Search

Particulate Matter (PM) is a well-known health risk factor and pollutes both outdoor and indoor air. Using PM as an air pollution indicator, the aims were to assess outdoor and indoor air pollution due to combustion and/or non-combustion products used outdoors and to compare the PM levels emitted by different products. PM with an aerodynamic diameter ≤10, 4, 2.5 and 1 µm (PM 10 , PM 4 , PM 2.5 , PM 1 ) was simultaneously measured in two areas, respectively, indoors (with smoking ban) and outdoors (where people commonly smoke) of a university library during the morning and the afternoon of two weekdays. Both combustion and non-combustion products determined a relevant worsening of outdoor air quality, with the highest PM 1 levels achieved when a single traditional cigarette (9920 µg m -3 ), a single e-cigarette (9810 µg m -3 ) and three simultaneous traditional cigarettes (8700 µg m -3 ) were smoked. An increase of indoor PM 1 levels was found during outdoor smoking/vaping sessions, persisting also after the end of sessions. The results highlighted the need for a revision of smoke-free laws, especially for outdoor areas, to include non-combustion products. In addition, it is essential to make society aware of the dangers of smoking outdoors by implementing health promotion interventions.

The study was aimed to evaluate the ability of native lichen Xanthoria (X.) parietina to biomonitor and bioaccumulate some heavy metals (As, Cd, Co, Cr, Ni, Pb), PAHs, PCDDs, PCDFs, PCBs and PBDEs and to evaluate the use of the native X. parietina as a multi-tracer tool for scenarios characterized by different anthropogenic pressures. Samples of native X. parietina were collected in six different sites (two green, two residential and two industrial areas, respectively) and analyzed for the target compounds. The results show that X. parietina was a useful tool for the biomonitoring of air quality in the selected areas, and was able to bioaccumulate all the studied metals and POPs. In particular, the total concentrations dry weight (dw) ranged between 8.1 and 103.4 mg kg -1 for metals, from 113 × 10 3 to 183 × 10 3  ng kg -1 for PAHs, from 868 to 7685 ng kg -1 for PCBs, from 14.3 to 113.8 ng kg -1 for PCDDs/Fs (∑TEq = 0.9-7.1), and from 194 to 554 ng kg -1 for PBDEs. Besides, in general, the levels of analytes recovered in the different samples of lichen show an increasing trend from green to industrial sites, especially for PCBs (mean values equal to 1218, 4253 and 7192 ng kg -1 respectively for green, residential and industrial areas). The statistical approach, based on Pearson's correlation and principal component analysis tests, showed that one of the industrial sites was well-separated from the others, that resulted grouped due to some similarities., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

The aim of this research is to evaluate the ability of transplanted lichen Pseudovernia (P). furfuracea to biomonitor and bioaccumulate in urban indoor environments. The elements As, Cd, Cr, Cu, Hg, Ni and Pb and 12 selected polycyclic aromatic hydrocarbons (PAHs) were used to assess P. furfuracea as a biomonitoring tool for the indoor air quality of school environments. To achieve this purpose, lichen samples were exposed for 2 months in the outdoor and indoor environments of five school settings located in urban and rural areas. The results demonstrated that transplanted lichen P. furfuracea is a suitable biomonitoring tool for metals and PAHs in indoor settings and can discriminate between different levels of air pollution related to urbanisation and indoor conditions, such as those characterised by school environments. A transplanted lichen biomonitoring strategy is cost-effective, "green", educational for attending children and less "invasive" than traditional air sampling methods. The feasibility of indoor monitoring by P. furfuracea is a relevant finding and could be a key tool to improve air quality monitoring programmes in school scenarios and thus focus on health prevention interventions for children, who are one of the most susceptible groups in the population.

The ability of a transplanted lichen, Pseudovernia (P.) furfuracea, to act as a multi-tracer biomonitoring tool for As, Cd, Ni, Pb, 12 PAHs, 17 polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) and 27 polychlorinated biphenyls (PCBs) was evaluated at six areas of varying risk (high, medium, negligible) of pollutant fallout from a municipal waste incinerator in central Italy. Transplanted P. furfuracea proved to be an useful tool to biomonitor PCDDs/Fs and PCBs. Concentrations of As, heavy metals, PAHs, PCDDs/Fs resulted similar for all monitored stations. Small differences in total PCBs (4378 and 4631 pg/g dw vs 3298, 4123, 3676 and 4022 pg/g dw) and dioxin-like PCBs (1235 and 1265 pg/g dw vs 794, 1069, 1106 and 1188 pg/g dw) were observed. Air concentrations of monitored compounds appear to be more related to general air pollution than point emissions from the incinerator.

We monitored heavy metal (As, Cd, Hg, and Pb) concentrations in surface water, sediments, and oligochaetes in four major rivers in Calabria (southern Italy) over the course of 1 year. As, Cd, and Pb showed accumulation factors of 10(3)-10(5) for water to sediment and 1-10 for sediment to oligochaetes. Hg showed a water to sediment accumulation factor of 10-100. Finally, Hg concentrations exceeded the Italian quality standard for freshwater in all of the rivers, and As concentrations in sediments exceeded the respective Canadian standard. However, the application of an ecological risk assessment method indicated low risks for all monitored rivers.

Selected polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) were detected by gas-chromatography coupled to triple quadrupole mass spectrometry (GC-QqQ-MS/MS) in marine sediments collected in central Italy. Total PCDD/Fs concentrations ranged from 11.58 to 193.29 pg/g d.w., with PCDFs as the major contributors in most cases. The congener profiles were characterized by high OCDD (70.7%-91.4%). The PCDD/Fs values are within or close to the Environmental Canada sediment reference values (0.85 pg TEQ/g d.w.). GC-QqQ-MS/MS can be a suitable alternative to standard methods for PCDD/Fs determination in environmental samples. The measured PCDD/Fs amounts could be considered as a basis for future monitoring programs.

Benzene is a widespread air pollutant and a well-known human carcinogen. Evidence is needed regarding benzene intake in the pediatric age group. We investigated the use of urinary (u) trans,trans-muconic acid (t,t-MA), S-phenylmercapturic acid (SPMA), and unmodified benzene (UB) for assessing exposure to low concentrations of environmental benzene and the role of living environment on benzene exposure in childhood. u-t,t-MA, u-SPMA, u-UB and u-cotinine were measured in urine samples of 243 Italian children (5-11 years) recruited in a cross-sectional study. Analytical results were compared with data obtained from questionnaires about participants' main potential exposure factors. u-UB, u-t,t-MA and u-SPMA concentrations were about 1.5-fold higher in children living in urban areas than in those in the rural group. Univariate analyses showed that u-UB was the only biomarker able to discriminate secondhand smoke (SHS) exposure in urban and rural children (medians=411.50 and 210.50 ng/L, respectively); these results were confirmed by the strong correlation between u-UB and u-cotinine in the SHS-exposed group and by multivariate analyses. A regression model on u-SPMA showed that the metabolite is related to residence area (p<0.001), SHS exposure (p=0.048) and gender (p=0.027). u-UB is the best marker of benzene exposure in children in the present study, and it can be used as a good carcinogen-derived biomarker of exposure to passive smoking, especially related to benzene, when urine sample is collected at the end of the day. In addition, it is important to highlight that SHS resulted the most important contributor to benzene exposure, underlining the need for an information campaign against passive smoking exposure., (Copyright 2010 Elsevier Ltd. All rights reserved.)

The ability of transplanted lichen Pseudevernia furfuracea to biomonitor specific airborne pollutants (heavy metals and polycyclic aromatic hydrocarbons—PAHs) was investigated at five stations with different traffic densities in Viterbo, Italy. Exposed lichen showed high levels of all analysed pollutants; greatest values were for Zn (147–252 μg/g dw), Pb (24.9–34.6 μg/g dw), fluoranthene (37–107 ng/g dw), pyrene (23–124 ng/g dw). Comparison between contaminants concentration in lichens before and after exposure showed “accumulation” or “severe accumulation” rates in more than 90% of each substance. Besides, Pseudevernia furfuracea accumulated airborne PAHs in a manner that was proportional to traffic density.

A sampling campaign for the determination of concentrations of nonylphenol isomers (NPs) in freshwaters and sediments of the hydrologic system of the Rieti district (central Italy) was conducted from 2002 to 2003. Eighteen sampling points, selected on the basis of the different human activities in the vicinity, were monitored; six series of water samples (from June 2002 to February 2003) and one of sediment samples (summer 2002) were analyzed by GC/MS. There was a direct relationship between concentrations of NPs and the presence of urban or industrial activities near the sampling point. However, concentrations of NPs in water were in the range of < 0.1-1.4 microg l(-1), and their presence limited to short distances from the sources of contamination. Accumulation factors in sediment samples ranged from 10(2) to 5x10(3).

Background: To control the presence of Legionella in an old hospital water system, an integrated strategy of water disinfection-filtration was implemented in the university hospital Umberto I in Rome. Methods: Due to antiquated buildings, hospital water system design and hospital extension (38 buildings), shock hyperchlorination (sodium hypochlorite, 20–50 ppm of free chlorine at distal points for 1–2 h) followed by continuous hyperchlorination (0.5-1.0 mg/L at distal points) were adopted, and microbiological and chemical monitoring of the water supply was carried out in the university hospital (December 2006-December 2011). Results: Overall, 1308 samples of cold <20°C (44.5%), mixed ≥20°C ≤ 45°C (37.7%) and hot >45°C (17.8%) water were collected, determining residual free chlorine (0.43 ± 0.44 mg/L), pH (7.43 ± 0.29) and trihalomethanes (8.97 ± 18.56 μg/L). Legionella was isolated in 102 (9.8%) out of 1.041 water samples without filters (L. pneumophila sg 1 17.6%, L. pneumophila sg 2–14 28.4%, L. non pneumophila 53.9%), and in none of the 267 samples with filters. Legionella was recovered in 23 buildings out of 38 and 29 samples (28.4%) exceeded 103 cfu/L. When considering the disinfection treatment Legionella was isolated: before shock hyperchlorination (21.1%), 15 days after shock hyperchlorination (7.8%), 30 days after shock hyperchlorination (3.5%), during continuous hyperchlorination (5.5%) and without continuous hyperchlorination (27.3%). Continuous hyperchlorination following the shock treatment achieved >70% reduction of positive samples, whereas no continuous hyperchlorination after shock treatment was more frequently associated to Legionella isolation (OR 6.41; 95% CI 3.10–13.26; p <0.001). Independent risk factors for Legionella isolation were: residual free chlorine <0.5 mg/L (OR 13.0; 95% CI 1.37 – 123.2; p <0.03), water T° ≥20°C ≤ 45°C (OR 12.0; 95% CI 1.28 – 111.48; p <0.03) and no continuous hyperchlorination after shock treatment (OR 10.3; 95% CI 1.06 – 100.05; p <0.05). Conclusions: Shock and continuous hyperchlorination achieved significant Legionella reduction, but effective chlorine levels (>0.5 < 1.0 mg/L) deteriorated water quality (organoleptic and chemical). However, shock and continuous hyperchlorination remains a valid-term option in old buildings with no water system rational design, managing problems due to hospital extension and absence of a proper hot water recirculation system. [ABSTRACT FROM AUTHOR]