Search

This paper proposes a fast protection scheme of a hybrid AC/DC distribution network based on features extraction of the decomposed signals. The signal decomposition is achieved using discrete wavelets transform (DWT). The proposed scheme offers three main functions, fast fault detection for both network sides, AC fault classification with the ability to identify the faulted phase/ phases, and protection coordination between AC and DC sides. In addition, the scheme is based on local measurement so no need for extra-cost for communication infrastructure. The absence of communication reduces the overall cost and, as a most important feature, it reduces the fault clearing time. The system is thoroughly analyzed under many types of faults in both AC and DC sides. Also, different disturbance conditions are considered which used in threshold determination. The simulation results show that the proposed protection scheme was not only able to protect the system but also it offers a generalized fast acting communication-less approach. [ABSTRACT FROM AUTHOR]

The presented paper introduces an accurate approach for detecting and classifying parametric or soft faults that affect analog integrated circuits. This technique is based on the use of machine learning algorithm to improve the accuracy and the performance of fault classification process. To achieve this, the real and imaginary frequency responses of output voltage and supply current of the circuits under test (CUT) are used to extract features for both normal and faulty cases. These features are then exploited to train machine learning classifiers, from which the selected one among its equivalents is the quadratic discriminant classifier since it allowed the highest average accuracy score. The faults to be investigated are parametric ones affecting resistors and capacitors values. The proposed approach is validated using three filters circuits that are Sallen-Key band-pass filter, four op-amp biquad high-pass filter, and a leapfrog filter circuit. Obtained results indicate a high classification average accuracy for all circuits that are undergone testing. The proposed approach has provided a highest classification accuracy level comparing to other research works. [ABSTRACT FROM AUTHOR]

The smart grid is an intelligent power system network that should be reliable and resilient for sustainable operation. Wide-Area Measurement Systems (WAMS) are deployed in the power grid to provide real-time situational awareness to the power grid operators. An excellent strategy for exploiting the WAMS data effectively is to extract relevant insights from the increasing volume of data collected. Feature extraction techniques are pivotal in developing data-driven models for power systems. This paper proposes an ensemble feature extraction method for developing intelligent data-driven models for transmission line fault detection and classification. A comparative efficacy analysis of the proposed ensemble feature extraction method is carried out with state-of-the-art feature extraction methods. The models developed and evaluated with the feature data derived with the proposed method give an accuracy of 100 % for fault detection and 99.78 % for fault classification. This method also has the advantage of significantly reducing training and testing time. Features are extracted from the WAMS data collected by simulating an IEEE 39 bus test system in the Power World simulator. [ABSTRACT FROM AUTHOR]

Recently, the concept of the microgrid (MG) has been developed to assist the penetration of large numbers of distributed energy resources (DERs) into distribution networks. However, the integration of DERs in the form of MGs disturbs the operating codes of traditional distribution networks. Consequently, traditional protection strategies cannot be applied to MG against short-circuit faults. This paper presents a novel intelligent protection strategy (NIPS) for MGs based on empirical wavelet transform (EWT) and long short-term memory (LSTM) networks. In the proposed NIPS, firstly, the three-phase current signals measured by protective relays are decomposed into empirical modes (EMs). Then, various statistical features are extracted from the obtained EMs. Afterwards, the extracted features along with the three-phase current measurement are input to three different LSTM network to obtain exact fault type, phase, and location information. Finally, a trip signal based on the obtained fault information is generated to disconnect the faulty portion from the rest of the MG. The significant feature of the proposed NIPS is that it does not need adaptive relaying and communication networks. Moreover, it is independent of the operating scenario and hence fault current magnitude. To evaluate the efficacy of the proposed NIPS, exhaustive simulations are performed on an international electro-technical commission (IEC) MG. The simulation results confirm the efficiency of the proposed NIPs in terms of accuracy, dependability, and security. Moreover, comparisons with existing intelligent protection schemes validate that the proposed NIPS is highly accurate, secure, and dependable. [ABSTRACT FROM AUTHOR]

Machine learning and other data-driven methods have developed at a prolific rate for industrial applications due to the advent of industrial big data. However, industrial datasets may not be especially well-suited to supervised learning approaches that require extensive domain knowledge in the complete and accurate labeling of datasets. To address these challenges, a semi-supervised learning approach is proposed that makes use of partially labeled subsets. The proposed methodology is applied to high-dimensional in-process measurement data, utilizing a convolutional autoencoder (CAE) for unsupervised feature extraction. A multiclass extension for semi-supervised anomaly diagnosis is proposed that utilizes principal component analysis (PCA) as the basis for anomaly scoring, and the proposed approach intersects the results of targeted one-against-all phases on partially labeled sets to classify faults. Experiments in a case study on semiconductor manufacturing measurement data are performed to explore the relationship between latent features extracted and anomaly detection performance. The application of the proposed algorithm achieves a true positive detection rate of over 90% with false positive rate under 9% for both local and global anomaly types, with these results accomplished while reducing over 99% of the original input data dimensions. In addition, the approach also allows for positive samples to be identified that were previously undetected by human experts. These results are promising for the application of the proposed semi-supervised methodology in real industrial settings. [ABSTRACT FROM AUTHOR]

The photovoltaic (PV) array is the most sensible element in PV plants, which is subject to different type of faults and defects. Thus, to keep these plants working efficiently they should be monitored and protected carefully. Some faults if they are not detected and isolated promptly they may lead to hazardous risks. The diagnosis of PV systems is widely addressed and recently machine learning (ML) and deep leaning (DL) methods drawn the attention of many researchers. Most applications of ML methods are based on the use of the I–V curves measurement, as enough information and features can be extracted from the curves, to detect and classify faults. These methods showed their capability to classify some faults, like line to line, degradation, disconnected PV modules, partial shading effect, and bypass diode faults. Another approach is based on the use of thermal or electroluminescence images of PV modules/arrays to detect and identify defects, such as hot spot, snails crack, and others. In this paper, different ML and ensemble learning (EL) methods are evaluated for fault diagnosis of PV arrays. The focus is mainly on the detection and classification of some complex faults that may affect the PV arrays, i.e., multiple faults, and faults with similar I–V curves, that are not evaluated before. The results showed the ability of the methods developed to detect faults with very good accuracy (classification rate = number of classified instances/total instances), within 99%, while the classification faults is done with an acceptable accuracy, within 81.73%. Through this study it is shown when really ML and EL methods should be used, and some recommendations, challenges and future directions in this topic are presented. [ABSTRACT FROM AUTHOR]

Bearings are vital automation machine elements that are used quite frequently for power transmission and shaft bearing in rotating machines. The healthy operation of the bearings directly affects the performance of the rotating machines. Bearing faults may cause more vibration than normal in rotating machines, which wastes power. However, further bearing failures can cause vital damage to rotating machines. In this study, bearing vibration values are obtained through a special test setup. Different types and different sizes of artificial faults have been created in the bearings for the testing process. Data on these bearings are collected at different speeds. The purpose of the study is to diagnose faults in the bearings. In this context, a new approach is proposed. First, the one-dimensional local binary pattern (1D-LBP) method is applied to vibration signals, and all signal data are carried to the 1D-LBP plane. Statistical features are obtained from the signals in the 1D-LBP plane by using these features, and then the vibrational signals are classified by the gray relational analysis (GRA) model. Four different data sets are organized to test the proposed approach. The results of the test process with this proposed model have an accuracy of 99.044% for Dataset1 (different speed -300 rpm intervals), 94.224% for Dataset2 (different speed -60 rpm intervals), and 99.584% for Dataset3 (fault size (mm)); a 100% average success rate is observed for Dataset4 (fault type - error free bearing (EFB), inner ring fault (IRF), outer ring fault (ORF), and ball fault (BF)).

To improve power system reliability, a protection mechanism is highly needed. Early detection can be used to prevent failures in the power transmission line (TL). A classification system method is widely used to protect against false detection as well as assist the decision analysis. Each TL signal has a continuous pattern in which it can be detected and classified by the conventional methods, i.e., wavelet feature extraction and artificial neural network (ANN). However, the accuracy resulting from these mentioned models is relatively low. To overcome this issue, we propose a machine learning-based on Convolutional Neural Network (CNN) for the transmission line faults (TLFs) application. CNN is more suitable for pattern recognition compared to conventional ANN and ANN with Discrete Wavelet Transform (DWT) feature extraction. In this work, we first simulate our proposed model by using Simulink® and Matlab®. This simulation generates a fault signal dataset, which is divided into 45.738 data training and 4.752 data tests. Later, we design the number of machine learning classifiers. Each model classifier is trained by exposing it to the same dataset. The CNN design, with raw input, is determined as an optimal output model from the training process with 100% accuracy. [ABSTRACT FROM AUTHOR]

Detection and classification of any anomaly at its commencement are very crucial for optimal management of assets in power system grids. This paper presents a novel hybrid approach that combines S-transform (ST) and feedforward neural network (FFNN) for the detection and classification of distribution grid faults. In this proposed strategy, the measured three-phase current signals are processed through ST with a view to extracting useful statistical features. The extracted features are then fetched to FFNN in order to detect and classify different types of faults. The proposed approach is implemented in two different test distribution grids modeled and simulated in real-time digital simulator and MATLAB/SIMULINK. The obtained results justify the efficacy of the presented technique for both noise-free and noisy data. In addition, the developed technique is independent of fault resistance, inception angle, distance, and prefault loading condition. Besides, the comparative results confirm the superiority and competitiveness of the developed technique over the available techniques reported in the literature.

In this paper, machine learning technique is used to detect and classify all shunt faults in a UPFC compensated transmission line. A four-bus three-machine system with detailed modelling of UPFC has been used for fault simulation studies in MATLAB/Simulink. Instantaneous voltage and current signals obtained at local bus terminal are processed with DFT and statistical method for feature extraction. The input features of the ANN are minimised by using the statistical method. Generated features are used for training the ANN module. Trained ANN modules are used for testing different fault conditions in the time domain. Rigorous simulation studies have been performed with a wide variety of different possible fault situations. Simulation results bring out the superiority of the scheme. Moreover, the error introduced due to CT, CCVT and Dynamic behaviour of the UPFC has been considered for testing the trained ANNs by varying the different operating mode of UPFC, and different compensation levels, wherein all the cases, the performance is found reliable. [ABSTRACT FROM AUTHOR]

Bearings are fundamental mechanical components in rotary machines (engines, gearboxes, generators, radars, turbines, etc.) that have been identified as one of the primary causes of failure in these machines. This makes bearing fault diagnosis (detection, classification, and prognosis) an economic very relevant topic, as well as a technically challenging one as evaluated by the extensive research literature on the subject. This paper employs a systematic methodology to identify, summarize, analyze, and interpret the primary literature on fuzzy formalisms for bearing fault diagnosis from 2000 to 2017 (March). The main contribution is an updated, unbiased, and (to a higher extend) repeatable search, review, and analysis (summary, classification, and critique) of the available approaches resorting to fuzzy formalisms in this trendy topic. A discussion on a new promising future research direction is provided. A comprehensive list of references is also included. [ABSTRACT FROM AUTHOR]

Fault Detection and Isolation (FDI) in Heating, Ventilation, and Air Conditioning (HVAC) systems is an important approach to guarantee the human safety of these systems. Therefore, the implementation of a FDI framework is required to reduce the energy needs for buildings and improving indoor environment quality. The main goal of this paper is to merge the benefits of multiscale representation, Principal Component Analysis (PCA), and Machine Learning (ML) classifiers to improve the efficiency of the detection and isolation of Air Conditioning (AC) systems. First, the multivariate statistical features extraction and selection is achieved using the PCA method. Then, the multiscale representation is applied to separate feature from noise and approximately decorrelate autocorrelation between available measurements. Third, the extracted and selected features are introduced to several machine learning classifiers for fault classification purposes. The effectiveness and higher classification accuracy of the developed Multiscale PCA (MSPCA)-based ML technique is demonstrated using two examples: synthetic data and simulated data extracted from Air Conditioning systems.

We present in this paper a novel method for fault detection and classification in power transmission lines based on convolutional sparse autoencoder. Contrary to conventional methods, the proposed method automatically learns features from a dataset of voltage and current signals, on the basis of which a framework for fault detection and classification is created. Convolutional feature mapping and mean pooling are implemented in order to generate feature vectors with local translation-invariance for half-cycle multi-channel signal segments. Fault detection and classification are achieved by a softmax classifier using the feature vectors. Further, the proposed method is tested under different sampling frequencies and signal types. The generalizability of the proposed method is also verified by adding noise and measurement errors to the data. Results show that the proposed method is fast and accurate in detecting and classifying faults, and is practical for online transmission line protection for its high robustness and generalizability. [ABSTRACT FROM PUBLISHER]

In this study, a novel algorithm for detecting and classifying faults in transmission lines is proposed. The algorithm is based on mathematical morphology and initial current travelling waves. A new morphological edge detection (MED) filter to extract the transient features from the original fault signal is designed. This MED filter can fast and accurately detect the arrival time and polarity of travelling waves in all conditions. The appropriate criteria of fault classification and faulted‐phase selection are introduced based on polarity of initial current travelling waves. The simulations based on the electromagnetic transients program and MATLAB have been done to evaluate the validity of the proposed algorithm. [ABSTRACT FROM AUTHOR]

This paper presents a non-unit protection scheme for series capacitor compensated transmission lines (SCCTL) using discrete wavelet transform and k-nearest neighbor (k-NN) algorithm. All the protective relaying functions such as fault detection, fault classification, faulty phase identification and fault location estimation have been considered in this work. Such a comprehensive work providing all protective relaying functions for protection of double circuit SCCTL utilizing k-NN has not been reported so far. The signal processing and feature extraction are done using discrete wavelet transform due to its capability to differentiate between high and low frequency transient components. For fault detection and classification, only approximate wavelet coefficient of current signal up to level 1 has been used; while for k-NN location estimation, both voltage and current signals of the two circuits are decomposed up to level 3 have been used. Finally, the standard deviation of one cycle pre-fault and one cycle post-fault samples of the approximate wavelet coefficients are calculated to form the feature vector for the k-NN-based algorithm. The performance of the proposed technique is evaluated for large number of fault events with variation in fault type including inter-circuit faults, fault inception angle, fault location and fault resistance. The change in position of series capacitor and different degree of compensation has been discussed. The accuracy of the proposed k-NN-based fault detection and classification module is 100% for all the tested fault cases with a decision period of less than half cycle. The k-NN-based fault location scheme estimates the location of fault with ≤1% error for most of the tested fault cases, which is an exceptional attribute of the proposed scheme as compared with 10–15% error of conventional distance relaying scheme. [ABSTRACT FROM AUTHOR]

Diagnosis aims at predicting the health status of components and systems. In photovoltaic systems, it is vital to guarantee energy production and extend the useful life of photovoltaic power plants. Multiple prediction and classification algorithms have been proposed for this purpose in the literature. The accuracy of these algorithms depends directly on the quality of the data and the features with which they are tuned or trained. In this paper, an innovative approach for predicting the health status of photovoltaic systems is proposed, which includes a feature selection stage. This approach first discriminates severely affected photovoltaic panels using basic electrical features. In a second step, it discriminates the other faulty panels using more elaborated time–frequency features and selecting the most relevant features through correlation and variance analysis. Finally, the approach predicts the health status of photovoltaic panels using a nonlinear regression method named partial least squares. This later is then combined with linear discriminant analysis and compared. The approach is validated with real current data from a photovoltaic plant composed of twelve photovoltaic panels with power between 205 and 240 Wp in three health states, namely broken glass, healthy, and big snail trails. The results obtained show that the proposed approach efficiently predicts the three health states. It determines the level of degradation of the panels, which indicates priorities to corrective and predictive maintenance actions. Furthermore, it is cost-effective since it uses only electrical measurements that are already available in standard photovoltaic data acquisition systems. Above all, the approach is generic and it can be easily extrapolated to other diagnosis problems in other domains. [ABSTRACT FROM AUTHOR]

Worm gearboxes (WG) are frequently used in many areas of the industry. WG is different from other gearbox types and due to their working principles they are under high risk of wear and fault. Therefore, detection of faults that may occur in WG and taking measures accordingly are especially important for systems and facilities that require uninterrupted operation. This paper introduces an intelligent feature selection and classification method for fault diagnosis of WGs under different working conditions. The novelty of the study lies in the selection of feature sources and different loading and speed conditions for condition monitoring studies of WGs experimentally. Fault detection and classification were performed based on vibration, sound and thermal images data which were acquired and processed from the healthy and the faulty WG. Apart from classical studies, time and frequency domain features and thermal images features were extracted and evaluated singularly, dual or triple forms with ANN (Artificial Neural Network) and SVM (Support Vector Machines) classifiers. Reasonable classification performances for fault detection were observed when the features of all three sources used (99.2% with ANN and 98.7% with SVM). ANN and SVM classification performances are almost equal for fault classification (98.9% with SVM and 98.6% with ANN). The findings of the study would be a possible means for online condition monitoring of industrial plants, conveyors, elevators, etc. [ABSTRACT FROM AUTHOR]

The Open Circuit (OC) faults occurring in switches of Multilevel Converters (MLC) may lead to undesirable operation of the converter. Therefore, fault detection and its localization in minimum time are necessary. This paper focuses on the fast fault detection algorithm based on the two samples technique and the fault localization algorithm using the Entropy of Wavelet Packets (EWP) as a feature. The EWP feature is used to classify and localize the OC faults in Insulated Gate Bipolar Transistors (IGBTs) of three-phase, three-level inverter using Support Vector Machine (SVM) based fault classification algorithm. The proposed technique can detect the fault in single IGBT and multiple IGBTs in a lesser time range of microseconds to 0.33 ms. It gives better performance and accuracy (99.70%) than previously proposed SVM algorithms, as the EWP-based feature extraction process used in this paper is simple and accurate with a less computational burden. [Display omitted] • An observer-based algorithm is proposed using two samples-based technique. • The Entropy of Wavelet Packets (EWP-SVM) technique is used for fault diagnosis. • The proposed algorithm can detect the faults in a single IGBT and multiple IGBTs. • The technique is faster and accurate than techniques available in the literature. • The comparison of detection time of different techniques is also discussed. [ABSTRACT FROM AUTHOR]

Fault detection and classification are two of the challenging tasks in Modular Multilevel Converters in High Voltage Direct Current (MMC-HVDC) systems. To directly classify the raw sensor data without certain feature extraction and classifier design, a long short-term memory (LSTM) neural network is proposed and used for seven states of the MMC-HVDC transmission power system simulated by Power Systems Computer Aided Design/Electromagnetic Transients including DC (PSCAD/EMTDC). It is observed that the LSTM method can detect faults with 100% accuracy and classify different faults as well as provide promising fault classification performance. Compared with a bidirectional LSTM (BiLSTM), the LSTM can get similar classification accuracy, requiring less training time and testing time. Compared with Convolutional Neural Networks (CNN) and AutoEncoder-based deep neural networks (AE-based DNN), the LSTM method can get better classification accuracy around the middle of the testing data proportion, but it needs more training time. [ABSTRACT FROM AUTHOR]

In this paper, we explore learning methods to improve the performance of the open-circuit fault diagnosis of modular multilevel converters (MMCs). Two deep learning methods, namely, convolutional neural networks (CNN) and auto encoder based deep neural networks (AE-based DNN), as well as stand-alone SoftMax classifier are explored for the detection and classification of faults of MMC-based high voltage direct current converter (MMC-HVDC). Only AC-side three-phase current and the upper and lower bridges' currents of the MMCs are used directly in our proposed approaches without any explicit feature extraction or feature subset selection. The two-terminal MMC-HVDC system is implemented in Power Systems Computer-Aided Design/Electromagnetic Transients including DC (PSCAD/EMTDC) to verify and compare our methods. The simulation results indicate CNN, AE-based DNN, and SoftMax classifier can detect and classify faults with high detection accuracy and classification accuracy. Compared with CNN and AE-based DNN, the SoftMax classifier performed better in detection and classification accuracy as well as testing speed. The detection accuracy of AE-based DNN is a little better than CNN, while CNN needs less training time than the AE-based DNN and SoftMax classifier. [ABSTRACT FROM AUTHOR]

Fault Detection and Isolation (FDI) in Heating, Ventilation, and Air Conditioning (HVAC) systems is an important approach to guarantee the human safety of these systems. Therefore, the implementation of a FDI framework is required to reduce the energy needs for buildings and improving indoor environment quality. The main goal of this paper is to merge the benefits of multiscale representation, Principal Component Analysis (PCA), and Machine Learning (ML) classifiers to improve the efficiency of the detection and isolation of Air Conditioning (AC) systems. First, the multivariate statistical features extraction and selection is achieved using the PCA method. Then, the multiscale representation is applied to separate feature from noise and approximately decorrelate autocorrelation between available measurements. Third, the extracted and selected features are introduced to several machine learning classifiers for fault classification purposes. The effectiveness and higher classification accuracy of the developed Multiscale PCA (MSPCA)-based ML technique is demonstrated using two examples: synthetic data and simulated data extracted from Air Conditioning systems. [ABSTRACT FROM AUTHOR]