Search

In this study, an AhR-responsive reporter-gene cell-based bioassay CALUX was used to assess the biological potency of dioxins and dioxin-like PCBs (dl-PCBs) in top soil samples collected from a former airbase (A-So) and remote regions from urban and agricultural areas in Thua Thien Hue, Vietnam. In top soil collected from A-So airbase, Bioanalytical EQuivalent (BEQ) concentrations of up to 2700 pg 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) per g dry weight (pg BEQ-TCDD g -1 dw) were assessed. Interestingly, while BEQ values for dl-PCBs were found to be up to 13 pg BEQ-TCDD g -1 dw, the dl-PCB activity was not detected in all the hotspot sample extracts. In contrasts, BEQ values for dioxin like compounds from remote regions were much lower and occasionally below the quantification limits of the method. The BEQ activities obtained in this study have a similar trend to the WHO-TEQ results for the samples collected in the A-So airbase. However, BEQ values were higher than those of TEQ, probably reflecting the presence of additional AhR ligands and/or possible non-additive interactions in the sample mixture. This study confirms that after more than 60 years, a strong residual pollution of PCDD/Fs remains on this former air base following the use and storage of Agent Orange during the Vietnam War, raising a health risk for populations exposed in this area because livestock animals graze there., (Copyright © 2021 The Authors. Published by Elsevier Inc. All rights reserved.)

Organic-diffusive gradients in thin-film samplers (o-DGT), were developed and applied for accumulation of estrogen and estrogen-like compounds on a XAD18 resin and deployed in situ in the effluents of Beijing Gaobeidian Wastewater Treatment Plant (GWWTP) and Brussels North Wastewater Treatment Plant as well as in several aquatic systems in Belgium, including the Zenne River, the Belgian Oostende Harbor and the North Sea. Estrogenic compounds accumulate on the XAD18 resin and the estrogenic activity of the resin extract was measured with the Estrogen Responsive Elements-Chemically Activated LUciferase gene eXpression (ERE-CALUX) bioassay. With this result and by applying Fick's diffusion law, it is possible to calculate the estrogenic activity in the aquatic system, if the diffusion boundary layer (DBL) is known or negligible compared to the hydrogel diffusive layer thickness. The DBL thickness in our study varied from 0.010 to 0.023 cm and ignoring the DBL thickness would for instance, underestimate the estrogenic activity by 10-20%. Estrogenic activities in the secondary effluent of GWWTP were the highest (29 ± 4 ng E2-equivalents L -1 ), while the lowest level was found at the Belgian Oostende Harbor (0.05 ± 0.01 ng E2-equivalents L -1 ). Comparable estrogenic activities in water samples measured by o-DGT and grab sampling were obtained, confirming that o-DGT can be efficiently used in various aquatic systems. The advantage of our sampling and measuring method is that very low, time averaged estrogenic activities can be determined, with a minimum of sample treatment. The risk of sample contamination is very low as well as the cost of the whole analytical procedure., (Copyright © 2019 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Concentrations of Al, As, Bi, Cd, Co, Cr, Cu, Fe, Mn, Mo, Ni, Pb, U, V and Zn were quantified in surface sediments collected from 13 different sampling sites from Cau Hai lagoon in Central Vietnam, and in 8 wild and farmed-fishes involving both pelagic and benthic species. Multivariate analysis shows that these trace elements are mainly associated with lithogenic matter, and are most likely the result of alteration and erosion processes in the lagoon. Enrichment factors and geo-accumulation indices reveal substantial sediment enrichments for both As and Bi with respect to the mean composition in the upper continental crust. As is enriched in the edible portion of fish tissue with values up to 10 times higher than the allowed limits set up by Health Canada. Target hazard quotient and target carcinogenic risk for As were assessed through fish diet and were greater than 1 and 10 -4 , respectively, indicating potential health risks for fish consumers in Cau Hai lagoon., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

When compared to the European guidelines, PM 10 (particulate matter up to 10-μm size) concentrations in Algeria are often exceeding the maximum limits, and in general, no information exists on the compounds bound on its surface. The objective of this study was to measure the dioxin-like activity of polychlorinated dibenzodioxines and dibenzofurans (PCDD/Fs) and dioxin-like polychlorinated biphenyls (PCBs) in the PM 10 fraction at the Sour El Ghozlane cement plant in Algeria. PM 10 samples (n = 23) were taken between 24 March and 15 April 2013, using a medium volume sampler and 47-mm PTFE filters. The 24-h samples were dried to determine the PM 10 content and afterward extracted, cleaned up, and analyzed with the dioxin-responsive element-chemical-activated luciferase gene expression (DRE-CALUX) bioassay. Our results showed that the measured bioanalytical equivalents (BEQs) were similar to those in other international industrial sites worldwide. The PCDD/Fs and dioxin-like PCBs (dl-PCBs) were positively correlated (rho = 0.6, p = 0.002), indicating that they have similar sources. Furthermore, samples from March showed higher PCDD/F and dl-PCB BEQs and humidity but lower temperatures compared to samples from April, while there was no difference in the PM 10 concentrations between the two months. These results reveal that PM 10 alone is not a good proxy and that meteorological conditions are an important factor in assessing dioxin-like pollution in the atmosphere. It seems that, at present, there is no health hazard through direct airborne human exposure to dioxin-like pollutants in PM 10 from this site. However, it is important to monitor these POPs for a longer period of time and also to gain more insight in their distribution between the particulate and gas phase in relation to meteorological conditions.

Background: Endocrine disrupting chemicals represent a broad class of compounds, are widespread in the environment and can pose severe health effects., Objectives: The objective of this study was to investigate and compare the overall estrogen and androgen activating potential of PM10 air samples at an urban, rural and industrial location in Flanders, using a human in vitro cell bioassay., Methods: PM10 samples were collected on glass fiber filters every six days between April 2013 and January 2014 using a high-volume sampler. Extraction was executed with a hexane/acetone mixture before analysis using a recombinant estrogen- or androgen responsive human carcinoma cell line. Results were expressed as bioanalytical equivalents (BEQs) per cubic meter of air., Results: High fluctuations in estrogenic activity were observed during the entire sampling period, with median BEQs of 32.1, 35.9 and 31.1 fg E2-Eq m(-)³ in the industrial, urban and rural background area, respectively. Estrogenic activity was measured in 70% of the samples, while no androgenic activity was observed in any of the samples. The estrogenic activity in the industrial area was positively correlated with the airborne concentration of the sum of the non-carcinogenic PAHs pyrene and fluoranthene (rho=0.48; p<0.01) and the sum of the carcinogenic PAHs (rho=0.36; p=0.05)., Conclusions: This study showed that no androgenic activity was present in PM10 and that although the median estrogenic activity was rather low and comparable in the three locations, high fluctuations in estrogenic response exist over time. While atmospheric PAHs contributed to the observed estrogenic response, especially in the industrial area, the chemicals responsible for the majority of estrogenic activity remain to be identified., (Copyright © 2016 Elsevier Inc. All rights reserved.)

Coastal systems act as a boundary between land and sea. Therefore, assessing pollutant concentrations at the coast will provide information on the impact that land-based anthropogenic activities have on marine ecosystems. Sediment and fauna samples from 13 stations along the whole coast of Cameroon were analyzed to assess the level of trace metal pollution in sediments and intertidal fauna. Sediments showed enrichment of As, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, V, and Zn. However, pollution of greater concern was observed for Cd, Cr, Cu, Ni, and Zn at the northern stations. Some sites recorded trace metal levels higher than recommended in sediment quality guidelines. Species diversity was low, and high bioaccumulation of trace metals was observed in biological samples. Some edible gastropod species accumulated trace metals above the safety limits of the World Health Organization, European Medicine Agency, and the US Environment Protection Agency. Although industrial pollution is significant along Cameroon's coast, natural pollution from the volcano Mount Cameroon is also of concern.

Predicting metal concentrations in surface waters is an important step in the understanding and ultimately the assessment of the ecological risk associated with metal contamination. In terms of risk an essential piece of information is the accurate knowledge of the partitioning of the metals between the dissolved and particulate phases, as the former species are generally regarded as the most bioavailable and thus harmful form. As a first step towards the understanding and prediction of metal speciation in the Scheldt Estuary (Belgium, the Netherlands), we carried out a detailed analysis of a historical dataset covering the period 1982-2011. This study reports on the results for two selected metals: Cu and Cd. Data analysis revealed that both the total metal concentration and the metal partitioning coefficient (Kd) could be predicted using relatively simple empirical functions of environmental variables such as salinity and suspended particulate matter concentration (SPM). The validity of these functions has been assessed by their application to salinity and SPM fields simulated by the hydro-environmental model SLIM. The high-resolution total and dissolved metal concentrations reconstructed using this approach, compared surprisingly well with an independent set of validation measurements. These first results from the combined mechanistic-empirical model approach suggest that it may be an interesting tool for risk assessment studies, e.g. to help identify conditions associated with elevated (dissolved) metal concentrations., (Copyright © 2013 Elsevier B.V. All rights reserved.)

Ceramic passive samplers or toximeters (packed with active carbon 1%, w/w, on celite), in combination with the CALUX bioassay have been used as a time-integrated monitoring technique for dissolved dioxin-like PCBs in urban and industrial wastewaters. The technique showed to be reliable during laboratory experiments: (1) PCB-126 amounts extracted from the passive samplers increased linearly with the time of exposure and (2) PCB-126 concentrations calculated from the amounts accumulated by the passive samplers were in agreement with their concentrations in the testing solution. Afterwards the toximeters were applied in the field. Two sampling sites located in Egypt were chosen: the Belbeis drainage canal, and the EMAK paper mill. A total of 18 ceramic toximeters were exposed to the wastewater in both sampling sites for a maximum period of 4 weeks. Two samplers were collected weekly from each site to monitor the increase in target analytes over time. Extracts were analyzed using the CALUX bioassay and the total dioxin-like PCB toxicity was reported for the aqueous phase (water column), as well as the solid phase (sediment and sludge) in both sampling sites. The time-weighted average concentration (TWA) of dl-PCBs in wastewater of the paper mill during the sampling period ranged between 7.1 and 9.1 pg-BEQL(-1), while that of the drainage canal ranged between 9.5 and 12.2 pg-BEQL(-1). The dl-PCBs in the fibrous sludge (paper mill) and bottom sediment (drainage canal) were 0.5 and 0.4 pg-BEQg(-1) dry-weight, respectively. The organic-carbon normalized partition coefficients between sediment and water (logKoc) for the paper mill and the canal were 2.4 and 4.3, respectively., (Copyright © 2013 Elsevier B.V. All rights reserved.)

The ceramic toximeter as a passive sampler in combination with the CALUX bioassay was utilized as a time-integrated pollution-assessment technique for dioxin-like PCDD/Fs in wastewaters. Toximeters filled with XCARB and enclosed in stainless steel cages were submerged in wastewater of Belbeis drainage-canal and EMAK paper-mill, located in Egypt, for 28 days. Two samplers were removed every week from each site. Extracts from toximeters, from bottom-sediments, and from paper-mill sludge were analyzed by the CALUX. Results showed a regular increase in the amounts of PCDD/Fs trapped by the toximeters as sampling time increased. Time-weighted average concentrations (TWA) of PCDD/Fs in the wastewaters of the drainage-canal and paper-mill were 231 (214-281) and 26 (24.1-32.6) pg-BEQL(-1), respectively. Compared to literature data, this means a high pollution level for the drainage-canal water, while the pollution level in the paper-mill wastewater is similar to that reported for other paper mills. The PCDD/Fs levels in the drainage-canal bottom-sediments and in the paper-mill sludge were 8.3 and 14.6 pg-BEQg(-1) dry-weight, at the lower end of internationally reported values in similar compartments. The sampling rate of the tested toximeters for dissolved PCDD/Fs was about 3.6 mL d(-1). Sediment/water partitioning coefficient logKd of PCDD/Fs in the drainage-canal and the paper-mill was 1.42 and 2.70 respectively. The organic-carbon normalized partition coefficient logKoc was 4.17 and 3.19 respectively, and is lower than the reported values for other sites., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

Passive sampling of organic pollutants is a new trend in environmental monitoring and analysis. Passive samplers are being developed to overcome the drawbacks of the conventional snapshot sampling approach. The ceramic toximeter is a promising passive sampler for monitoring dioxin-contaminated surface and ground waters. It consists of an alumina cylinder lined with a thin coating of titania and a pore diameter of 0.05 μm. The cylinder serves as a diffusion barrier limiting the analyte transport to molecular diffusion only, as well as a container for a selective trapping material of a high capacity and affinity towards the chemical(s) of concern. The cylinder is closed from both sides with PTFE caps. The ceramic toximeter was filled with activated carbon as the trapping material and has been tested in vitro for the sampling of dioxin-contaminated water. In addition, the utilization of the CALUX bioassay technique for analyzing the trapped dioxin has greatly reduced the time and costs for dioxin scanning in aqueous media. Exposure times varied between 1 and 7 days in a solution of 1.35 ng-TCDDL(-1) (TCDD is 2,3,7,8-tetrachlorodibenzodioxin). The mean effective molecular diffusion coefficient of TCDD in the toximeter amounts to 11.9×10(-6)m(2)d(-1) while the minimum concentration detectable in an aquatic system after 30 days of exposure amounts to 0.89 pg-TCDDL(-1)., (Copyright © 2011 Elsevier B.V. All rights reserved.)

Since the CALUX (Chemically Activated LUciferase gene eXpression) bioassay is a fast, sensitive and inexpensive tool for the analysis of a high number of samples, validation of new methods is urgently needed. In this study, a new method for the analysis of PCDD/Fs and dioxin-like PCBs in atmospheric deposition samples with the CALUX bioassay was developed, optimized and validated. The method consists of 4 steps: filtration, extraction, clean up and bioassay analysis. To avoid the use of large amounts of toxic solvents, new techniques were used for filtration and extraction: a C18 filter was used instead of a liquid/liquid extraction and an Accelerated Solvent Extractor (ASE) was used instead of the traditional soxhlet extraction. After pre-oxidation of the sample extract, clean up was done using a multi-layer silica gel column coupled to a carbon column. The PCDD/F and PCB fractions were finally analyzed with the H1L7.5c1 and/or the H1L6.1c3 mouse hepatoma cell lines. The limit of quantification was 1.4pg CALUX-BEQm(-2)d(-1) for the PCBs and 5.6pgCALUX-BEQm(-2)d(-1) for the PCDD/Fs, when using the new sensitive H1L7.5c1 cell line. The GC-HRMS recovery for all PCDD/F congeners was between 55% and 112%, with a mean recovery of 90%. CALUX recoveries of spiked procedural blanks were between the accepted ranges of 80-120%. Repeatability and reproducibility were satisfactory and no interferences from metals were detected. The first results from the Flemish measurement program showed good correlation between CALUX and GC-HRMS., (Copyright © 2010 Elsevier Ltd. All rights reserved.)

Total and methylmercury concentrations were assessed in muscle and liver of 141 fish samples from the northern part of the Persian Gulf. All fish samples belonged to five different species: grunt, flathead, greasy grouper, tiger-tooth croaker, and silver pomfret. In addition, Hg and methylmercury were analyzed in scalp hair of 19 fishermen living in the same coastal stations of the Persian Gulf and consuming several fish meals a week. Total mercury concentrations in fish muscle and liver ranged from 0.01 to 1.35 microg g(-1) w.w. and from 0.02 to 1.30 microg g(-1) w.w., respectively. In fish muscle, 3% of the Hg concentrations were higher than 0.5 microg g(-1) w.w., which corresponds to the maximum acceptable WHO level, while 9% were in the range of polluted fish (between 0.3 and 0.5 microg g(-1) w.w.). The highest mercury concentrations in fish muscle were observed in flathead fish at Abadan (average of 0.68 microg g(-1) w.w.). Methylmercury fractions in fish muscle and liver amount to 34-99% (median 64%) and 24-70% (median 43%), respectively. The mean total Hg concentration in the fishermen's scalp hair amounted to 2.9 +/- 2.2 microg g(-1), with 68% in the form of methylmercury. Ninety-five percent of the Hg levels in the fishermen's hair were below 10 microg g(-1), which is the WHO warning limit. In addition, relationships between the mercury levels in hair, on the one hand, and exposure-related factors such as Hg levels in specific fish species, regional differences, and number of fish meals, on the other hand, are discussed. It appears that a significant correlation for example exists between Hg levels human hair and fish muscle or human hair and age and that mean mercury levels in fish muscle and human hair decreased from western (Abadan) to eastern (Abbas port) coastal sites.

High resolution profiles of Mn, Tl and Fe concentrations have been assessed in the pore waters of river Leie sediments at Warneton and Menen (at the border of Belgium and France) by DET (Diffusive Equilibrium in Thin Films) and DGT (Diffusive Gradients in Thin Films) techniques. The oxidized, solid Mn (IV), Tl (III) and Fe (III) compounds were reduced in the suboxic (+255 to -20 mV versus Standard Hydrogen Electrode (SHE)) riverine sediments and since these reduced species are much more soluble also they are released into the pore waters. The highest DET (total dissolved) concentrations of Fe (76 mg l(-1)), Mn (2 mg l(-1)) were observed at the station of Menen, while Tl maxima differed only slightly between the 3 surveys (21 to 27 microg l(-1)). The average ratios of Fe/Mn/Tl in the pore waters at the 3 sampling stations are fairly constant for both the DET and DGT samplings. However, the results indicate that compared to Fe and Tl a greater proportion of the Mn measured by DET is accumulated by DGT, reflecting the ready supply of Mn from solid phase to solution.