Search

The most widespread wood species in the Portuguese forest and the most widely utilized are maritime pine (Pinus pinaster) and eucalyptus (Eucalyptus globulus Labill). In the case of eucalyptus, except for the pulping sector, it might have limited usage due to drying issues and low permeability. Microwave (MW) treatment is a technology that has been used to improve wood species' permeability. Therefore, the present paper aimed to evaluate the MW treatment of both Portuguese wood species and to investigate the effects of different MW treatments on wood's density, water uptake capability, modulus of rupture (MOR), and modulus of elasticity (MOE). Using small clear wood specimens, two MW powers were used, 700 and 1200 W, and the samples were submitted to successive MW cycles of 2 min till they reached the required dryness. The results showed that each wood species had a different behavior during the MW drying in terms of drying rate, supply, and consumption of energy. In general, with the increase in MW power, the densities of both species decreased and the water uptake increased, as a possible indicator that a certain level of microstructural damage might have occurred. Regarding the mechanical properties of MW-treated maritime pine and eucalyptus wood specimens, under the harshest conditions (MW power of 1200 W), MOR and MOE were reduced compared with the wood sample without MW treatment. [ABSTRACT FROM AUTHOR]

Hardwood vessel elements generate problems in industrial uncoated wood-free printing paper operation, causing vessel picking and ink refusal. These problems are mitigated using mechanical refining at the cost of paper quality. Vessel enzymatic passivation, altering its adhesion to the fiber network and reducing its hydrophobicity is a way of improving paper quality. The object of this paper is to study how the enzymatic treatment by xylanase and by an enzymatic cocktail containing cellulases and laccases affect elemental chlorine free bleached Eucalyptus globulus vessel and fiber porosities, bulk, and surface chemical compositions. Thermoporosimetry revealed the vessel structure to be more porous, surface analysis showed its lower O/C ratio and bulk chemistry analysis its higher hemicellulose content. Enzymes had different effects on porosity, bulk and surface composition of fibers and vessels, affecting vessel adhesion and hydrophobicity. Vessel picking count decreased 76% for papers containing vessels treated with xylanase and 94% for the papers with vessels treated with the enzymatic cocktail. Fiber sheet samples had lower water contact angle (54.1º) than vessels rich sheets (63.7º), that reduced with xylanase (62.1º) and cocktail (58.4º). It is proposed that differences in vessel and fiber porosity structures affect the enzymatic attacks, eventually causing vessel passivation. [ABSTRACT FROM AUTHOR]

Wood is a material that has been used by humankind for a long time. However, wood researchers and industry have always been concerned about the issues during wood drying and the permeability problems of certain species. In this sense, microwave technology has been applied for wood drying and improving permeability. This paper investigates the microwave drying of two Portuguese wood species, Pinus pinaster sap and heartwood, and Eucalyptus globulus heartwood using small clear specimens. The samples were grouped into six during each microwave treatment run according to their similarity of initial moisture content. Once the drying was completed, control and microwave-treated samples were impregnated with desalinated water to analyze their improvement in water absorption, and the compression strength parallel to the grain was analyzed. The results showed that each wood species behaves differently under microwave drying and initial moisture content. The impregnation results demonstrated that pine and Eucalyptus microwave-treated heartwood samples improved their capability to absorb water. Finally, only the microwave-treated specimens of Eucalyptus heartwood presented a decrease in the values of compression strength parallel to the grain compared to the control group. Therefore, MW treatment presents possibilities for further applications for the wood industry with supporting results. [ABSTRACT FROM AUTHOR]

Pre-hydrolysis-kraft of Eucalyptus globulus by autohydrolysis (batch) and with dilute acid hydrolysis (flow-through reactor) were explored in this study, to examine the recovery of xylooligosaccharides (XOs) from the pre-hydrolysis treatment. The results of this work support the potential reuse of the hydrolysate to increase the recovery yield of added value compounds. The pH of the dilute acid hydrolysis was maintained at 3.5 with acetic acid, to mimic the conditions of the batch reactor medium (autohydrolysis). An increase of XOs recovered was evident when the pre-treatment was in the flow-through reactor instead of the batch reactor. In the latter, a high concentration of furfural was recovered, showing the influence of time in XO conversion through hydrolysis. The total yield of pulp was higher in the flow-through reactor (36.4%) in comparison with the batch system (34.5%) after kraft pulping, which was expected, given the increasing time that the hydrolysate was present in the reactor; however, the difference was small and could have been the result of precipitated compounds in the latter, so this needs further analysis. [ABSTRACT FROM AUTHOR]

The effect of different acid sulfite pretreatment conditions on released components in the hydrolysates and the pretreated solid residues' response to enzymatic hydrolysis for Eucalyptus globulus chips was investigated. Sodium bisulfite (0–15%), and sulfuric acid (0–5%) were used to pretreat chips at 170 °C and 190 °C, for as long as 30 min. The hydrolysates were analyzed through high-performance liquid chromatography (HPLC) and spectrophotometry. Overall porosity and pores larger than 2.65 nm (size of a typical cellulase) on the solid residues were estimated using glucose and two dextrans with different hydrodynamic radii as probes. The external specific surface area was analyzed by dynamic light scattering. The solid residues underwent enzymatic hydrolysis with an enzymatic cocktail. Very high (84–95%) carbohydrate conversion was achieved for either an extensively delignified biomass or a biomass with very high content of sulfonated residual lignin (23.4%), since internal porosity enables enzymes accessibility. At least 5% sodium bisulfite and 1% sulfuric acid was required to attain a carbohydrate release above 90% in the enzymatic hydrolysis. Results suggest that the presence of sulfonated lignin does not impair the enzymatic hydrolysis rate and extent. The increase of pretreatment temperature had a positive effect mainly on the initial rate of carbohydrates release in the enzymatic hydrolysis. The increase of the wood material dimensions from pins to conventional chips significantly decreased the hemicellulose removal in acid sulfite pretreatment but had a small effect on the enzymatic yield. [ABSTRACT FROM AUTHOR]

This study focused on the use of industrialeucalyptus globulusbark as an alternative fiber source for bleached pulp and paper production. Bark has high extractives and ash contents (7.7% and 3.5%, respectively) but a mild hydrothermal pretreatment was tested, decreasing its values to 2.8% and 2.4%, respectively. Untreated and pretreated bark were kraft pulped at 15% and 20% (as Na2O) active alkali conditions. The pretreatment improved delignification when using low active alkali; kappa number 25.4 vs 17.5, and shives 3.1% vs 0%, respectively, with untreated and pretreated bark. The pretreatment resulted in a lower chemical demand to obtain pulps with similar yield and kappa number. It was possible to produce bleached pulps with good handsheet optical, physical, and mechanical properties with slightly lower values than those of industrial eucalypt wood pulps; e.g., brightness > 85% vs 87%, tear index > 4.2 vs 5.6 mn.m2.g−1, tensile index > 62 vs 69 n.m.g−1for bark and wood pulps, respectively. [ABSTRACT FROM AUTHOR]

Wood chips ofEucalyptus globulusandPinus pinasterandCytisus striatusbranches were subjected to acid sulphite pretreatment with different charges of sodium bisulphite (5–15%) and sulphuric acid (0–5%). Sugars, organic acids, and furans released in the pretreatment and enzymatic hydrolysates were analyzed by HPLC. The carbohydrates released in the pretreatment stage ranged between 2.5% and 18.7% (on wood weight) and are strongly species-dependent. The furans and formic acid represented less than 0.06% and 0.9% on wood weight, respectively, even under harsh reaction conditions. The enzymatic hydrolysis of the solid residues resulted in polysaccharide conversions in the range of 13% to 90%, depending on the pretreatment conditions and wood species. Eucalypt performs much better than the other species in both acid sulphite and enzymatic hydrolysis. The drying process before the enzymatic treatment has a markedly negative effect on the rate and extent of sugar release. [ABSTRACT FROM AUTHOR]

The wood of a mature (40-year-old) Eucalyptus globulus Labill tree was characterized at different stem height levels (0%, 10%, 35%, and 50% of total height) regarding pulping, bleaching, and paper properties. Pulp yields increased upwards from 46% to 50%, and Kappa number decreased from 17.5 to 12.3 at 0 and 50% height, respectively. The estimated specific wood consumption ranged from 3.2 m³ odt-1 to 3.1 m3 odt-1 at 0% and 50% height levels, respectively. Pulp drainage varied along the stem, with less drainability (20.3 °SR) and higher water retention value (1.07 g.g-1) at the base. Pulp fiber length increased (827 µm vs. 877 µm) and width decreased (19 μm vs. 17 μm) from 0% to 50% height levels. Tensile, tear, and internal bond strength decreased upwards, with mean values of 34.9 N.m.g-1, 3.1 mN.m².g-1, and 95.8 J.m-2, respectively. These findings support the use of mature E. globulus trees without loss of pulp production and quality. [ABSTRACT FROM AUTHOR]

Paper properties determine the product application potential and depend on the raw material, pulping conditions, and pulp refining. The aim of this study was to construct mathematical models that predict quantitative relations between the paper density and various mechanical and optical properties of the paper. A dataset of properties of paper handsheets produced with pulps of Acacia dealbata, Acacia melanoxylon, and Eucalyptus globulus beaten at 500, 2500, and 4500 revolutions was used. Unsupervised classification techniques were combined to assess the need to perform separated prediction models for each species, and multivariable regression techniques were used to establish such prediction models. It was possible to develop models with a high goodness of fit using paper density as the independent variable (or predictor) for all variables except tear index and zero-span tensile strength, both dry and wet. [ABSTRACT FROM AUTHOR]

In this study, Eucalyptus globulus stumpwood samples collected from six different sites in Portugal were evaluated for their ease of pulping, using two delignification processes (kraft and alkaline sulfite-anthraquinonemethanol (ASAM)). Morphologically, the stumpwood included fibers with a mean length of 0.930 mm, diameter of 21.4 μm, lumen width of 9.1 μm, and cell-wall thickness of 6.1 μm. The Runkel ratio varied between 1.0 and 1.9, and the slenderness ratio ranged between 50.6 and 35.1. ASAM pulps presented higher yields and kappa numbers (49.3% and 36, respectively) when compared to kraft pulps (42.7% and 14, respectively). Extractive-free material increased pulp yield (51.7% and 47.5% for ASAM and kraft, respectively) and decreased kappa number (18 and 11). The kraft pulps showed a coarseness of 0.096 mg/m, curl of 5.2%, and 16.7% kinked fibers, while for the ASAM pulps, these values were 0.105 mg/m, 5.2%, and 16.3%, respectively. [ABSTRACT FROM AUTHOR]

The article presents an experimental research on the effect of eucalyptus globulus wood density on papermaking potential. It states that understanding the morphological features of eucalyptus globulus in tree selection and genetic improvement programs can help papermakers keep off the negative impact on light scattering coefficient and refining energy usage. Eucalyptus globulus kraft pulp has been used for printing and writing papers because of its strength, bulk, opacity, and smoothness. Different charts reflecting provenance, temperature, climate conditions and density of the wood are shown. It also includes diagrams showing the correlation between paper density and wood basic density, and the results and conclusions obtained from the study.

Abstract: Biobleaching studies using laccase mediator system (LMS) were carried out, under optimized conditions, on two unbleached Eucalyptus globulus kraft pulps, one produced by conventional way, with kappa number of 16.1, and another with kappa number of 14.5, obtained by modified kraft procedure with a high liquor/wood ratio and with black liquor replacement in the middle of the cooking. The pulp properties before and after LMS and alkaline extraction were evaluated in terms of kappa number, hexeneuronic acid content, viscosity, brightness and acid insoluble lignin content. The original milled wood sample and the kraft pulps were characterized by pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) and thermogravimetry/mass spectrometry (TG/MS). Eucalypt wood lignin produces guaiacol and syringol derivatives during pyrolysis. These lignin products can be detected with high sensitivity using the selected ion chromatograms even in the bleached pulp of low lignin content (about 0.5%). Py-GC/MS revealed that the lignin moieties were similarly altered during biobleaching as during pulping, which is exemplified by the preferential removal of aldehyde groups from the alkyl side groups. Semi-quantitative analysis of the pyrograms indicates that the lignin content of the biobleached pulps is reduced by about half in comparison with the unbleached pulps. The TG/MS results show that the hemicellulose content of wood was strongly modified during pulping resulting in higher thermal stability. [Copyright &y& Elsevier]

Abstract: This study centred on the analysis of lignin in situ of cloned eucalypt and pine kraft pulps. Trametes versicolor laccase-violuric acid system (LMS) delignifications were performed on a softwood (Pinus pinaster) and a hardwood (Eucalyptus globulus) conventional kraft pulp with an initial kappa number of 34.5 and 15.5, respectively. The LMS treated pulps were then subjected to alkaline extraction stages (E). The kappa number data show that LMS is effective at biodelignifying both softwood and hardwood kraft pulps. However, under the conditions employed in this study, a greater level of biodelignification was obtained with LMS E. globulus (hardwood) than with LMS P. pinaster (softwood), but the amount of lignin removed was higher for the softwood pulp. The original milled wood samples, kraft pulps, biodelignified kraft pulps, and isolated residual lignin and milled wood lignins from the two wood samples have been characterized by pyrolysis-gas chromatography/mass spectrometry. The analysis of the pyrograms indicates that the lignin compositions of the two wood species and corresponding pulps are very different, as expected; however, the knowledge of the chemical mechanisms of delignification is very limited and requires additional work. Analytical pyrolysis is one the few degradative methods for the analysis of biopolymers that has shown a sufficient degree of success. [Copyright &y& Elsevier]