Search

Species sensitivity distributions (SSDs) play an important role in ecological risk assessment. Estimating SSDs requires toxicity data for many species, but reports on saltwater species are often limited compared to freshwater species. This limitation can constrain informed management of saltwater quality for the protection of marine ecosystems. We investigated the relationships between the parameters (i.e., mean and standard deviation [SD]) of freshwater and saltwater log‐normal SSDs to determine how accurately saltwater toxicity could be estimated from freshwater toxicity test data. We estimated freshwater and saltwater SSDs for 104 chemicals with reported acute toxicity data for five or more species and compared their means, SDs, and hazardous concentrations for 5% of the species (HC5) derived from the acute SSDs. Standard major axis regression analyses generally showed that log–log relationships between freshwater and saltwater SSD means, SDs, and HC5 values were nearly 1:1. In addition, the ratios of freshwater‐to‐saltwater SSD means and HC5 values for most of the 104 chemicals fell within the range 0.1–10. Although such a strong correlation was not observed for SSD SDs (r2 < 0.5), differences between freshwater and saltwater SSD SDs were relatively small. These results indicate that saltwater acute SSDs can be reasonably estimated using freshwater acute SSDs. Because the differences of the means and SDs between freshwater and saltwater SSDs were larger when the number of test species used for SSD estimation was lower (i.e., five to seven species in the present study), obtaining toxicity data for an adequate number of species will be key to better approximation of a saltwater acute SSD from a freshwater acute SSD for a given chemical. Environ Toxicol Chem 2022;41:2021–2027. © 2022 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC. [ABSTRACT FROM AUTHOR]

Although the concept and modeling of metal bioavailability and toxicity have been well developed based largely on laboratory experiments with standard test species, additional evidence is required to demonstrate their applicability for macroinvertebrates typically found in natural lotic ecosystems. We conducted 10‐day stream mesocosm experiments to test the hypothesis that increased water hardness (in the present study, the calcium [Ca] concentration was increased by adding CaCl2) would mitigate the effects of copper (Cu) on natural benthic macroinvertebrate communities. Exposure of macroinvertebrate communities to 25 μg/L Cu for 10 days in stream mesocosm experiments resulted in significant decreases in total abundance, in number of taxa, and in abundance of many macroinvertebrate taxa. However, the addition of Ca to stream mesocosms and the associated increase in water hardness up to 250 mg/L CaCO3 did not mitigate these effects of Cu on macroinvertebrate communities. The results showed that the hardness‐based water quality criteria for Cu of the US Environmental Protection Agency were not protective under the conditions of relatively high hardness, low alkalinity, and circumneutral pH. In contrast, the water quality criteria based on the biotic ligand model predicted little protective effects of Ca on Cu toxicity, which is consistent with our results. Additional experiments are required to understand the influence of modifying factors on the toxicity of metals to macroinvertebrate communities. Environ Toxicol Chem 2022;41:1304–1310. © 2022 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC. [ABSTRACT FROM AUTHOR]

Environmental contamination with nano‐ and microplastic (NMP) particles is an emerging global concern. The derivation of species sensitivity distributions (SSDs) is an essential step in estimating a hazardous concentration for 5% of the species (HC5), and this HC5 value is often used as a "safe" concentration in ecological risk assessment, that is, predicted‐no‐effect concentration. Although properties of plastics such as particle size can affect toxic effect concentrations, such influences have not yet been quantitatively considered in estimating SSDs for NMP particles. We illustrate a log‐normal SSD using chronic lowest‐observed‐effect concentrations (LOECs) of NMP particles from readily available toxicity data sets, considering the influence of particle size, polymer type, and freshwater or marine test media by adopting Bayesian hierarchical modeling techniques. Results of the hierarchical SSD modeling suggest that the SSD mean was negatively associated with particle size and was lower in marine media than in freshwater media. The posterior medians of the HC5 estimated from the LOEC‐based SSD varied by a factor of 10 depending on these factors (e.g., 1.8–20 μg/L for the particle size range of 0.1–5000 μm in the marine environment). Hierarchical SSD modeling allows us to clarify the influences of important factors such as NMP properties on effect concentrations, thereby helping to guide more relevant ecological risk assessments for NMP. Environ Toxicol Chem 2022;41:954–960. © 2022 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC. [ABSTRACT FROM AUTHOR]

Equilibrium partitioning (EqP) theory and spiked‐sediment toxicity tests are useful methods to develop sediment quality benchmarks. However, neither approach has been directly compared based on species sensitivity distributions (SSDs) to date. In the present study, we compared SSDs for 10 nonionic hydrophobic chemicals (e.g., pyrethroid insecticides, other insecticides, and polycyclic aromatic hydrocarbons) based on 10–14‐day spiked‐sediment toxicity test data with those based on EqP theory using acute water‐only tests. Because the exposure periods were different between the two tests, effective concentrations (i.e., median effective/lethal concentration) were corrected to compare SSDs. Accordingly, we found that hazardous concentrations for 50% and 5% of species (HC50 and HC5, respectively) differed by up to a factor of 100 and 129 between the two approaches, respectively. However, when five or more species were used for SSD estimation, their differences were reduced to a factor of 1.7 and 5.1 for HC50 and HC5, respectively, and the 95% confidence intervals of HC50 values overlapped considerably between the two approaches. These results suggest that when the number of test species is adequate, SSDs based on EqP theory and spiked‐sediment tests are comparable in sediment risk assessments. Environ Toxicol Chem 2022;41:462–473. © 2021 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC. [ABSTRACT FROM AUTHOR]

Strategies for deriving predicted environmental concentrations (PECs) using environmental exposure models have become increasingly important in the environmental risk assessment of chemical substances. However, many strategies are not fully developed owing to uncertainties in the derivation of PECs across spatially extensive areas. Here, we used 3‐year environmental monitoring data (river: 11 702 points; lake: 1867 points; sea: 12 points) on linear alkylbenzene sulfonate (LAS) in Japan to evaluate the ability of the National Institute of Advanced Industrial Science and Technology (AIST)‐Standardized Hydrology‐Based Assessment Tool for the Chemical Exposure Load (SHANEL) model developed to predict chemical concentrations in major Japanese rivers. The results indicate that the estimation ability of the AIST‐SHANEL model conforms more closely to the actual measured values in rivers than it does for lakes and seas (correlation coefficient: 0.46; proportion within the 10× factor range: 82%). In addition, the 95th percentile, 90th percentile, 50th percentile, and mean values of the distributions of the measured values (14 µg/L, 8.2 µg/L, 0.88 µg/L, and 3.4 µg/L, respectively) and estimated values (19 µg/L, 13 µg/L, 1.4 µg/L, and 4.2 µg/L, respectively) showed high concordance. The results suggest that AIST‐SHANEL may be useful in estimating summary statistics (e.g., 95th and 90th percentiles) of chemical concentrations in major rivers throughout Japan. Given its practical use and high accuracy, these environmental risk assessments are suitable for a wide range of regions and can be conducted using representative estimated values, such as the 95th percentile. Integr Environ Assess Manag 2019;15:750–759. © 2019 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals, Inc. on behalf of Society of Environmental Toxicology & Chemistry (SETAC). Key Points: The performance of an environmental exposure model, AIST–SHANEL, for estimating chemical concentration in rivers was evaluated using comprehensive measurement data from major rivers throughout Japan.The estimated spatiotemporal LAS concentrations, especially the 95th and 90th percentiles, were in good agreement with the measured concentrations.Using representative estimated values, e.g., 95th percentile, AIST–SHANEL can precisely estimate chemical concentrations in major rivers throughout Japan, and can contribute to high–accuracy environmental risk assessments. [ABSTRACT FROM AUTHOR]

In our respective careers in the field of environmental toxicology, we have read many peer-reviewed papers. We believe that there are 4 stakeholder groups responsible for improving the clarity and readability of published papers: educators, authors, editors, and reviewers. Although we agree with De Vries et al. (2009) that reviewers are responsible for "critical, thorough, thoughtful, constructive and timely" review, we do not agree with an author's neglect in fine-tuning her or his writing, with the attitude that "the reviewers would fix it.". [Extracted from the article]

We examined the influence of heavy metal pollution from an abandoned mine on benthic macroinvertebrates, at population and community levels, and the potential amount of food available for drift-feeding fish in northern Japanese streams. We studied multiple polluted and unpolluted sites with similar longitudinal positions to avoid problems caused by upstream-downstream comparisons. The ranges of zinc, copper, cadmium, and lead concentrations among the study sites were 5 to 812 μg/L, less than 0.12 to 5.2 μg/L, less than 0.0026 to 4.9 μg/L, and 0.1 to 18.6 μg/L, respectively. The abundance of several populations and community metrics showed a significant negative response to heavy metal pollution. Mayfly diversity and abundance was relatively sensitive to heavy metal pollution. In addition, the biomass of groups of macroinvertebrate taxa that are highly available for salmonids were significantly reduced at metal-polluted sites; this decrease in the most highly available group was noticeable (99% at the heavily polluted upper sites and 69% at the moderately polluted lower sites in spring). These results suggest that we should consider the indirect effect of pollution on food availability for the conservation of fish populations that depend on drifting macroinvertebrates. [ABSTRACT FROM AUTHOR]