Search

Mine disasters, as associated problems in the development of coal resources, always threaten the life safety of miners and the production safety of enterprises. In coal roadway excavation, the coal in front of the excavation face is in a state of concentrated stress and the deformation is serious. The instability of the coal seam under stress is an important cause of the occurrence of coal and gas outburst. Thus, knowing the mechanical characteristics of surrounding rock in front of the working face is of great significance for deep understanding and effective prevention and control of coal-rock dynamic disasters. By analyzing the characteristics of stress evolution and deformation and failure in front of the heading face, the analytical solution of plastic region distribution in front of the heading face is obtained. According to the established mechanical model, MATLAB numerical calculation software is used to analyze different examples. The influence of different mechanical parameters on the stress state of the working face is studied. The influence parameters of the morphological characteristics of the plastic region are determined, and the change law and characteristics of the plastic region in front of the working face are studied. At the same time, through the characteristics of stress field, the working face dynamic risk assessment of coal and rock dynamic disaster can be realized, which can provide a powerful guarantee for the prevention and control of gas dynamic disasters in deep mine. [ABSTRACT FROM AUTHOR]

Coal and gas outburst is a serious disaster in the mining, and crosscut coal is the most prone to cause the coal and gas outburst. In order to study the mechanism of outburst, this paper studied the stress distribution characteristics in front of the working face in the process of rock roadway driving before implementing crosscut coal firstly. On this basis, the hypothesis of stress distribution on the "strong and soft face" of coal-rock mass was proposed. And by using the hypothesis, the mechanical equation for the parameter changes of the plastic zone in front of the working face in crosscut coal was established, and the width and morphological characteristics of the plastic zone in crosscut coal were analyzed. The results show that during the process, as the working face moves forward, the shape distribution of the plastic zone in front of the working face changes from the "semielliptical" to "semibutterfly," And based on the distribution characteristics of plastic zone in working face in crosscut coal, modification proposals for outburst-prevention measures were proposed and provided technical support for the outburst-prevention measures and key parameters setting to prevent the coal outburst in crosscut coal. [ABSTRACT FROM AUTHOR]