Search

The high temperature reservoir is in the high water cut stage after long-term development, and the inefficiency or invalid circulation caused by injected water is aggravated. With a long development history, the well pattern has been adjusted many times, and the remaining oil distribution is highly dispersed. Based on the high-temperature reservoir conditions of the target block, the influence analysis of different key parameters on EOR effect of LB- block was carried out. The gas flooding and chemical flooding potential were evaluated by numerical simulation method, and the EOR effect of different oil flooding systems was defined. The gas flooding and binary flooding numerical models were established according to the well pattern, reservoir and fluid physical parameters. The development effect is predicted under different formation dip, reservoir permeability, oil viscosity, oil saturation, effective thickness and reservoir temperature. The simulation results show that the key factors of EOR in gas flooding and binary flooding are formation dip.

Jidong oilfield belongs to complex fault block reservoir, and the development has now entered into high water-cut stage. when using Well pattern encryption technology to stabilize production, it is necessary to study the feasibility of Well pattern encryption to ensure a better economic benefit. In this paper, we use theoretical analysis method, consider the influence of oil price on the calculation, improve the economic limit Well pattern density calculation formula, calculate the economic limit Well pattern density under different recovery rates, make recovery rate prediction for different Well pattern density scenarios by combining with Sherkachov's formula, and use the curve intersection method to determine the Well pattern density at the break-even point, so as to determine the economic feasibility of Well pattern encryption. The example calculations show that the use of well network encryption alone does not meet the development requirements of the Liu 90 South block and has no significant economic benefits, so a combination of two-three methods is needed to further improve the recovery rate. Numerical simulation prediction results show that the two-three combination method can improve the recovery rate by 14.54%, accumulate 28.88×104t of oil increase and increase revenue by 678,245,000 yuan.

Surfactant flooding is a common technique in tertiary oil recovery. However, due to the high temperature of some reservoirs and the strong heterogeneity caused by their own geological conditions, the use of common surfactants in high-temperature reservoirs is limited. Temperature - resistant surfactants can reduce interfacial tension, improve conformance and increase oil washing efficiency In this paper, a temperature-resistant nano-type surface active JCN-001 was developed in the laboratory. By testing its particle size distribution, the experimental results can determine that the average particle size range of the system is 34.29nm, so that it can play a better role in low permeability reservoir recovery. Due to its unique nano properties, JCN at 0.2% concentration can still maintain a good effect at about 110, and the oil/water interfacial tension can reach 10-4nm/m, and can also reach ultra-low interfacial tension at high temperature, and the higher the temperature, the more significant the effect According to the changes of surface tension and oil-water interfacial tension, the critical micelle concentration was determined to be about 0.2%. The static adsorption experiments and dynamic adsorption experiments were carried out. The results show that the temperature resistant nano-surfactants have strong adsorption resistance and can effectively reduce the consumption of surfactants on rocks.