Search

We have developed and applied a relatively simple disaggregation scheme that uses spatial patterns of Land Surface Temperature (LST) from MODIS warm-season composites to improve the spatial characterization of daily maximum and minimum air temperatures. This down-scaling model produces qualitatively reasonable 1 km daily maximum and minimum air temperature estimates that reflect urban and coastal features. In a 5-city validation, the model was shown to provide improved daily maximum air temperature estimates in the three coastal cities, compared to 12 km NLDAS-2 (North American Land Data Assimilation System). Down-scaled maximum temperature estimates for the other two (non-coastal) cities were marginally worse than the original NLDAS-2 temperatures. For daily minimum temperatures, the scheme produces spatial fields that qualitatively capture geographic features, but quantitative validation shows the down-scaling model performance to be very similar to the original NLDAS-2 minimum temperatures. Thus, we limit the discussion in this paper to daily maximum temperatures. Overall, errors in the down-scaled maximum air temperatures are comparable to errors in down-scaled LST obtained in previous studies. The advantage of this approach is that it produces estimates of daily maximum air temperatures, which is more relevant than LST in applications such as public health. The resulting 1 km daily maximum air temperatures have great potential utility for applications such as public health, energy demand, and surface energy balance analyses. The method may not perform as well in conditions of strong temperature advection. Application of the model also may be problematic in areas having extreme changes in elevation., Competing Interests: The authors have declared that no competing interests exist.

Regulatory monitoring networks are often too sparse to support community-scale PM 2.5 exposure assessment while emerging low-cost sensors have the potential to fill in the gaps. To date, limited studies, if any, have been conducted to utilize low-cost sensor measurements to improve PM 2.5 prediction with high spatiotemporal resolutions based on statistical models. Imperial County in California is an exemplary region with sparse Air Quality System (AQS) monitors and a community-operated low-cost network entitled Identifying Violations Affecting Neighborhoods (IVAN). This study aims to evaluate the contribution of IVAN measurements to the quality of PM 2.5 prediction. We adopted the Random Forest algorithm to estimate daily PM 2.5 concentrations at a 1-km spatial resolution using three different PM 2.5 datasets (AQS-only, IVAN-only, and AQS/IVAN combined). The results show that the integration of low-cost sensor measurements is an effective way to significantly improve the quality of PM 2.5 prediction with an increase of cross-validation (CV) R 2 by ~0.2. The IVAN measurements also contributed to the increased importance of emission source-related covariates and more reasonable spatial patterns of PM 2.5 . The remaining uncertainty in the calibrated IVAN measurements could still cause apparent outliers in the prediction model, highlighting the need for more effective calibration or integration methods to relieve its negative impact., (Copyright © 2019 Elsevier Inc. All rights reserved.)

Fine particulate matter (PM 2.5 ) is a well-established risk factor for public health. To support both health risk assessment and epidemiological studies, data are needed on spatial and temporal patterns of PM 2.5 exposures. This review article surveys publicly available exposure datasets for surface PM 2.5 mass concentrations over the contiguous U.S., summarizes their applications and limitations, and provides suggestions on future research needs. The complex landscape of satellite instruments, model capabilities, monitor networks, and data synthesis methods offers opportunities for research development, but would benefit from guidance for new users. Guidance is provided to access publicly available PM 2.5 datasets, to explain and compare different approaches for dataset generation, and to identify sources of uncertainties associated with various types of datasets. Three main sources used to create PM 2.5 exposure data are ground-based measurements (especially regulatory monitoring), satellite retrievals (especially aerosol optical depth, AOD), and atmospheric chemistry models. We find inconsistencies among several publicly available PM 2.5 estimates, highlighting uncertainties in the exposure datasets that are often overlooked in health effects analyses. Major differences among PM 2.5 estimates emerge from the choice of data (ground-based, satellite, and/or model), the spatiotemporal resolutions, and the algorithms used to fuse data sources. Implications : Fine particulate matter (PM 2.5 ) has large impacts on human morbidity and mortality. Even though the methods for generating the PM 2.5 exposure estimates have been significantly improved in recent years, there is a lack of review articles that document PM 2.5 exposure datasets that are publicly available and easily accessible by the health and air quality communities. In this article, we discuss the main methods that generate PM 2.5 data, compare several publicly available datasets, and show the applications of various data fusion approaches. Guidance to access and critique these datasets are provided for stakeholders in public health sectors.

This ecological study aimed to assess the association between long-term exposures to outdoor environmental factors and mortality rate from cardiovascular disease (CVD) in a diverse and spatially distributed population from 3,094 counties within the U.S. (n > 3,780,000 CVD deaths) using satellite-derived data of PM 2.5 concentrations, sunlight, and maximum heat index. Multivariable logistic regression analyses were conducted to determine whether PM 2.5 , sunlight and maximum heat index were related to the odds of the total CVD death rate based on gender, race, and age taking into consideration the confounding risk factors of diabetes, obesity, leisure- time physical inactivity, smoking and socioeconomic status. The study has shown that elevated levels of PM 2.5 , sunlight and heat long-term exposures are significantly associated with an increase in the odds ratio of the total CVD mortality. The results suggest a 9.8% (95% CI = 6.3% - 13.4%), 0.9% (95% CI = 0.5% - 1.2%), and 0.7% (95% CI = 0.5% - 11.2%) increase in total CVD mortality associated with 10 μg/m 3 increase in PM 2.5 concentrations, 1,000 kJ/m 2 increases in sunlight, and 1 o F increase in heat index, respectively. The odds ratios for the CVD death rate due to long-term exposures of PM 2.5 , sunlight, and heat index were significantly greater than 1.0 for all categories except for Asians, Hispanics, and American Indians, indicating that the effect of long-term exposures to particulate matter, sunlight radiation, and maximum heat on CVD mortality is trivial for Asians, Hispanics, and American Indians. Among the categories of age, the group of 65 years and older had the highest odds ratios, suggesting that the age group of 65 years and older are the most vulnerable group to the environmental exposures of PM 2.5 (OR = 1.179, 95% CI = 1.124 - 1.237), sunlight (OR = 1.047, 95% CI = 1.041 - 1.053), and maximum heat (OR = 1.014, 95% CI = 1.011 - 1.016). The odds ratios of CVD mortality due to the environmental exposures were higher for Blacks than those for Whites. The odds ratios for all categories were attenuated with the inclusion of diabetes, obesity, leisure-time physical inactivity, smoking, and income covariates, reflecting the effect of other medical conditions, lifestyle, behavioral and socioeconomic factors on the CVD death rate besides the environmental factors.

This study aimed to assess the association between exposures to outdoor environmental factors and autism spectrum disorder (ASD) prevalence in a diverse and spatially distributed population of 8-year-old children from the USA (n = 2,097,188) using the air quality index (AQI) of the US Environmental Protection Agency as well as satellite-derived data of PM 2.5 concentrations, sunlight, and maximum heat index. Multivariable logistic regression analyses were performed to determine whether the unhealthy AQI, PM 2.5 , sunlight, and maximum heat index were related to the odds of ASD prevalence based on gender and race and taking into consideration the confounding factors of smoking and socioeconomic status. The logistic regression odds ratios for ASD per 10% increase in the unhealthy AQI were greater than 1 for all categories, indicating that unhealthy AQI is related to the odds of ASD prevalence. The odds ratio of ASD due to the exposure to the unhealthy AQI was higher for Asians (OR = 2.96, 95% CI = 1.11-7.88) than that for Hispanics (OR = 1.308, 95% CI = 0.607-2.820), and it was higher for Blacks (OR = 1.398, 95% CI = 0.827-2.364) than that for Whites (OR = 1.219, 95% CI = 0.760-1.954). The odds ratio of ASD due to the unhealthy AQI was slightly higher for males (OR = 1.123, 95% CI = 0.771-1.635) than that for females (OR = 1.117, 95% CI = 0.789-1.581). The effects of the unhealthy environmental exposures on the odds ratios of ASD of this study were inconclusive (i.e., statically insignificant; p value > 0.05) for all categories except for Asians. The odds ratios of ASD for Asians were increased by 5, 12, and 14% with increased levels of the environmental exposures of 10 μg/m 3 of PM 2.5 , 1000 kJ/m 2 of sunlight, and 1 °F of maximum heat index, respectively. The odds ratios of ASD prevalence for all categories, except for Asians, were increased with the inclusion of the smoking covariate, reflecting the effect of smoking on ASD prevalence besides the unhealthy environmental factors.

A public participatory geographical information systems (PPGIS) demographic, environmental, socioeconomic, health status portal was developed for the Stambaugh-Elwood (SE) community in Columbus, OH. We hypothesized that soil at SE residences would have metal concentrations above natural background levels. Three aims were developed that allowed testing of this hypothesis. Aim 1 focused on establishing partnerships between academia, state agencies and communities to assist in the development of a community voice. Aim 2 was to design and conduct soil sampling for residents of the SE community. Aim 3 was to utilize our interactive, customized portal as a risk communication tool by allowing residents to educate themselves as to the potential risks from industrial sources in close proximity to their community. Multiple comparisons of means were used to determine differences in soil element concentration by sampling location at p < 0.05. The results demonstrated that eight metals (As, Cd, Cu, Pb, Mo, Se, Tl, Zn) occurred at statistically-significantly greater levels than natural background levels, but most were below risk-based residential soil screening levels. Results were conveyed to residents via an educational, risk-communication informational card. This study demonstrates that community-led coalitions in collaboration with academic teams and state agencies can effectively address environmental concerns.

This study describes and demonstrates different techniques for surface fitting daily environmental hazards data of particulate matter with aerodynamic diameter less than or equal to 2.5 microm (PM2.5) for the purpose of integrating respiratory health and environmental data for the Centers for Disease Control and Prevention (CDC) pilot study of Health and Environment Linked for Information Exchange (HELIX)-Atlanta. It presents a methodology for estimating daily spatial surfaces of ground-level PM2.5 concentrations using the B-Spline and inverse distance weighting (IDW) surface-fitting techniques, leveraging National Aeronautics and Space Administration (NASA) Moderate Resolution Imaging Spectrometer (MODIS) data to complement U.S. Environmental Protection Agency (EPA) ground observation data. The study used measurements of ambient PM2.5 from the EPA database for the year 2003 as well as PM2.5 estimates derived from NASA's satellite data. Hazard data have been processed to derive the surrogate PM2.5 exposure estimates. This paper shows that merging MODIS remote sensing data with surface observations of PM,2. not only provides a more complete daily representation of PM,2. than either dataset alone would allow, but it also reduces the errors in the PM2.5-estimated surfaces. The results of this study also show that although the IDW technique can introduce some numerical artifacts that could be due to its interpolating nature, which assumes that the maxima and minima can occur only at the observation points, the daily IDW PM2.5 surfaces had smaller errors in general, with respect to observations, than those of the B-Spline surfaces. Finally, the methods discussed in this paper establish a foundation for environmental public health linkage and association studies for which determining the concentrations of an environmental hazard such as PM2.5 with high accuracy is critical.

Worldwide, coral reef ecosystems are being increasingly threatened by sediments loads from river discharges, which in turn are influenced by changing rainfall patterns due to climate change and by growing human activity in their watersheds. In this case study, we explored the applicability of using remote sensing (RS) technology to estimate and monitor the relationship between water quality at the coral reefs around the Rosario Islands, in the Caribbean Sea, and the rainfall patterns in the Magdalena River watershed. From the Moderate Resolution Imaging Spectroradiometer (MODIS), this study used the water surface reflectance product (MOD09GQ) to estimate water surface reflectance as a proxy for sediment concentration and the land cover product (MCD12Q1 V51) to characterize land cover of the watershed. Rainfall was estimated by using the 3B43 V7 product from the Tropical Rainforest Measuring Mission (TRMM). For the first trimester of each year, we investigated the inter-annual temporal variation in water surface reflectance at the Rosario Islands and at the three main mouths of the Magdalena River watershed. No increasing or decreasing trends of water surface reflectance were detected for any of the sites for the study period 2001–2014 ( p > 0.05) but significant correlations were detected among the trends of each site at the watershed mouths ( r = 0.57–0.90, p < 0.05) and between them and the inter-annual variation in rainfall on the watershed ( r = 0.63–0.67, p < 0.05). Those trimesters with above-normal water surface reflectance at the mouths and above-normal rainfall at the watershed coincided with La Niña conditions while the opposite was the case during El Niño conditions. Although, a preliminary analysis of inter-annual land cover trends found only cropland cover in the watershed to be significantly correlated with water surface reflectance at two of the watershed mouths ( r = 0.58 and 0.63, p < 0.05), the validation analysis draw only a 40.7% of accuracy in this land cover classification. This requires further analysis to confirm the impact of the cropland on the water quality at the watershed outlets. Spatial analysis with MOD09GQ imagery detected the overpass of river plumes from Barbacoas Bay over the Rosario Islands waters. [ABSTRACT FROM AUTHOR]