Search

Laser produced plasma (LPP) systems have been developed as a viable approach for the EUV scanner light source for optical imaging of circuit features at sub-32nm and beyond nodes on the ITRS roadmap. This paper provides a review of development progress and productization status for LPP extreme-ultra-violet (EUV) sources with performance goals targeted to meet specific requirements from leading scanner manufacturers. We present the latest results on power generation, stable and efficient collection, and clean transmission of EUV light through the intermediate focus. We report on measurements taken using a 5sr collector optic on a production system. Power transmitted to intermediate focus (IF) is shown. The lifetime of the collector mirror is a critical parameter in the development of extreme ultraviolet LPP lithography sources. Deposition of target material as well as sputtering of the multilayer coating or implantation of incident particles can reduce the reflectivity of the mirror coating during exposure. Debris mitigation techniques are used to inhibit damage from occuring, the results of these techniques are shown. We also report on the fabrication of 5sr collectors and MLM coating reflectivity, and on Sn droplet generators with droplet size down to 30μm diameter.

This paper describes the development of laser produced plasma (LPP) technology as an EUV source for advanced scanner lithography applications in high volume manufacturing. EUV lithography is expected to succeed 193 nm immersion technology for critical layer patterning below 32 nm beginning with beta generation scanners in 2009. This paper describes the development status of subsystems most critical to the performance to meet joint scanner manufacturer requirements and semiconductor industry standards for reliability and economic targets for cost of ownership. The intensity and power of the drive laser are critical parameters in the development of extreme ultraviolet LPP lithography sources. The conversion efficiency (CE) of laser light into EUV light is strongly dependent on the intensity of the laser energy on the target material at the point of interaction. The total EUV light generated then scales directly with the total incident laser power. The progress on the development of a short pulse, high power CO2 laser for EUV applications is reported. The lifetime of the collector mirror is a critical parameter in the development of extreme ultra-violet LPP lithography sources. The deposition of target materials and contaminants, as well as sputtering of the collector multilayer coating and implantation of incident particles can reduce the reflectivity of the mirror substantially over the exposure time even though debris mitigation schemes are being employed. The results of measurements of high energy ions generated by a short-pulse CO2 laser on a laser-produced plasma EUV light source with Sn target are presented. Droplet generation is a key element of the LPP source being developed at Cymer for EUV lithography applications. The main purpose of this device is to deliver small quantities of liquid target material as droplets to the laser focus. The EUV light in such configuration is obtained as a result of creating a highly ionized plasma from the material of the droplets. Liquid tin is the material of choice to be used as a target due to the relatively high CE of the laser energy into in-band EUV radiation. Results obtained with the droplet generator and technical challenges related to successful implementation of the device are discussed.

Improved performance and specific results are reported for several test and prototype extreme ultraviolet EUV light sources devel- oped for next-generation lithography. High repetition rate and high-power CO2 laser-produced plasma sources operating on tin droplet targets are described. Details of laser architecture, source chambers and system operation are given. Stable output power, efficient light collection, and clean EUV transmission could be achieved for hours of operation. We review progress during integration of light sources with collector mirrors reaching EUV power levels at intermediate focus of 60 W and 45 W, respectively, with duty cycles of 25% and 40%. Far-field EUV images of the collected light were recorded to monitor the source output perfor- mance during extended tests of collector longevity and debris protection with system operation time exceeding 50 h. Development results on EUV spectra, out-of-band OOB radiation, and ion debris obtained with dedicated metrology setups are also described. Angle-resolved mea- surements with ion energy analyzer and Faraday cups reveal the contri- butions of individual ion charge states in related spectra. Our laser- produced EUV light source technology has now reached a level of maturity in full integration where prototype sources can be delivered and pilot line introduction can be prepared. © 2009 Society of Photo-Optical Instru