Search

A class 2 integron was found in an Escherichia coli isolate mediating a urinary tract infection. Unlike other class 2 integrons from pathogens, the encoded IntI2 protein was functional. The integron possessed a dfrA14 cassette, and a second novel cassette in which a lipoprotein signal peptidase gene is predicted.

Mobile gene cassettes collectively carry a highly diverse pool of novel genes, ostensibly for purposes of microbial adaptation. At the sequence level, putative functions can only be assigned to a minority of carried ORFs due to their inherent novelty. Having established these mobilized genes code for folded and functional proteins, the authors have recently adopted the procedures of structural genomics to efficiently sample their structures, thereby scoping their functional range. This chapter outlines protocols used to produce cassette-associated genes as recombinant proteins in Escherichia coli and crystallization procedures based on the dual screen/pH optimization approach of the SECSG (SouthEast Collaboratory for Structural Genomics). Crystal structures solved to date have defined unique members of enzyme fold classes associated with transport and nucleotide metabolism.

We have devised a strategy for screening mutant libraries for enzyme variants with enhanced solubility. The method is based on the observation that Escherichia coli can become insensitive to the antibiotic trimethoprim (TMP) if dihydrofolate reductase (DHFR) is expressed at an appropriate level. DHFR is a very soluble protein and can be expressed at levels that exceed normally lethal concentrations of TMP. In our approach, the gene encoding an insoluble target protein is placed in a vector so that the translated protein will be fused to DHFR. The resulting fusion protein will form inclusion bodies and inactivate DHFR-the cells will be susceptible to TMP. Mutations to the target protein that make it more soluble will also make the fusion protein more soluble so that DHFR will be at least partially active-the cells will be resistant to TMP. As the solubility of the target protein increases, the cells will become more resistant to TMP. The system was tested with a putative acetyltransferase (ACE) from a strain of the marine bacterium Vibrio fischerii. The gene encoding this protein was of interest since it is part of a mobile gene cassette within an integron array of the strain in question. After multiple rounds of shuffling and selection, ACE mutants were produced that had significantly improved solubility.

Objectives: To determine clonality and identify plasmid-mediated resistance genes in 11 multidrug-resistant Escherichia coli (MDREC) isolates associated with opportunistic infections in hospitalized dogs in Australia., Methods: Phenotypic (MIC determinations, modified double-disc diffusion and isoelectric focusing) and genotypic methods (PFGE, plasmid analysis, PCR, sequencing, Southern hybridization, bacterial conjugation and transformation) were used to characterize, investigate the genetic relatedness of, and identify selected plasmid-mediated antimicrobial resistance genes, in the canine MDREC., Results: Canine MDRECs were divided into two clonal groups (CG 1 and 2) with distinct restriction endonuclease digestion and plasmid profiles. All isolates possessed bla(CMY-7) on an approximately 93 kb plasmid. In CG 1 isolates, bla(TEM), catA1 and class 1 integron-associated dfrA17-aadA5 genes were located on an approximately 170 kb plasmid. In CG 2 isolates, a second approximately 93 kb plasmid contained bla(TEM) and unidentified class 1 integron genes, although a single CG 2 strain carried dfrA5. Antimicrobial susceptibility profiling of E. coli K12 transformed with CG 2 large plasmids confirmed that the bla(CMY-7)-carrying plasmid did not carry any other antimicrobial resistance genes, whereas the bla(TEM)/class 1 integron-carrying plasmid carried genes conferring resistance to tetracycline and streptomycin also., Conclusions: This is the first report on the detection of plasmid-mediated bla(CMY-7) in animal isolates in Australia. MDREC isolated from extraintestinal infections in dogs may be an important reservoir of plasmid-mediated resistance genes.

Integrons capture gene cassettes by using a site-specific recombination mechanism. As only one class of integron and integron-determined site-specific recombination system has been studied in detail, the properties of a second class, the only known class 3 integron, were examined. The configuration of the three potentially definitive features of integrons, the intI3 gene, the adjacent attI3 recombination site, and the P(c) promoter that directs transcription of the cassettes, was similar to that found in the corresponding region (5' conserved segment) of class 1 integrons. The integron features are flanked by a copy of the terminal inverted repeat, IRi, from class 1 integrons on one side and a resolvase-encoding tniR gene on the other, suggesting that they are part of a transposable element related to Tn402 but with the integron module in the opposite orientation. The IntI3 integrase was active and able to recognize and recombine both known types of IntI-specific recombination sites, the attI3 site in the integron, and different cassette-associated 59-be (59-base element) sites. Both integration of circularized cassettes into the attI3 site and excision of integrated cassettes were also catalyzed by IntI3. The attI3 site was localized to a short region adjacent to the intI3 gene. Recombination between a 59-be and secondary sites was also catalyzed by IntI3, but at frequencies significantly lower than observed with IntI1, the class 1 integron integrase.

The class 1 integron integrase, IntI1, recognizes two distinct types of recombination sites, attI sites, found in integrons, and members of the 59-be family, found in gene cassettes. The efficiencies of the integrative version of the three possible reactions, i.e., between two 59-be, between attI1 and a 59-be, or between two attI1 sites, were compared. Recombination events involving two attI1 sites were significantly less efficient than the reactions in which a 59-be participated, and the attI1 x 59-be reaction was generally preferred over the 59-be x 59-be reaction. Recombination of attI1 with secondary sites was less efficient than the 59-be x secondary site reaction.

Spontaneous multidrug-resistant (Mdr) mutants of Klebsiella pneumoniae strain ECL8 arose at a frequency of 2.2 x 10(-8) and showed increased resistance to a range of unrelated antibiotics, including chloramphenicol, tetracycline, nalidixic acid, ampicillin, norfloxacin, trimethoprim and puromycin. A chromosomal fragment from one such mutant was cloned, and found to confer an Mdr phenotype on Escherichia coli K12 cells that was essentially identical to that of the K. pneumoniae mutant. Almost complete loss of the OmpF porin in the E. coli transformant, and of the corresponding porin in the K. pneumoniae mutant, was observed. The presence of the Mdr mutation in K. pneumoniae or the cloned K. pneumoniae ramA (resistance antibiotic multiple) locus in E. coli also resulted in active efflux of tetracycline, and increased active efflux of chloramphenicol. After transformation of a ramA plasmid into E. coli, expression of chloramphenicol resistance occurred later than expression of resistance to tetracycline, puromycin, trimethoprim and nalidixic acid. The ramA gene was localized and sequenced. It encodes a putative positive transcriptional activator that is weakly related to the E. coli MarA and SoxS proteins. A ramA gene was also found to be present in an Enterobacter cloacae fragment that has previously been shown to confer an Mdr phenotype, and it appears that ramA, rather than the romA gene identified in that study, is responsible for multidrug resistance. The ramA gene from the wild-type K. pneumoniae was identical to that of the mutant strain and also conferred an Mdr phenotype on E. coli, indicating that the mutation responsible for Mdr in K. pneumoniae had not been cloned.

The positions of the outer boundaries of the 5'- and 3'-conserved segment sequences of integrons found at several different locations have been determined. The position of the 5' end of the 5'-conserved segment is the same for six independently located integrons, In1 (R46), In2 (Tn21), In3 (R388), In4 (Tn1696), In5 (pSCH884), and In0 (pVS1). However, the extent of the 3'-conserved segment differs in each integron. The sequences of In2 and In0 diverge first from the conserved sequence, and their divergence point corresponds to the 3'-conserved segment endpoint defined previously (H.W. Stokes and R.M. Hall, Mol. Microbiol. 3:1669-1683, 1989), which now represents the endpoint of a 359-base deletion in In0 and In2. The sequence identity in In3, In1, In4, and In5 extends beyond this point, but each sequence diverges from the conserved sequence at a different point within a short region. Insertions of IS6100 were identified adjacent to the end of the conserved region in In1 and 123 bases beyond the divergence point of In4. These 123 bases are identical to the sequence found at the mer end of the 11.2-kb insertion in Tn21 but are inverted. In5 and In0 are bounded by the same 25-base inverted repeat that bounds the 11.2-kb insert in Tn21, and this insert now corresponds to In2. However, while In0, In2, and In5 have features characteristic of transposable elements, differences in the structures of these three integrons and the absence of evidence of mobility currently preclude the identification of all of the sequences associated with a functional transposon of this type.

Integrons are genetic elements which are capable of acquiring genes by site-specific recombination. The most common integron structure consists of two conserved segments flanking a variable region where many different antibiotic resistance genes have been found. The integrons In6 and In7, present in the plasmids pSa and pDGO100, respectively, are unusual in that they include a duplication of the sulI gene which is located within the integron 3'-conserved segment. To further investigate the structure of these integrons, the DNA sequence of the segment located between the two sulI genes was determined. In In7 this segment is 2822 bases long and includes a trimethoprim resistance gene, dhfrX, at one end. The corresponding region in In6 is 4.5 kb and is nearly identical to the In7 segment over the first 2105 bases. In the region unique to In6, a cat gene, conferring chloramphenicol resistance, has replaced the dhfrX gene of In7. This location thus represents a second variable region where different antibiotic resistance genes are found, but the way in which genes become associated with this second variable region is not known. The overall similarity of the structures of In6 and In7 suggests that the additional DNA segments found in these integrons have a common origin, and a possible mechanism for the origin of integrons with partial 3'-conserved segment duplications is presented.

The sequence of the Tn1696 determinant for inducible nonenzymatic chloramphenicol resistance has been determined. The cml region, the fourth insert of the Tn1696 integron, is 1547 bases and includes a 59-base element at the 3' end, as is typical of integron inserts. One gene, designated cmlA and predicting a polypeptide of 44.2 kDa, is encoded in the insert. However, the cmlA region shows one feature not previously found in an integron insert. A promoter is located within the cmlA insert, and translational attenuation signals related to those of the inducible cat and ermC genes found in gram-positive organisms are also present. The regulatory region includes a leader peptide of nine amino acids, a ribosome stall sequence related to those preceding cat genes, and two alternative pairs of stem-loop structures which either sequester or disclose the ribosome binding site and start codon preceding the cmlA gene.

The ebgA (evolved beta-galactosidase) gene of Escherichia coli was isolated as part of a 9.6-kilobase (kb) sequence cloned into plasmid pBR322. The position of the ebgA gene within that 9.6-kilobase sequence was identified by insertional inactivation by means of the transposon gamma-delta. In addition to the gamma-delta insertions that inactivate ebgA by disrupting the coding sequence, seven additional gamma-delta insertions reduce expression of the gene by a factor of greater than 200 by insertions elsewhere into the replicon. One of these insertions is into the pBR322 sequence itself. This action at a distance to reduce expression requires that gamma-delta is cis with respect to the ebgA gene. The effect is independent of the orientation or position of gamma-delta within the replicon, but it does depend both upon the orientation of the ebgA-bearing sequence within the replicon and upon the total size of the replicon. Transcription readthrough (promoter occlusion) does not explain this phenomenon, and we suggest that the presence of gamma-delta may alter the local supercoiling in the region of the ebgA promoter in such a way as to inhibit transcription. This repression by a transposable element appears to represent a novel mechanism for altering gene expression.

We have sequenced the ebgA (evolved beta-galactosidase) gene of Escherichia coli K12. The sequence shows 50% nucleotide identity with the E. coli lacZ gene, demonstrating that the two genes are related by descent from a common ancestral gene. Comparison of the two sequences suggests that the ebgA gene has recently been under selection. A significant excess of identical, rather than synonymous, codons used to encode identical amino acids at the same positions in the aligned sequences implies that some form of selection is operating directly at the DNA level. This selection is independent of, and in addition to, selection based on codon usage or on function of the gene products.

The sequence of ebgR, the gene that encodes the EBG repressor, was determined. There is 44% DNA sequence identity between ebgR and lacI, the gene that encodes the LAC repressor. There is also 25% identity between the amino acid sequence of lacI and the deduced amino acid sequence of ebgR. The sequence of 596 bp distal to ebgA, the structural gene for EBG beta-galactosidase, was also determined. Within that region there were two sequences, 74 and 100 bp long, that showed 46% and 50% identity, respectively, to sequences in the first 600 bp of lacY, the structural gene for the lactose permease. The organization and direction of transcription of the repressor and structural genes of the two operons are identical. Taken together with the homology between ebgA and lacZ (as demonstrated in the companion article in this issue), this provides strong evidence that the EBG and LAC operons are descended from a common ancestor. The map position of these two operons supports the notion that these operons diverged following a genome duplication event in an ancestor of Escherichia coli.

A family of novel mobile DNA elements is described, examples of which are found at several independent locations and encode a variety of antibiotic resistance genes. The complete elements consist of two conserved segments separated by a segment of variable length and sequence which includes inserted antibiotic resistance genes. The conserved segment located 3' to the inserted resistance genes was sequenced from Tn21 and R46, and the sequences are identical over a region of 2026 bases, which includes the sulphonamide resistance gene sull, and two further open reading frames of unknown function. The complete sequences of both the 3' and 5' conserved regions of the DNA element have been determined. A 59-base sequence element, found at the junctions of inserted DNA sequences and the conserved 3' segment, is also present at this location in the R46 sequence. A copy of one half of this 59-base element is found at the end of the sull gene, suggesting that sull, though part of the conserved region, was also originally inserted into an ancestral element by site-specific integration. Inverted or direct terminal repeats or short target site duplications, both of which are characteristics of class I and class II transposons, are not found at the outer boundaries of the elements described here. Furthermore, the conserved regions do not encode any proteins related to known transposition proteins, except the DNA integrase encoded by the 5' conserved region which is implicated in the gene insertion process. Mobilization of this element has not been observed experimentally; mobility is implied from the identification of the element in at least four independent locations, in Tn21, R46 (IncN), R388 (IncW) and Tn1696. The definitive features of these novel elements are (i) that they include site-specific integration functions (the integrase and the insertion site); (ii) that they are able to acquire various gene units and act as an expression cassette by supplying the promoter for the inserted genes. As a consequence of acquiring different inserted genes, the element exists in a variety of forms which differ in the number and nature of the inserted genes. This family of elements appears formally distinct from other known mobile DNA elements and we propose the name DNA integration elements, or integrons.