Search

This paper proposes a new type of substrate for manufacturing LEDs based on AlInGaN heterostructures. Instead of depositing SiC layers on the surface of Si using the conventional method, a new method involving the coordinated substitution of atoms (MCSA) to form the SiC layer is proposed. This new approach enables the growth of epitaxial GaN layers with low defect content and facilitates transfer to any surface. The paper details the technology of manufacturing LEDs on SiC/Si substrates obtained by the MCSA and elaborates on the benefits of using these substrates in LED production. Additionally, the advantages of the growth interface between SiC and Si materials are discussed. Moreover, it is found that thinner SiC layers (<200 nm) contribute to the scattering of the LED's own radiation in the heterostructure waveguide, which decreases its absorption by silicon. For flip-chip LEDs with the substrate removed, substrates with thicker SiC layers (~400 nm) and a growth porous layer of several microns at the SiC-Si interface is utilized to simplify Si substrate removal and enhance the manufacturing process's cost-effectiveness. [ABSTRACT FROM AUTHOR]

We have studied broad-area vertical-cavity surface-emitting lasers grown in the antiwaveguiding approach (AVCSELs). The AVCSEL-type devices were fabricated in the ridge stripe geometry with openings in the top contact layer. Surface lasing was realized and evaluated for the devices with and without the integrated absorber section, acting as a selective filter for the emission modes propagating at finite tilt angle with respect to the normal to the surface (F-AVCSEL). It was found that the conventional AVCSEL device lases in high-order excited modes, tilted with respect to the normal to the surface, while lower order modes evolve at higher current densities causing a dramatic broadening of the emission spectrum. On the contrary, the F-AVCSEL emission is composed of a single spectral feature, which remains hardly affected up to the highest current densities >10 kA/cm². The far-field pattern is composed of a single zero-angle lobe with a beam divergence defined by the size of the opening in the top contact. No spectral features due to parasitic high-order modes were observed. The Gaussian-type single-wavelength surface-emitting lasing with an output power of 70 mW was realized in all-epitaxial wavelength-selective filter concept. [ABSTRACT FROM AUTHOR]