Search

The establishment of in vitro naive human pluripotent stem cell cultures opened new perspectives for the study of early events in human development. The role of several transcription factors and signaling pathways have been characterized during maintenance of human naive pluripotency. However, little is known about the role exerted by the extracellular matrix (ECM) and its three-dimensional (3D) organization. Here, using an unbiased and integrated approach combining microfluidic cultures with transcriptional, proteomic, and secretome analyses, we found that naive, but not primed, hiPSC colonies are characterized by a self-organized ECM-rich microenvironment. Based on this, we developed a 3D culture system that supports robust long-term feeder-free self-renewal of naive hiPSCs and also allows direct and timely developmental morphogenesis simply by modulating the signaling environment. Our study opens new perspectives for future applications of naive hiPSCs to study critical stages of human development in 3D starting from a single cell.

An intestine-on-chip has been developed to study intestinal physiology and pathophysiology as well as intestinal transport absorption and toxicity studies in a controlled and human similar environment. Here, we report that dynamic culture of an intestine-on-chip enhances extracellular matrix (ECM) remodeling of the stroma, basement membrane production and speeds up epithelial differentiation. We developed a three-dimensional human intestinal stromal equivalent composed of human intestinal subepithelial myofibroblasts embedded in their own ECM. Then, we cultured human colon carcinoma-derived cells in both static and dynamic conditions in the opportunely designed microfluidic system until the formation of a well-oriented epithelium. This low cost and handy microfluidic device allows to qualitatively and quantitatively detect epithelial polarization and mucus production as well as monitor barrier function and ECM remodeling after nutraceutical treatment.

Skin engineering for clinical applications has gained numerous advances, however, most of the available dermis substitutes are exogenous matrices acting for a limited time. Indeed, after implantation these matrices need to be colonized by host cells such as fibroblast and endothelial cells which respectively produce their own extracellular matrix and set a vascular network within the construct. These steps are essential to guarantee implant efficacy, but they may require a long time depending on tissue dimension and lesion severity. Here we show the pre-vascularization process of a dermis equivalent featured by an endogenous matrix produced by human dermal fibroblasts. In this environment, endothelial cells were able to develop mature capillary-like-structures (CLS) as demonstrated by both the inner lumen and the positivity for alpha-SMA, laminin and collagen. The pre-vascularized dermis model (PVD) so obtained had a human matrix populated by fibroblasts as well as a complex capillary network making the construct ready to be implanted. These features make the graft very easy to handle during the surgery. In vivo results showed that 7 days after implantation CLS effectively anastomosed with host vessels. Therefore we argue that the proposed PVD may represent a new class of dermis substitute of strong clinical interest.

Engineered tissues featuring aligned ECM possess superior regenerative capabilities for the healing of damaged aligned tissues. The morphofunctional integration in the host's injury site improves if the aligned ECM elicits the unidirectional growth of vascular network. In this work we used a bottom-up tissue engineering strategy to produce endogenous and highly aligned human connective tissues with the final aim to trigger the unidirectional growth of capillary-like structures. Engineered microtissues, previously developed by our group, were casted in molds featured by different aspect ratio (AR) to obtain final centimeter-sized macrotissues differently shaped. By varying the AR from 1 to 50 we were able to vary the final shape of the macrotissues, from square to wire. We demonstrated that by increasing the AR of the maturation space hosting the microtissues, it was possible to control the alignment of the neo-synthesized ECM. The geometrical confinement conditions at AR = 50, indeed, promoted the unidirectional growth and assembly of the collagen network. The wire-shaped tissues were characterized by parallel arrangement of the collagen fiber bundles, higher persistence length and speed of migrating cells and superior mechanical properties than the square-shaped macrotissues. Interestingly, the aligned collagen fibers elicited the unidirectional growth of capillary-like structures. Statement of significance Alignment of preexisting extracellular matrices by using mechanical cues modulating cell traction, has been widely described. Here, we show a new method to align de novo synthesized extracellular matrix components in bioengineered connective tissues obtained by means of a bottom-up tissue engineering approach. Building blocks are cast in maturation chambers, having different aspect ratios, in which the in vitro morphogenesis process takes place. High aspect ratio chambers (corresponding to wire-shaped tissues) triggered spontaneous alignment of collagenous network affecting cell polarization, migration and tensile properties of the tissue as well. Aligned ECM provided a contact guidance for the formation of highly polarized capillary-like network suggesting an in vivo possible application to trigger fast angiogenesis and perfusion in damaged aligned tissues.

Cystic fibrosis is characterized by lung dysfunction involving mucus hypersecretion, bacterial infections, and inflammatory response. Inflammation triggers pro-fibrotic signals that compromise lung structure and function. At present, several in vitro cystic fibrosis models have been developed to study epithelial dysfunction but none of these focuses on stromal alterations. Here we show a new cystic fibrosis 3D stromal lung model made up of primary fibroblasts embedded in their own extracellular matrix and investigate its morphological and transcriptomic features. Cystic fibrosis fibroblasts showed a high proliferation rate and produced an abundant and chaotic matrix with increased protein content and elastic modulus. More interesting, they had enhanced pro-fibrotic markers and genes involved in epithelial function and inflammatory response. In conclusion, our study reveals that cystic fibrosis fibroblasts maintain in vitro an activated pro-fibrotic state. This abnormality may play in vivo a role in the modulation of epithelial and inflammatory cell behavior and lung remodeling. We argue that the proposed bioengineered model may provide new insights on epithelial/stromal/inflammatory cells crosstalk in cystic fibrosis, paving the way for novel therapeutic strategies.

Skeletal muscle decellularization allows the generation of natural scaffolds that retain the extracellular matrix (ECM) mechanical integrity, biological activity, and three‐dimensional (3D) architecture of the native tissue. Recent reports showed that in vivo implantation of decellularized muscles supports muscle regeneration in volumetric muscle loss models, including nervous system and neuromuscular junctional homing. Since the nervous system plays pivotal roles during skeletal muscle regeneration and in tissue homeostasis, support of reinnervation is a crucial aspect to be considered. However, the effect of decellularized muscles on reinnervation and on neuronal axon growth has been poorly investigated. Here, we characterized residual protein composition of decellularized muscles by mass spectrometry and we show that scaffolds preserve structural proteins of the ECM of both skeletal muscle and peripheral nervous system. To investigate whether decellularized scaffolds could per se attract neural axons, organotypic sections of spinal cord were cultured three dimensionally in vitro, in presence or in absence of decellularized muscles. We found that neural axons extended from the spinal cord are attracted by the decellularized muscles and penetrate inside the scaffolds upon 3D coculture. These results demonstrate that decellularized scaffolds possess intrinsic neurotrophic properties, supporting their potential use for the treatment of clinical cases where extensive functional regeneration of the muscle is required., Decellularized muscles show direct neurotrophic properties. Here, we developed a three‐dimensional in vitro model in which organotypic sections of fetal spinal cord were cultured in presence or in absence of decellularized muscles. Decellularized muscles, which proteomic composition includes both myofibers and peripheral nerve components, sustained axon sprouting and attraction of neurons.

Tumor and microenvironmental heterogeneity hinders the study of breast cancer biology and the assessment of therapeutic strategies, being associated with high variability and drug resistance. In this context, it is mandatory to develop three-dimensional breast tumor models able to reproduce this heterogeneity and the dynamic interaction occurring between tumor cells and microenvironment. Here we show a new breast cancer microtissue model (T-µTP) uniquely able to present intra-tumor morphological heterogeneity in a dynamic and responsive endogenous matrix. T-µTP consists of adenocarcinoma cells, endothelial cells and stromal fibroblasts. These three kinds of cells are totally embedded into an endogenous matrix which is rich in collagen and hyaluronic acid and it is directly produced by human fibroblasts. In this highly physiologically relevant environment, tumor cells evolve in different cluster morphologies recapitulating tumor spatiotemporal heterogeneity. Moreover they activate the desmoplastic and vascular reaction with affected collagen content, assembly and organization and the presence of aberrant capillary-like structures (CLS). Thus, T-µTP allows to outline main crucial events involved in breast cancer progression into a single model overcoming the limit of artificial extra cellular matrix surrogates. We strongly believe that T-µTP is a suitable model for the study of breast cancer and for drug screening assays following key parameters of clinical interest. Statement of Significance Tumor and microenvironmental heterogeneity makes very hurdle to find a way to study and treat breast cancer. Here we develop an innovative 3D tumor microtissue model recapitulating in vitro tumor heterogeneity. Tumor microtissues are characterized by the activation of the stromal and vascular reaction too. We underline the importance to mimic different microenvironmental tumor features in the same time and in a single tissue in order to obtain a model of spatiotemporal tumor genesis and progression, suitable for the study of tumor treatment and resistance.

Skeletal muscle is a dynamic tissue in which homeostasis and function are guaranteed by a very defined three-dimensional organization of myofibers in respect to other non-muscular components, including the extracellular matrix and the nervous network. In particular, communication between myofibers and the nervous system is essential for the overall correct development and function of the skeletal muscle. A wide range of chronic, acute and genetic-based human pathologies that lead to the alteration of muscle function are associated with modified preservation of the fine interaction between motor neurons and myofibers at the neuromuscular junction. Recent advancements in the development of in vitro models for human skeletal muscle have shown that three-dimensionality and integration of multiple cell types are both key parameters required to unveil pathophysiological relevant phenotypes. Here, we describe recent achievement reached in skeletal muscle modeling which used biomaterials for the generation of three-dimensional constructs of myotubes integrated with motor neurons.

The use of 3D cancer models will have both ethical and economic impact in drug screening and development, to promote the reduction of the animals employed in preclinical studies. Nevertheless, to be effective, such cancer surrogates must preserve the physiological relevance of the in vivo models in order to provide realistic information on drugs’ efficacy. To figure out the role of the architecture and composition of 3D cancer models on their tumor-mimicking capability, here we studied the efficacy of doxorubicin (DOX), a well-known anticancer molecule in two different 3D cancer models: our 3D breast cancer microtissue (3D-μTP) versus the golden standard represented by spheroid model (sph). Both models were obtained by using cancer associated fibroblast (CAF) and breast cancer cells (MCF-7) as cellular component. Unlike spheroid model, 3D-μTP was engineered in order to induce the production of endogenous extracellular matrix by CAF. 3D-μTP have been compared to spheroid in mono- (MCF-7 alone) and co-culture (MCF-7/CAF), after the treatment with DOX in order to study cytotoxicity effect, diffusional transport and expression of proteins related to cancer progression. Compared to the spheroid model, 3D-μTP showed higher diffusion coefficient of DOX and lower cell viability. Also, the expression of some tumoral biomarkers related to cell junctions were different in the two models. Statements of Significance Cancer biology has made progress in unraveling the mechanism of cancer progression, anyway the most of the results are still obtained by 2D cell cultures or animal models, that do not faithfully copycat the tumor microenvironment. The lack of correlation between preclinical models and in vivo organisms negatively influences the clinical efficacy of chemotherapeutic drugs. Consequently, even if a huge amount of new drugs has been developed in the last decades, still people are dying because of cancer. Pharmaceutical companies are interested in 3D tumor model as valid alternative in drug screening in preclinical studies. However, a 3D tumor model that completely mimics tumor heterogeneity is still far to achieve. In our work we compare 3D human breast cancer microtissues and spheroids in terms of response to doxorubicin and drug diffusion. We believe that our results are interesting because they highlight the potential role of the proposed tumor model in the attempts to improve efficacy tests.

The intestine is a highly heterogeneous hollow organ with biological, mechanical and chemical differences between lumen and wall. A functional human intestine model able to recreate the in vivo dynamic nature as well as the native tissue morphology is demanded for disease research and ​drug discovery. Here, we present a system, which combines an engineered three-dimensional (3D) tubular-shaped intestine model (3D In-tube) with a custom-made microbioreactor to impart the key aspects of the in vivo microenvironment of the human intestine, mimicking the rhythmic peristaltic movement. We adapted a previously established bottom-up tissue engineering approach, to produce the 3D tubular-shaped lamina propria and designed a glass microbioreactor to induce the air–liquid interface ​condition and peristaltic-like motion. Our results demonstrate the production of a villi-like protrusion and a correct spatial differentiation of the intestinal epithelial cells in enterocyte-like as well as mucus-producing-like cells on the lumen side of the 3D In-tube. This dynamic platform offers a proof-of-concept model of the human intestine. Keywords: 3D engineered tubular-shaped intestine model, Air--liquid interface, Peristaltic-like motion, Extracellular matrix, Microbioreactor

We fabricated three-dimensional microtissues with the aim to replicate in vitro the composition and the functionalities of the tumor microenvironment. By arranging either normal fibroblasts (NF) or cancer-activated fibroblasts (CAF) in two different three dimensional (3D) configurations, two kinds of micromodules were produced: spheroids and microtissues. Spheroids were obtained by means of the traditional cell aggregation technique resulting in a 3D model characterized by high cell density and low amount of extracellular proteins. The microtissues were obtained by culturing cells into porous gelatin microscaffolds. In this latter configuration, cells assembled an intricate network of collagen, fibronectin and hyaluronic acid. We investigated the biophysical properties of both 3D models in terms of cell growth, metabolic activity, texture and composition of the extracellular matrix (via histological analysis and multiphoton imaging) and cell mechanical properties (via Particle Tracking Microrheology). In the spheroid models such biophysical properties remained unchanged regardless to the cell type used. In contrast, normal-microtissues and cancer-activated-microtissues displayed marked differences. CAF-microtissues possessed higher proliferation rate, superior contraction capability, different micro-rheological properties and an extracellular matrix richer in collagen fibronectin and hyaluronic acid. At last, multiphoton investigation revealed differences in the collagen network architecture. Taken together, these results suggested that despite to cell spheroids, microtissues better recapitulate the important differences existing in vivo between normal and cancer-activated stroma representing a more suitable system to mimic in vitro the stromal element of the tumor tissues. Statement of Significance This work concerns the engineering of tumor tissue in vitro. Tumor models serve as biological equivalent to study pathologic progression and to screen or validate the drugs efficacy. Tumor tissue is composed by malignant cells surviving in a microenvironment, or stroma. Stroma plays a pivotal role in cancer progression. Current in vitro models, i.e. spheroids, can’t replicate the phenomena related to the tumor stroma remodeling. For this reason, to better replicate the tumor physiology in vitro that include functional and morphological changes, a novel 3D cancer model is proposed.

In tissue engineering there is growing interest in fabricating highly engineered platforms designed to instruct cells towards the synthesis of tissues that reproduce their natural counterpart. In this context, a fundamental factor to take into account is the control over the final tissue orientation, especially for what concerns the replication of load-bearing tissues whose functions are strictly related to their microstructural organization. Starting from this point, in this work we have engineered a gelatin-based hydrogel in order to be patterned by 2-photon polymerization (2PP) lithography for the fabrication of instructive free standing building blocks designed to produce anisotropic collagen-based μtissues. Biological results clearly highlighted the strong relationship between μtissue orientation and such topographies, which resulted in a crucial element in the production of highly anisotropic μtissues.

The small intestine is the major site for digestion, drug and nutrient absorption, as well as a primary site for many diseases. Current in vitro gut models fail in reproducing the complex intestinal extracellular matrix (ECM) network of the lamina propria and the peculiar architecture of the crypt-villus axis. Here we proposed a novel in vitro human intestine model that mimics the intestinal stromal topography and composition and strictly reproduces the tissue polarity with the crypt-villus architecture. First we developed a 3D human intestinal stromal equivalent (3D-ISE) composed of human intestinal subepithelial myofibroblasts (ISEMFs) embedded in their own extracellular matrix. Then, we seeded human colon carcinoma-derived cells (Caco-2) onto flat or patterned cell-synthetized stromal equivalent structure and cultured them until the formation of a well-oriented epithelium. We demonstrated that the patterned stroma increases the absorbing surface area, the epithelial proliferation rate, and the density of microvilli. In addition it induces changes in the biological functions of the epithelial cells such as enzymes and mucus production, polarization and tightness showing a physiological cell-lineage compartmentalization along the crypt/villi axes with the undifferentiated phenotypes at the base. At last, we reproduced an inflamed intestinal tissue model in which we identified the contribution of the stromal microenvironment by molecular (cytokines release and MMPs production) and immunofluorescence analyses and the effects of the epithelial-stromal cross-talk in the intestinal innate immunity by multiphoton investigation that revealed differences in the collagen network architecture. STATEMENT OF SIGNIFICANCE: The intestinal stroma morphology and composition has a fundamental role in crypt-villus development and appropriate epithelial cell-lineage compartmentalization. On this base, here we develop an engineered organotypic model of human intestine equivalent in which a functional epithelial/ECM crosstalk is recapitulated. Due to its accessible luminal surface it provides a new platform for preclinical studies of mucosal immunology and bowel inflammation as well as the assessment of pharmaco-toxicity studies.

Current in vitro models of human intestine commonly fail to mimic the complex intestinal functions and features required for drug development and disease research. Here, we deeply investigate the interaction existing between epithelium and the underneath stroma, and its role in the epithelium morphogenesis. We cultured human intestinal subepithelial myofibroblasts (ISEMFs) in two different 3D configurations: 3D-collagen gel equivalent (3D-CGE) and 3D cell-synthetized stromal equivalent (3D-CSSE). The 3D-CGEs were obtained by means of the traditional collagen-based cell technique and the 3D-CSSE were obtained by bottom-up tissue engineering strategy. The biophysical properties of both 3D models with regard to cell growth and composition (via histological analysis, immunofluorescence, and multiphoton imaging) were assessed. Then, human colorectal adenocarcinoma cell line (CaCo-2) was cultured on both the 3D constructs in order to produce the intestinal model. We identified higher levels of matrix-associated proteins from ISEMFs cultured in 3D-CSSE compared to 3D-CGE. Furthermore, multiphoton investigation revealed differences in the collagen network architecture in both models. At last, the more physiologically relevant stromal environment of the 3D-CSSE drove the CaCo-2 cell differentiation toward the four different type of intestinal epithelial cells (absorptive, mucus-secretory, enteroendocrine, and Paneth) phenotype and promotes, in contrast to the 3D-CGE, the production of the basement membrane. Taken together, these results highlight a fundamental role of the 3D stromal environment in addressing a correct epithelium morphogenesis as well as epithelial-stromal interface establishment.

Utra Violet type A (UVA) exposure strongly affects the ageing of human skin by modifying both epidermis and dermis and their cross talk as well. The possibility to get a deep understanding in vitro of such crucial mechanism would have a huge impact in the development of antiageing compounds. Here, we present a full thickness model of human skin equivalent formed by a millimeter-sized dermis completely composed of fibroblasts embedded in their own extracellular matrix. We show that such endogenous nature of the dermis compartment allows the replication of the complexity of the mutual interactions occurring between cellular and extracellular components of the skin under UVA exposure: (a) oxidative stress formation in the whole tissue (dermis and epidermis); (b) senescence of germinative layer of epidermal tissue in terms of p63, ki67, and activated caspase-3 regulation; (c) modification of the collagenous network architecture in the dermis compartment. By using this human skin model, it is possible to study a widely shared assumptions not yet proved in vitro such the effect of UVA on the self-renewal capability of skin stem cells.

Hydrogels are widely used as matrices for cell growth due to the their tuneable chemical and physical properties, which mimic the extracellular matrix of natural tissue. The microfabrication of hydrogels into arbitrarily complex 3D structures is becoming essential for numerous biological applications, and in particular for investigating the correlation between cell shape and cell function in a 3D environment. Micrometric and sub-micrometric resolution hydrogel scaffolds are required to deeply investigate molecular mechanisms behind cell-matrix interaction and downstream cellular processes. We report the design and development of high resolution 3D gelatin hydrogel woodpile structures by two-photon crosslinking. Hydrated structures of lateral linewidth down to 0.5 µm, lateral and axial resolution down to a few µm are demonstrated. According to the processing parameters, different degrees of polymerization are obtained, resulting in hydrated scaffolds of variable swelling and deformation. The 3D hydrogels are biocompatible and promote cell adhesion and migration. Interestingly, according to the polymerization degree, 3D hydrogel woodpile structures show variable extent of cell adhesion and invasion. Human BJ cell lines show capability of deforming 3D micrometric resolved hydrogel structures. Statement of Significance The design and development of high resolution 3D gelatin hydrogel woodpile structures by two-photon crosslinking is reported. Significantly, topological and mechanical conditions of polymerized gelatin structures were suitable for cell accommodation in the volume of the woodpiles, leading to a cell density per unit area comparable to the bare substrate. The fabricated structures, presenting micrometric features of high resolution, are actively deformed by cells, both in terms of cell invasion within rods and of cell attachment in-between contiguous woodpiles. Possible biological targets for this 3D approach are customized 3D tissue models, or studies of cell adhesion, deformation and migration.

Many of the existing three-dimensional (3D) cancer models in vitro fail to represent the entire complex tumor microenvironment composed of cells and extra cellular matrix (ECM) and do not allow a reliable study of the tumoral features and progression. In this paper we reported a strategy to produce 3D in vitro microtissues of pancreatic ductal adenocarcinoma (PDAC) for studying the desmoplastic reaction activated by the stroma–cancer crosstalk. Human PDAC microtissues were obtained by co-culturing pancreatic cancer cells (PT45) and normal or cancer-associated fibroblasts within biodegradable microcarriers in a spinner flask bioreactor. Morphological and histological analyses highlighted that the presence of fibroblasts resulted in the deposition of a stromal matrix rich in collagen leading to the formation of tumor microtissues composed of a heterotypic cell population embedded in their own ECM. We analyzed the modulation of expression of ECM genes and proteins and found that when fibroblasts were co-cultured with PT45, they acquired a myofibroblast phenotype and expressed the desmoplastic reaction markers. This PDAC microtissue, closely recapitulating key PDAC microenvironment characteristics, provides a valuable tool to elucidate the complex stroma–cancer interrelationship and could be used in a future perspective as a testing platform for anticancer drugs in tissue-on-chip technology. Statement of Significance Tumor microenvironment is extremely complex and its organization is due to the interaction between different kind of cells and the extracellular matrix. Tissue engineering could give the answer to the increasing need of 3D culture model that better recapitulate the tumor features at cellular and extracellular level. We aimed in this work at developing a microtissue tumor model by mean of seeding together cancer cells and fibroblasts on gelatin microsphere in order to monitor the crosstalk between the two cell populations and the endogenous extracellular matrix deposition. Results are of particular interest because of the need of heterotypic cancer model that can replicate the complexity of the tumor microenvironment and could be used as drug screening platform.

In this work, a new model of breast cancer is proposed featuring both epithelial and stromal tissues arranged on a microfluidic chip. The main task of the work is the in vitro replication of the stromal activation during tumor epithelial invasion. The activation of tumor stroma and its morphological/compositional changes play a key role in tumor progression. Despite emerging evidences, to date the activation of tumor stroma in vitro has not been achieved yet. The tumor-on-chip proposed in this work is built in order to replicate the features of its native counterpart: multicellularity (tumor epithelial cell and stromal cell); 3D engineered stroma compartment composed of cell-assembled extracellular matrix (ECM); reliable 3D tumor architecture. During tumor epithelial invasion the stroma displayed an activation process at both cellular and ECM level. Similarly of what repeated in vivo, ECM remodeling is found in terms of hyaluronic acid and fibronectin overexpression in the stroma compartment. Furthermore, the cell-assembled ECM featuring the stromal tissue, allowed on-line monitoring of collagen remodeling during stroma activation process via real time multiphoton microscopy. Also, trafficking of macromolecules within the stromal compartment has been monitored in real time.

Several skin equivalent models have been developed to investigate in vitro the re-epithelialization process occurring during wound healing. Although these models recapitulate closure dynamics of epithelial cells, they fail to capture how a wounded connective tissue rebuilds its 3D architecture until the evolution in a scar. Here, the in vitro tissue repair dynamics of a connective tissue is replicated by using a 3D human dermis equivalent (3D-HDE) model composed of fibroblasts embedded in their own extracellular matrix (ECM). After inducing a physical damage, 3D-HDE undergoes a series of cellular and extracellular events quite similar to those occurring in the native dermis. In particular, fibroblasts differentiation toward myofibroblasts phenotype and neosynthesis of hyaluronic acid, fibronectin, and collagen during the repair process are assessed. Moreover, tissue reorganization after physical damage is investigated by measuring the diameter of bundles and the orientation of fibers of the newly formed ECM network. Finally, the ultimate formation of a scar-like tissue as physiological consequence of the repair and closure process is demonstrated. Taking together, the results highlight that the presence of cell-assembled and responsive stromal components enables quantitative and qualitative in vitro evaluation of the processes involved in scarring during wound healing.

Tissue-engineered constructs can be fabricated by the assembly of smaller building blocks in order to mimic much of the native biology that is often made from repeating functional units. Our aim was to realize a three-dimensional (3-D) tissue-like construct in vitro by inducing the assembly of functional micrometric tissue precursors (microTPs). MicroTPs were obtained by dynamic cell seeding of bovine fibroblasts on porous gelatine microcarriers using a spinner flask bioreactor. During the dynamic seeding, cells adhered, proliferated and synthesized a thin layer of extracellular matrix (ECM) in and around the macroporous beads, generating the microTPs. The analysis showed that the ECM produced was rich in type I collagen. The cells and ECM layer around the microTPs allowed their biological sintering via cell-cell and cell-matrix interaction after only a few days of dynamic seeding. The assembling ability of microTPs was exploited by placing them in a maturation chamber. After 1 week of culture disc-shaped constructs (1cm in diameter, 1mm in thickness) of completely assembled microTPs were collected. The biohybrid obtained presented both a homogeneous and compact aspect. Moreover, histological and immunohistochemical analyses revealed an abundant ECM, rich in type I collagen, interconnecting the microTPs. The results obtained in this survey pave the way to realizing a 3-D dermal tissue equivalent by means of a bottom-up tissue engineering approach.

The realization of biologically relevant human tissue equivalents as an in vitro model to investigate human diseases, as well as to test the efficacy or toxicity of novel compounds, is emerging as a new challenge in tissue engineering. Currently, the in vitro three-dimensional (3D) dermis model mainly involves the use of cells embedded in exogenous non-human matrices. However, such models feature biological and functional disparities with native dermis, therefore limiting their relevance to the in vivo situation. The purpose of this study was to provide a reliable endogenous human dermal equivalent (HDE) able to recapitulate the extracellular matrix (ECM) remodelling of the native dermis occurring after external damage. To this end, UVA irradiation was used to induce photodamage to both the HDE and to a fibroblast-populated collagen matrix. The photodamage was investigated at the cellular and ECM level and the results showed that, although a cellular response was detected in both systems, no ECM reorganization characteristic of the in vivo photo-aged dermis could be detected in the fibroblast-populated collagen matrix. In contrast in the HDE, the neosynthesized ECM recapitulated the characteristic ageing behaviour of the dermis found in vivo, in terms of collagen and hyaluronic acid synthesis as well as collagen organization remodelling. This study therefore demonstrates the role of the endogenous ECM in recapitulating in vitro the functionality of the human dermis and the proposed HDE as a novel tool for photoprotection trials. Copyright © 2016 John Wiley & Sons, Ltd.

The formation of severe scars still represents the result of the closure process of extended and deep skin wounds. To address this issue, different bioengineered skin substitutes have been developed but a general consensus regarding their effectiveness has not been achieved yet. It will be shown that bioengineered skin substitutes, although representing a valid alternative to autografting, induce skin cells in repairing the wound rather than guiding a regeneration process. Repaired skin differs from regenerated skin, showing high contracture, loss of sensitivity, impaired pigmentation and absence of cutaneous adnexa (i.e., hair follicles and sweat glands). This leads to significant mobility and aesthetic concerns, making the development of more effective bioengineered skin models a current need. The objective of this review is to determine the limitations of either commercially available or investigational bioengineered skin substitutes and how advanced skin tissue engineering strategies can be improved in order to completely restore skin functions after severe wounds.

A tissue engineered oesophagus could overcome limitations associated with oesophageal substitution. Combining decellularized scaffolds with patient-derived cells shows promise for regeneration of tissue defects. In this proof-of-principle study, a two-stage approach for generation of a bio-artificial oesophageal graft addresses some major challenges in organ engineering, namely: (i) development of multi-strata tubular structures, (ii) appropriate re-population/maturation of constructs before transplantation, (iii) cryopreservation of bio-engineered organs and (iv) in vivo pre-vascularization. The graft comprises decellularized rat oesophagus homogeneously re-populated with mesoangioblasts and fibroblasts for the muscle layer. The oesophageal muscle reaches organised maturation after dynamic culture in a bioreactor and functional integration with neural crest stem cells. Grafts are pre-vascularised in vivo in the omentum prior to mucosa reconstitution with expanded epithelial progenitors. Overall, our optimised two-stage approach produces a fully re-populated, structurally organized and pre-vascularized oesophageal substitute, which could become an alternative to current oesophageal substitutes., Combining decellularised scaffolds with patient-derived cells holds promise for bioengineering of functional tissues. Here the authors develop a two-stage approach to engineer an oesophageal graft that retains the structural organisation of native oesophagus.

There is a growing interest for developing organotypic cervical models by using primary cervical cells that are able to reproduce the physiological relevant stromal microenvironment and the distinctive histology of the native cervical epithelium. Here for the first time it is reported the production of an organotypic cervical model featured by a scaffold-free stromal tissue resembling the extracellular matrix (ECM) composition and organization of the native counterpart as well as a completely well-differentiated epithelium. To reach this aim, human cervical microtissue precursors have been produced, characterized, and used as functional building units to fabricate a cell-synthesized cervical stroma equivalent by means of a bottom-up approach. Immunotypization, and molecular and morphological analyses reveal the extent of fundamental epithelial biomarkers and the presence of collagen and noncollagenous molecules, demonstrating that the natural tissue architecture and biological characteristics of cervical tissues are reproduced. The results of this study suggest that the bottom-up technology used to produce these 3D human cervical equivalents provides a fully functional organotypic cervical model that may be used as a valuable tool to investigate the epithelial-stromal interactions as well as for testing new therapeutics in vitro.

The fabrication of functional tissue units is one of the major challenges in tissue engineering due to their in vitro use in tissue-on-chip systems, as well as in modular tissue engineering for the construction of macrotissue analogs. In this work, we aim to engineer dermal tissue micromodules obtained by culturing human dermal fibroblasts into porous gelatine microscaffold. We proved that such stromal cells coupled with gelatine microscaffolds are able to synthesize and to assemble an endogenous extracellular matrix (ECM) resulting in tissue micromodules, which evolve their biophysical features over the time. In particular, we found a time-dependent variation of oxygen consumption kinetic parameters, of newly formed ECM stiffness and of micromodules self-aggregation properties. As consequence when used as building blocks to fabricate larger tissues, the initial tissue micromodules state strongly affects the ECM organization and maturation in the final macrotissue. Such results highlight the role of the micromodules properties in controlling the formation of three-dimensional macrotissue in vitro, defining an innovative design criterion for selecting tissue-building blocks for modular tissue engineering.

Tissue-on-chip (TOC) systems aim at replicating complex biological dynamics in vitro with the potential either to improve the understanding of human biology or to develop more accurate therapeutic strategies. To replicate faithfully the intricate interrelationships between cells and their surrounding microenvironment, the three-dimensional (3D) tissue model must possess a responsive extracellular matrix (ECM). ECM remodeling plays a pivotal role in guiding cells and tissues functions and such aspect is somewhat denied during in vitro studies. For this purpose, we fabricated a micro-perfusion bioreactor capable to sustain the viability of 3D engineered tissue models recapitulating the process of the native ECM deposition and assembly. Engineered human dermis micro-tissue precursors (HD-mu TP) were used as building blocks to generate a final tissue. HD-mu TP were loaded in the perfusion space of the micro-perfusion bioreactor and, under the superimposition of different fluid dynamic regimes and biochemical stimulation, they synthesized new collagen proteins that were, then, assembled in the perfusion space forming a continuum of cells embedded in their own ECM. The micro-perfusion bioreactor was fabricated to allow the on-line monitoring of the oxygen consumption and the assembly of the newly formed collagen network via real time acquisition of the second harmonic generation (SHG) signal. The possibility to detect the collagen reorganization due to both fluid dynamic and biochemical stimulation, let us to define the optimal perfusion configuration in order to obtain a TOC system based on an endogenous and responsive ECM.

The in vitro fabrication of an endogenous cardiac muscle would have a high impact for both in vitro studies concerning cardiac tissue physiology and pathology, as well as in vivo application to potentially repair infarcted myocardium. To reach this aim, we engineered a new class of cardiac tissue precursor (CTP), specifically conceived in order to promote the synthesis and the assembly of a cardiac extracellular matrix (ECM). The CTPs were obtained by culturing a mixed cardiac cell population, composed of myocyte and non-myocyte cells, into porous gelatin microspheres in a dynamic bioreactor. By engineering the culture conditions, the CTP developed both beating properties and an endogenous immature cardiac ECM. By following a bottom-up approach, a macrotissue was fabricated by molding and packing the engineered tissue precursor in a maturation chamber. During the macrotissue formation, the tissue precursors acted as cardiac tissue depots by promoting the formation of an endogenous and interconnected cardiac network embedding the cells and the microbeads. The myocytes cell fraction pulled on ECM network and induced its compaction against the internal posts represented by the initial porous microbeads. This reciprocal interplay induced ECM consolidation without the use of external biophysical stimuli by leading to the formation of a beating and endogenous macrotissue. We have thus engineered a new class of cardiac micromodules and show its potential for the fabrication of endogenous cardiac tissue models useful for in vitro studies that involve the cardiac tissue remodeling.

Three-dimensional (3D) cell cultures have recently garnered great attention because they promote levels of cells differentiation and tissue organisation not possible in conventional two-dimensional (2D) culture systems. Cancer development is a complex process regulated by interactions between epithelial cells, activated stromal cells, and soluble and insoluble components of the extracellular matrix (ECM). As a consequence, in the field of cancer biology a 3D tumour model that accurately recreates the in vivo tumour phenotype would be a valuable tool for studying tumour biology and would allow better pre-clinical evaluation of anticancer drug candidates. Here, we review the 3D tumour models currently available and the more advanced techniques from the tissue-engineering field used to create a more clinically accurate ex vivo tumour model. Moreover, we highlight the drastic differences in drug responses between 3D and 2D models and give a glance to the emerging multi-organ microdevices that can mimic in vivo tissue-tissue interactions.

Tissue engineering creates biological tissues that aim to improve the function of diseased or damaged tissues. In this chapter, we examine the promise and shortcomings of “top-down” and “bottom-up” approaches for creating engineered biological tissues. In top-down approaches, the cells are expected to populate the scaffold and create the appropriate extracellular matrix and microarchitecture often with the aid of a bioreactor that furnish the set of stimuli required for an optimal cellular viability. Specifically, we survey the role of cell material interaction on oxygen metabolism in three-dimensional (3D) in vitro cultures as well as the time and space evolution of the transport and biophysical properties during the development of de novo synthesized tissue-engineered constructs. We show how to monitor and control the evolution of these parameters that is of crucial importance to process biohybrid constructs in vitro as well as to elaborate reliable mathematical model to forecast tissue growth under specific culture conditions. Furthermore, novel strategies such as bottom-up approaches to build tissue constructs in vitro are examined. In this fashion, tissue building blocks with specific microarchitectural features are used as modular units to engineer biological tissues from the bottom up. In particular, the attention will be focused on the use of cell seeded microbeads as functional building blocks to realize 3D complex tissue. Finally, a challenge will be the potential integration of bottom-up techniques with more traditional top-down approaches to create more complex tissues than are currently achievable using either technique alone by optimizing the advantages of each technique.

During the development of de novo synthesized cartilage tissue engineered constructs, transport and biophysical properties are expected to change in time and space. Monitoring and control of the evolution of these parameters are of crucial importance to process biohybrid constructs in vitro. The aim of this work was to measure fluid and macromolecular transport and evolution of mechanical properties of tissue-engineered cartilage constructs as a function of culture time and extracellular matrix (ECM) production. It was found, in agreement with other literature reports, that mechanical and fluid transport properties of the constructs correlated well with time of culture and glycosaminoglycan (GAG) content. Further, diffusion coefficients of 2 probes, dextran (500 kDa) and bovine serum albumin (BSA), correlated well with GAG production. Diffusion coefficients (D) were measured with high spatial and temporal resolution by fluorescent recovery after photobleaching (FRAP). Diffusivity steadily decreases with time while it does not vary through the thickness of the specimen. On the basis of these results, an empirical relationship between diffusion coefficient and GAG content was proposed for the 2 probes analyzed. The results of this study provide useful information to optimize and control the tissue culture process in vitro.

The realization of biologically relevant human tissue equivalents as an in vitro model to investigate human diseases, as well as to test the efficacy or toxicity of novel compounds, is emerging as a new challenge in tissue engineering. Currently, the in vitro three-dimensional (3D) dermis model mainly involves the use of cells embedded in exogenous non-human matrices. However, such models feature biological and functional disparities with native dermis, therefore limiting their relevance to the in vivo situation. The purpose of this study was to provide a reliable endogenous human dermal equivalent (HDE) able to recapitulate the extracellular matrix (ECM) remodelling of the native dermis occurring after external damage. To this end, UVA irradiation was used to induce photodamage to both the HDE and to a fibroblast-populated collagen matrix. The photodamage was investigated at the cellular and ECM level and the results showed that, although a cellular response was detected in both systems, no ECM reorganization characteristic of the in vivo photo-aged dermis could be detected in the fibroblast-populated collagen matrix. In contrast in the HDE, the neosynthesized ECM recapitulated the characteristic ageing behaviour of the dermis found in vivo, in terms of collagen and hyaluronic acid synthesis as well as collagen organization remodelling. This study therefore demonstrates the role of the endogenous ECM in recapitulating in vitro the functionality of the human dermis and the proposed HDE as a novel tool for photoprotection trials. Copyright © 2016 John WileySons, Ltd.

Adult muscle stem cells, or satellite cells have essential roles in homeostasis and regeneration of skeletal muscles. Satellite cells are located within a niche that includes myofibers and extracellular matrix. The function of specific extracellular matrix molecules in regulating SCs is poorly understood. Here, we show that the extracellular matrix protein collagen VI is a key component of the satellite cell niche. Lack of collagen VI in Col6a1(-/-) mice causes impaired muscle regeneration and reduced satellite cell self-renewal capability after injury. Collagen VI null muscles display significant decrease of stiffness, which is able to compromise the in vitro and in vivo activity of wild-type satellite cells. When collagen VI is reinstated in vivo by grafting wild-type fibroblasts, the biomechanical properties of Col6a1(-/-) muscles are ameliorated and satellite cell defects rescued. Our findings establish a critical role for an extracellular matrix molecule in satellite cell self-renewal and open new venues for therapies of collagen VI-related muscle diseases.

In this study we realized a three-dimensional human dermis equivalent (3D-HDE) and, by exploiting multi-photon microscopy (MPM) we validated its use as an in vitro model to study collagen network re-arrangement under simulated solar exposure. The realization of 3D-HDE has been pursed by means of a bottom-up tissue engineering strategy that comprises firstly the fabrication of micron sized tissue building blocks and then their assembly in a 3D tissue construct. The building blocks injected in a maturation chamber, and cultured under optimized culture condition, were able to fuse due to the establishment of cell-cell and cell-extra cellular matrix (ECM) interactions that induced a biological sintering process resulting in 3D-HDE production. The final 3D tissue was made-up by fibroblasts embedded in their own ECM rich in endogenous collagen type I, resembling the composition and the architecture of native human dermis. Second Harmonic Generation (SHG) and Two-Photon Excited Fluorescence (TPEF) imaging have been exploited to assess modification in collagen assembly before and after UV irradiation. Textural features and SHG to TPFE ratio of the endogenous ECM within 3D-HDE have been shown to vary after UVA irradiation, proving the hypothesis that the 3DHDE realized can be used as biological platform in vitro to study ECM modifications induced by photo-damage.

The development of composite scaffolds with well-organized architecture and multi-scale properties (i.e. porosity, degradation) represents a valid approach for achieving a tissue-engineered construct capable of reproducing the medium- and long-term in vitro behaviour of hierarchically complex tissues such as spongy bone. To date, the implementation of scaffold design strategies able to summarize optimal scaffold architecture as well as intrinsic mechanical, chemical and fluid transport properties still remains a challenging issue. In this study, poly ɛ -caprolactone/polylactid acid (PCL/PLA) tubular devices (fibres of PLA in a PCL matrix) obtained by phase inversion/salt leaching and filament winding techniques were proposed as cell instructive scaffold for bone osteogenesis. Continuous fibres embedded in the polymeric matrix drastically improved the mechanical response as confirmed by compression elastic moduli, which vary from 0.214 ± 0.065 to 1.174 ± 0.143 MPa depending on the relative fibre/matrix and polymer/solvent ratios. Moreover, computational fluid dynamic simulations demonstrated the ability of composite structure to transfer hydrodynamic forces during in vitro culture, thus indicating the optimal flow rate conditions that, case by case, enables specific cellular events—i.e. osteoblast differentiation from human mesenchymal stem cells (hMSCs), mineralization, etc. Hence, we demonstrate that the hMSC differentiation preferentially occurs in the case of higher perfusion rates—over 0.05 ml min –1 —as confirmed by the expression of alkaline phosphate and osteocalcin markers. In particular, the highest osteopontin values and a massive mineral phase precipitation of bone-like phases detected in the case of intermediate flow rates (i.e. 0.05 ml min –1 ) allows us to identify the best condition to stimulate the bone extracellular matrix in-growth, in agreement with the hydrodynamic model prediction. All these results concur to prove the succesful use of tubular composite as temporary device for long bone treatment.

Bottom-up approach is an appealing strategy to build complex three-dimensional (3D) viable tissues in vitro starting from microtissue precursors (μTP). In this work we biofabricated a thick dermal-like tissue by sequentially combining two steps: a μTPs production and assembly followed by tissue maturation in a purpose-built bioreactor. The μTPs were produced by first seeding bovine primary fibroblasts on gelatine microparticles and then cultivating them in stirring conditions until a thick layer of ∼80μm of de novo synthesized extracellular matrix uniformly covered the microparticle surface. The μTPs were then loaded into a cylindrical chamber (2mm in depth and 35mm in diameter) and let to maturate and assemble into a 3D viable biohybrid tissue under specific fluid flow conditions. Several combinations of perfusion and/or tangential fluid flow were applied and their effect on the tissue formation and maturation was assessed. Results show that structural composition and mechanical features of the final 3D bioengineered tissue are strongly affected by the hydrodynamic environment and demonstrate that by optimizing culture conditions a 3D viable tissue with properties similar to that of native derma could be produced. © 2011 Mary Ann Liebert, Inc.

Collagen VI is an extracellular matrix protein with critical roles in maintaining muscle and skin integrity and function. Skin abnormalities, including predisposition to keratosis pilaris and abnormal scarring, were described in Ullrich congenital muscular dystrophy (UCMD) and Bethlem myopathy (BM) patients carrying mutations in COL6A1, COL6A2, and COL6A3 genes, whereas COL6A5, previously designated as COL29A1, was linked to atopic dermatitis. To gain insight into the function of the newly identified collagen VI α5 and α6 chains in human skin, we studied their expression and localization in normal subjects and in genetically characterized UCMD and BM patients. We found that localization of α5, and to a lesser extent α6, is restricted to the papillary dermis, where the protein mainly colocalizes with collagen fibrils. In addition, both chains were found around blood vessels. In UCMD patients with COL6A1 or COL6A2 mutations, immunolabeling for α5 and α6 was often altered, whereas in a UCMD and in a BM patient, each with a COL6A3 mutation, expression of α5 and α6 was apparently unaffected, suggesting that these chains may substitute for α3, forming α1α2α5 or α1α2α6 heterotrimers.

Background Extracellular matrix (ECM) is a dynamic and complex environment characterized by biophysical, mechanical and biochemical properties specific for each tissue and able to regulate cell behavior. Stem cells have a key role in the maintenance and regeneration of tissues and they are located in a specific microenvironment, defined as niche. Scope of review We overview the progresses that have been made in elucidating stem cell niches and discuss the mechanisms by which ECM affects stem cell behavior. We also summarize the current tools and experimental models for studying ECM–stem cell interactions. Major conclusions ECM represents an essential player in stem cell niche, since it can directly or indirectly modulate the maintenance, proliferation, self-renewal and differentiation of stem cells. Several ECM molecules play regulatory functions for different types of stem cells, and based on its molecular composition the ECM can be deposited and finely tuned for providing the most appropriate niche for stem cells in the various tissues. Engineered biomaterials able to mimic the in vivo characteristics of stem cell niche provide suitable in vitro tools for dissecting the different roles exerted by the ECM and its molecular components on stem cell behavior. General significance ECM is a key component of stem cell niches and is involved in various aspects of stem cell behavior, thus having a major impact on tissue homeostasis and regeneration under physiological and pathological conditions. This article is part of a Special Issue entitled Matrix-mediated cell behaviour and properties., Highlights • Stem cells have a key role in the maintenance and regeneration of tissues. • The extracellular matrix is a critical regulator of stem cell function. • Stem cells reside in a dynamic and specialized microenvironment denoted as niche. • The extracellular matrix represents an essential component of stem cell niches. • Bioengineered niches can be used for investigating stem cell–matrix interactions.

Objective: To determine the clinical and molecular features of a new phenotype related to collagen VI myopathies. Methods: We examined two patients belonging to a consanguineous family affected by myosclerosis myopathy, screened for mutations of collagen VI genes, and performed a detailed biochemical and morphologic analysis of the muscle biopsy and cultured fibroblasts. Results: The patients had a novel homozygous nonsense COL6A2 mutation (Q819X); the mutated messenger RNA escaped nonsense-mediated decay and was translated into a truncated α2(VI) chain, lacking the sole C2 domain. The truncated chain associated with the other two chains, giving rise to secreted collagen VI. Monomers containing the truncated chain were assembled into dimers, but tetramers were almost absent; secreted collagen VI was quantitatively reduced and structurally abnormal in cultured fibroblasts. Mutated collagen did not correctly localize in the basement membrane of muscle fibers and was absent in the capillary wall. Ultrastructural analysis of muscle showed an unusual combination of basement membrane thickening and duplication, and increased number of pericytes. Conclusions: This familial case has the characteristic features of myosclerosis myopathy and carries a homozygous COL6A2 mutation responsible for a peculiar pattern of collagen VI defects. Our study demonstrates that myosclerosis myopathy should be considered a collagen VI disorder allelic to Ullrich congenital muscular dystrophy and Bethlem myopathy.

Background Mutations within the C-terminal region of the COL6A1 gene are only detected in Ullrich/Bethlem patients on extremely rare occasions. Case presentation Herein we report two Brazilian brothers with a classic Ullrich phenotype and compound heterozygous for two truncating mutations in COL6A1 gene, expected to result in the loss of the α1(VI) chain C2 subdomain. Despite the reduction in COL6A1 RNA level due to nonsense RNA decay, three truncated alpha1 (VI) chains were produced as protein variants encoded by different out-of-frame transcripts. Collagen VI matrix was severely decreased and intracellular protein retention evident. Conclusion The altered deposition of the fibronectin network highlighted abnormal interactions of the mutated collagen VI, lacking the α1(VI) C2 domain, within the extracellular matrix, focusing further studies on the possible role played by collagen VI in fibronectin deposition and organization.