Search

Flood damage has aggravated recently owing to artificial structures in high flow rare areas such as small rivers, which can lead to secondary damage. In this regard, studies are required to examine the conventional design criteria formulas to secure the stability of structures such as weirs and drop structures. Although studies on the stability of these structures have been conducted through small-scale experiments, few empirical studies have investigated the hydraulic phenomena occurring near actual artificial structures. In this study, we fabricated real-size models of weir and drop structure at the Andong River Experiment Center and investigated the flow patterns around the structures by applying the particle image velocimetry analysis technique with a flow tracker. We also measured the scour length in the waterspout section when the structures are overflowing, and compared it with the values calculated using the formula. Consequently, as the supply flow increases, the result is different from the value calculated using the formula given in the existing design standard, and it is judged to be inappropriate for a small stream area with high flow rate. Thus, it is necessary to consider the design factors such as energy gradient and the flow amount per unit width into weir and drop structure as well as the existing design factors in designing an apron section for a weir and drop structure.

Various river projects are underway in small rivers in Korea that typically have natural flows. However, recent findings have shown that damages could be aggravated by structures such as weirs and drop structures during flood incidents. Experimental studies for securing the stability of flood control for these artificial structures have been insufficient, and designs applying the existing domestic design standards would not be suitable for the steep flow sections such as the actual small rivers, possibly aggravating the damages. The present study involved hydraulic model experiments conducted in a laboratory to investigate the surrounding flow patterns according to the river bed slope at the downstream part of the weir model. Further, the scour characteristics in the apron section during the overflow of the structure were analyzed to determine the appropriateness of the apron length. Thus, as the upstream river bed slope gradually increased, the experimental scour length deviated more from the design criteria formula. The results suggest that both the formula suggested by the National Construction Research Institute and Bligh’s formula presented in the River Design Criteria are not suitable for steep-slope rivers, such as small rivers in Korea, because both formulas were proposed based on the seepage line distance and river bed materials without considering the slope of the river bed. Thus, in designing the apron and bed pitching of weirs and drop structures, the river bed slope, scour characteristics of weir overflow, and existing design factors should be comprehensively considered to devise a design formula appropriate for environment of the small rivers in Korea.

Recently, urban inundation disasters resulting from torrential rain have led to serious problems in many countries worldwide. To mitigate the damage of urban inundation, various structural strategies have been carried out, one of which is the creation of underground storage chambers attached to sewerage systems. In this strategy, part of the storm water within a sewer pipe is diverted over the side weir into the storage chamber. The function of this storage chamber is to manage the storm water runoff at a developed site to prevent flooding, and it is essential for providing a temporary storage area for excess storm water. In this study, the differences in the effects of the storage chamber using an urban inundation model due to several conditions such as the rainfall type, changes in the weir shape, installation locations that have different areal features, and changes in the storage capacity volume are verified. Lastly, a suitable installation site is verified via assessments of the inundation damage costs. The results show that the criteria for the degree of mitigation that can be expected in these conditions.

This study proposes an earthen levee reinforcement method with a new biopolymer-based material to prevent levee scour and breach. It is an eco-friendly method that can efficiently protect the levee slope as it enhances soil strength, even at a very low concentration of biopolymer, and has high resistance to surface runoff in addition to promoting vegetation growth. The function and effectiveness of this method were demonstrated through an overflow-based semi-scale experiment in a previous study. In this study, we examined the effect of biopolymer-mixed soil layer on levee stability against an overflow-induced breach. In these experiments, biopolymer-mixed soils were sprayed on the crest and land-side levee surface. Two full-scale tests were conducted (2.5&ndash, 2.7 m high and 14 m wide on bottom). Case 1 (control case) consisted of bare sand without any treatment, while Case 2 consisted of a 1.0% biopolymer-mixed soil sprayed on the crest and landside slope of the levee and turf put on it. By applying an image analysis technique, we analyzed the breach phenomenon and breach retardation effect of the levee treated with a biopolymer and covered with vegetation. In this experiment, the slope loss rate of Case 2 was retarded 1.5 to 2.3 times over time as compared to Case 1. During the experiment, we observed that soil erosion followed through the narrow water channel formed by the stripped turfs. This means that the grasses did not root firmly enough to protect the surface. In this regard, although the experimental results may seem unsatisfactory, the biopolymer was found to help improve erosion retardation. In 2020, we will conduct more experiments with different compositions and concentrations of the biopolymer regardless of levee vegetation. With this research, we expect to confirm that the new technology of using biopolymer-treated soils is promising for solving the levee overflow breach problem.

Cement and other similar compounds have been used to prevent a levee breach during a flood. However, the demand is increasing for eco-friendly and sustainable alternatives to replace the conventional method for levee stabilization and strengthening. To improve the durability and environmental friendliness of a levee, the Andong River Experiment Center applied a biopolymer, which is a new eco-friendly substance, to fabricate a levee model, and conducted a hydraulic model experiment to evaluate the reliability and stability of the new type of levee. An image analysis was applied to calculate the scale of the breaches of the levee slopes. Based on the experimental results obtained, the characteristics of the breach between an earthen levee and the proposed levee were compared. The stability of the levee body was also evaluated according to the thickness of the new substance. The ultimate aim of this study was to derive the optimal conditions by verifying the performance and effectiveness of the new substance in terms of levee breach factors such as overflow, seepage, or piping in a series of hydraulic experiments. In the future, the field application of these optimal conditions will be verified through a real-scale experiment.

The reasons why levee breaches during floods are largely due to overtopping, seepage, and structurally induced piping. According to an analysis of domestic and overseas reported cases of levee breaches, overtopping was found to be the cause for approximately 40% of all cases of breach. Despite such efforts of previous research to establish disaster prevention plans associated with levee breaches, to enhance our understanding of the processes and reasons, further research regarding the prediction of levee breaches must be undertaken by accumulating test data under several different conditions and further verification of the data using numerical models must also be undertaken. In this study, development of technologies regarding a new environmentally friendly bio-polymer capable of protecting levees from erosion is being undertaken. Breach mechanisms was assessed using an image measurement system that collected data regarding the breach progress of the levee, close-up views of the breaching surface, and the formation of the final breaching cross-sections. Further, levee slopes were covered with a bio-soil mixed with a new substance for the purpose of analyzing the stability and the time delay effect.

Vegetation is one of the key factors in river management where environmental aspects as well as flood protection should be taken into consideration. Because of this, numerous studies have been done including experiments and hydrodynamic modelling. Because most of experimental studies were made in indoor laboratory flumes with artificial trees, there are still limitations in transfer of their result to actual channels. REC (River Experiment Center) of Korea has been operating three real-scale, nature-like outdoor experimental channels. In a straight channel, several 4x2 m actual willow patches were planted and have been grown last three years for studies on flow vegetation interaction. A set of intensive flow measurement was made around the first upstream willow patch using ADVs together with measurement of vegetation properties. The experiments were made under several different depth conditions simulating snow-melt and flash-flood. Distribution of flow around and through the patch was characterized along with vertical profiles. The results of the experiment enhance understanding on interaction of flow and actual vegetation in a natural channel and may also provide information on flow resistance used for hydrodynamic modelling and validation.