Search

In this study, the compression behaviour of unsaturated damaged COx claystone is investigated by performing high pressure oedometer tests with controlled suction. The damaged oedometer samples were prepared by shearing the claystone in triaxial conditions. Four high pressure oedometer tests were conducted using different controlled suctions. The effects of suction and damage on the swelling and compression were investigated in oedometer. Results show that the intact claystone exhibits a larger swelling strain than that of the damaged one at the same imposed suction. The damaged claystone at a lower suction displays a smaller yield stress and higher compressibility, and exhibits a larger compression index Cc than the intact one, evidencing the effect of damage. In addition, the step compression index Cc* increases with the increase of vertical stress, while deceases with the decrease of suction. This indicates the dependencies of compression behaviour on vertical stress and suction.

Some (saturated) claystones, considered as host rocks for deep radioactive waste disposal, are sensitive to drying and wetting. Wetting may result in swelling and damage during the resaturation of specimens for mechanical testing. Given that, due to evaporation, specimens may have lost some pore water during coring, transport, storage and trimming prior to lab testing, it is required to re-saturate them by reinjecting the evaporated water content, compressing the pore space under constant water content, or by using a combination of both. It is important to characterize the hydromechanical processes involving suction changes under total stress loading in order to adapt preparation methods and minimize sample disturbances. We present a novel experimental setup to test claystone specimens under isotropic compression at constant water content, while measuring suction, and we discuss the data of three specimens testedat different initial suctions and degrees of saturation. Interestingly, the path followed in the (decreased) suction vs (increased) total confining stress diagram was observed to be close to the Gens-Alonso “Neutral Line” (a line inclined of 45° in a suction/mean total stress diagram, illustrating similar effects of changes of both variables). In other words, even in close to saturated conditions, changes in confining stress resulted in comparable changes in suction. The data obtained indicate that applying a total stress of 12.2 MPa during resaturation keeps the material on the compressive side of the Neutral Line, limiting swelling-induced sample disturbance.

Blocks of compacted bentonite/sand mixture, with a 40/60 proportion in dry mass, are being studied as an elementary component in the construction of seals in the French concept for high-levelradioactive waste disposal. In the disposal, the seal will be subjected to water infiltration from the host rock. Water retention behaviour in the mixture is governed by bentonite. Nevertheless, the impact of the sand fraction, especially at high concentrations, is still unclear. The water retention curve is found experimentally for the wetting path by using vapour equilibrium technique. Moreover, NMR relaxometry tests executed atfull saturation state are presented. As a result of the comparison with experimental data reported in the past, for different mixtures -ranging from pure bentonite to 20/80 bentonite/sand mixtures-, it is concluded that all porosity in the mixture can be correctly attributed to bentonite. This conclusion simplifies mixtures to equivalent pure bentonite specimens with a dry density equal to the bentonite dry density (𝜌𝑑,𝑏) of the mixture. Moreover, an original method to compare NMR relaxation times for different bentonite/sand -or pure bentonite- mixtures is proposed. It provides the longitudinal relaxation time (T1) in saturated mixtures as a function of 𝜌𝑑,𝑏 and the montmorillonite concentration in bentonite.

Compacted MX80 bentonite/Callovo-Oxfordian (COx) claystone mixture has been considered as a possible sealing/backfilling material in the French deep geological radioactive waste disposal. The swelling pressure of such mixture is an important factor in the design and long-term safety assessment of deep geological repositories. In this study, constant-volume swelling pressure tests were performed on the mixtures with different claystone fractions and dry densities. The test results show that the swelling pressure of the mixtures decreased with the increasing claystone fraction and decreasing dry density. According to the experimental results, the contribution of claystone to the global swelling pressure was further investigated. It was found that the deformation of claystone and its contribution to swelling pressure was highly dependent on the claystone fraction. As the claystone fraction was larger than 30%, the claystone in the mixture swelled, contributing to the global swelling pressure; On the contrary, as the claystone fraction was less than 30%, the swelling of claystone was inhibited by the bentonite and it worked an inert material without any contribution to the swelling pressure.

In most of the concept designs for nuclear waste disposals, bentonite-based materials are used to seal underground galleries and shafts. In order to assess the safety of such engineered barriers and to provide a good prediction for the material behaviour, a number of experimental campaigns and constitutive models have been developed mainly focusing on bentonite compacted blocks. On the other hand, in recent years, the use of high density bentonite pellets combined with powdered bentonite has also been considered as an interesting alternative. The bentonite pellets mixtures present a prominent initial heterogeneity level as a result of the inter-pellets porosity, which evolves strongly during hydration. This paper aims to present the numerical modelling strategy adopted for a swelling pressure test on pellets mixture carried by CEA (France). Taking advantage of the finite element code LAGAMINE, the Barcelona Basic model is considered for the bentonite mechanical behaviour and the double porosity model proposed by [1] is used for the water retention behaviour and permeability evolution. Given the already-known complexity of the multiphysical and multiscale coupled processes taking place during bentonite-hydration, the obtained numerical results are in good agreement with experimental measurements. Especially, the non-monotonic evolution of the swelling pressure during the hydration phase is well captured by this model, which is always a challenge for this type of problem.

This laboratory experimental program investigated the impact of variations in the expansive mineral content, the grain size distribution of employed bentonite, the initial dry density and the selected hydration path on the water retention characteristics and swelling properties of processed Callovo-Oxfordian claystone and its mixtures with MX80 bentonite. The French reference concept for the disposal of nuclear waste in deep sedimentary rock formations envisages the reemployment of excavated material as backfill material, which is installed in situ by means of conventional compaction techniques. The investigations were of special interest as the major issues involving in situ compacted backfill materials were portrayed. Experiments showed that the impact of variations in the dry density on the water retention characteristics of all materials vanished as suctions exceeded 100 MPa. The negligible impact of variations in the initial dry density on the collapse behavior of claystone/ bentonite mixtures remained questionable.

Bentonite pellet-powder mixtures are candidate sealing materials in radioactive waste disposal concepts. The mixture is installed in galleries in dry state as a granular material. The material is progressively hydrated by the pore water of the host rock and becomes homogeneous. Before homogenisation, the granular structure controls the material behaviour. In the present work, a modelling approach able to address particular features of pellet-powder mixtures is introduced. Two domains are considered: i) granular, and ii) homogeneous. The material behaviour before homogenisation is studied through Discrete Element Method (DEM) simulations. Constitutive laws for the granular state are proposed from DEM results. The behaviour of the homogenised material is described by a modified Barcelona Basic Model (BBM). Transition from granular to homogeneous states depends on suction and relative volume fractions of pellets and powder. Swelling pressure tests performed in the laboratory are satisfactorily simulated using this approach.

In the context of underground exploitation, the behaviour of rocks near galleries and tunnels conditions their stability. Underground drilling generates deformations, damage, fracturing, and significant modification of flow characteristics in the surrounding rock. However, the influence of small-scale characteristics and behaviour on the rock deformations and damage at engineering scale remains a complex issue. Consequently, the multiscale behaviour of a clay rock is modelled starting from the large scale of the excavation damaged zone around galleries and then enriching the approach by considering microstructural characteristics from the scale of mineral inclusions. Lastly, a double-scale numerical framework is considered. It allows to relate small- to large-scale rock behaviour in terms of deformations and material rupture. In fact, the development of damage and cracking at microscale allows to predict large-scale fracturing. The developed method focuses on a claystone in the particular context of long-term management of high-level nuclear wastes by deep geological repository. The results highlight the possibilities of double-scale computing in the prediction of the behaviour of underground engineering structures.

The French national radioactive waste management agency (Andra) research program is dedicated to preparing the construction and operation of a deep geological disposal facility for high-level and intermediate-level long-lived radioactive waste (HL, IL-LLW) in the Callovo-Oxfordian claystone (COx). The characterization of the COx thermo-hydro-mechanical (THM) behavior, at different scales of interest, must gradually give relevant data for design and safety calculations. The effects of saturation and desaturation of COx claystone are studied in laboratory conditions (sample scale) and in situ (drift scale), in order to improve knowledge on ventilation effect at gallery wall as galleries will remains open during operational phase (more than 100 years for some specific galleries) in the repository. The Saturation Damaged Zone (SDZ) experiment is outlined and its results are discussed. This experimentation aims to change the relative humidity in an isolated portion of a gallery in order to follow the HM behavior of the surrounding rock mass. Drying and wetting cycles could induce in certain cases cracks and swelling and modify the hydromechanical behavior of the claystone around the gallery (Young modulus, strength, creep…). The long term behavior of the COx claystone at the vicinity of gallery is then studied by performing climatic, hydraulic, geological and geomechanical measurements. Results of the in situ experiment are discussed with respect to the identified process on samples. The discussion given on this paper intends to highlights the inputs from 7 years of an in situ experiment to better understand the unsaturated behavior of the COx claystone.

Wastes resulting from the nuclear electricity production have to be isolated from the biosphere for a very long period of time. For this purpose, deep underground repository in weak permeable geological layers is considered as a reliable solution for the nuclear waste storage. It is however well established that during excavation, the underground drilling process engenders cracks and eventually fractures [1] that deteriorate the hydro-mechanical properties of the surrounding host material in the so-called Excavation Damaged Zone (EDZ). The EDZ behaviour is a major issue because it may constitute a preferential flow path for radionuclide migration. Consequently, the characterisation of the material transport properties and of the transfer kinetics that occur around galleries still need to be investigated. The EDZ properties may be also affected by host rock-gallery air interactions. Ventilation induced drying may also provoke additional cracking, which potentially alters the transport properties of the damaged zone. Large-scale air ventilation experiments are performed in Underground Research Laboratories (URL) that have been constructed to check the feasibility of the repository. A numerical modelling of the SDZ air ventilation test (Andra URL) performed in a low permeability rock is proposed in order to both predict the development of the EDZ during excavation and study the air interaction with the host formation during maintenance phases.

Bentonite-based materials are studied as potential barriers for the geological disposal of radioactive waste. In this context, the hydro-mechanical behaviour of the engineered barrier is first characterized by free swelling conditions followed by constant volume conditions. This paper presents an experimental study conducted in order to characterize the water retention behaviour of a compacted MX-80 bentonite/sand mixture. Then, based on observations of the material double structure and the water retention mechanisms in compacted bentonites, a new water retention model is proposed. The model considers adsorbed water in the microstructure and capillary water in the aggregate-porosity. The model is calibrated and validated against the experimental data. It is used for better understanding competing effects between volume change and water uptake observed during hydration under free swelling conditions.

Stress release effects in a specimen of claystone extracted at great depth (465 m) in the layer of the Callovo-Oxfordian claystone in Eastern France is examined by mimicking the stress change during extraction in the oedometer. To do so, a specimen first submitted to hydration with swelling impeded is afterwards unloaded at constant water content. Comparable mercury intrusion pore size distribution curves are obtained before and after stress release, showing little change in the configuration of inter-platelets pores within the clay matrix of the claystone. The swelling observed at constant water content is then related, to a water transfer from inter-platelets pores to intra-platelets pores, resulting in crystalline swelling within the smectite fraction of the inter-layer illite-smectite minerals.

The effect of changes in suction on the microstructure of the Callovo-Oxfordian claystone along wetting and drying paths was investigated by using mercury intrusion porosimetry. Based on a simplified brick model, the changes of the average thickness of the platelets that constitute the clay matrix (50%) are interpreted as the consequence of the successive adsorption of ordered layers of water molecules along the smectite surfaces, as demonstrated on pure smectites for a long time. This shows the predominant role played by the smectite phase in the overall response of the Callovo-Oxfordian claystone when submitted to suction changes under no stress.