For precise fertilization of blueberry plants, it is technologically the easiest and most suitable option to use a volumetric filling, for which it can be presumed that it is possible to precisely dose the fertilizer for each plant by grams. For setting up a volumetric filler, it is necessary to know parameters such as the size of the fertilizer particles and their bulk density. The aim of this research is to determine the granulometric parameters and their effect, which is done by measuring up three different fertilizers (SQM Qrop K, Memon Siforga, Substral): width, height, and length of 100 randomly selected fertilizer particles as well as the volumes and weights of 100 particles in 10 repetitions. According to the measurements, the average diameters of fertilizer particles were found as well as the average mass, volumes, and bulk density. A Mahr Digital Caliper 16EWRi 0–150 mm was used to measure the diameters of the fertilizer granules. A Yxlon FF35 computer tomograph was used to accurately scan particles. The analytical scale, Kern ABJ 220-4NM, was used to determine mass. The volumes were measured, using measuring glasses, with one having a maximum volume of 10 mL in 0.2 mL increments and another having a maximum volume of 100 mL in 1 mL increments. Descriptive statistics analysis was performed in Microsoft Excel. It turned out that the average diameters (3.68 vs. 3.64 vs. 4.29 mm) and bulk densities (0.928 vs. 0.631 vs. 0.824 g cm−3) of the three fertilizers differed far from each other, meaning that the given volume could be filled with different amounts of fertilizer. Equations between mass and weight were formed according to the measurements. As a result, it was found that a volumetric filler can be used for fertilizing blueberry plants precisely, but it demands adjusting the filler each time in the situation, which is defined by the variety of blueberry plants: their age, size, and health. [ABSTRACT FROM AUTHOR]