature sensitivity of the structure is 1.145 nm/°C in the range of 28.1 °C~35 °C, which is 10.3 times higher than that of an unfilled balloon-like structure (0.111 nm/°C). The system has the advantages of low cost and easy fabrication, which can potentially be used in high-precision temperature monitoring processes. [ABSTRACT FROM AUTHOR]

An all-fiber glucose sensor is proposed and demonstrated based on a helical intermediate-period fiber grating (HIPFG) produced by using a hydrogen/oxygen flame heating method. The HIPFG, with a grating length of 1.7 cm and a period of 35 μm, presents four sets of double dips with low insertion losses and strong coupling strengths in the transmission spectrum. The HIPFG possesses an averaged refractive index (RI) sensitivity of 213.6 nm/RIU nm/RIU in the RI range of 1.33–1.36 and a highest RI sensitivity of 472 nm/RIU at RI of 1.395. In addition, the HIPFG is demonstrated with a low-temperature sensitivity of 3.67 pm/°C, which promises a self-temperature compensation in glucose detection. In the glucose-sensing test, the HIPFG sensor manifests a detection sensitivity of 0.026 nm/(mg/mL) and a limit of detection (LOD) of 1 mg/mL. Moreover, the HIPFG sensor exhibits good stability in 2 h, indicating its capacity for long-time detection. The properties of easy fabrication, high flexibility, insensitivity to temperature, and good stability of the proposed HIPFG endow it with a promising potential for long-term and compact biosensors. [ABSTRACT FROM AUTHOR]

This study is intended to develop long period fibre grating sensors for potential applications in environmental and durability monitoring of coastal structures. High-quality helical long period fibre gratings (HLPFGs) are inscribed in different types of small-core single mode fibre (SMF) by use of hydrogen-oxygen flame heating technique. A detailed investigation of the effect of core diameter on their transmission spectrum and optimum length of the HLPFG has been pursued. A longer length is required to achieve the same coupling attenuation in a smaller-core SMF than that of a larger-core fibre. The strain, torsion and refractive index (RI) properties of the HLPFG is investigated experimentally to develop a high-sensitivity sensor. The experimental results show that the strain sensitivity could be enhanced by means of employing a larger-core diameter SMF. Moreover, the HLFPGs are also sensitive to the torsion and external RI. Hence, such HLFPGs have great potential for sensing applications. [ABSTRACT FROM AUTHOR]

Single-mode-no-core-single-mode (SNS) optical fiber structures have valuable potential to encapsulate as high-precision temperature sensors, due to their great sensitivity. This paper is to improve the temperature sensitivity of SNS fibers by studying the parameters of fiber length, diameter, and refractive index of the seal liquid. Transmission spectra of the fibers are given in both aspects of experiment and numerical simulation. We find that using a slim no-core fiber section sealed with liquid of high refractive index can effectively improve the sensitivity, while the choice of fiber length mainly affects the width of transmission peak. The results may contribute to the development of high-sensitivity optic temperature sensor. [ABSTRACT FROM AUTHOR]

Laser direct writing (LDW) is versatile in structuring fibers with micro‐sized functional elements such as fiber Bragg grating (FBG) and backscattering centers by finely manipulating back and side scattering from laser‐induced refractive index modified (RIM) points. However, the side‐scattering is a lesser‐explored property in laser‐structured fibers. In this work, a concise physical model is established to understand the side‐scattering as a combined effect of microstructure and geometry of RIM points. Based on a single‐pulsed LDW method, the parametric decoupling between scattering loss (α) and coupling strength (κ) coefficients of FBGs is reported, whose cross‐section is customized to have a flattened ellipse with thoroughly positive RIM, enabling controllable reflectivity from −21.33 dB to −0.0018 dB while maintaining narrow bandwidth and low loss. Exemplarily, a designed FBG realizes ultra‐low loss of 0.008 dB with a resonance attenuation of 10.81 dB, exhibiting a record‐breaking κ/α of 2083. Using this FBG as the high‐reflective mirror of a home‐made bismuth‐doped fiber laser, narrow‐band lasing with a high optical signal‐to‐noise ratio of ≈43 dB is achieved, demonstrating flexibilities of the proposed approach in customizing both back‐ and side‐scattering in fibers and opening up wide opportunities for combining multifunctional components into optical fibers and realizing all‐fiber networks. [ABSTRACT FROM AUTHOR]