Search

This lecture presents four case history examples of erosion processes. Because the topic of soil and rock erosion is relatively underdeveloped in geotechnical engineering, an introduction precedes the case histories to describe some fundamental aspects of erosion. Erosion involves the soil or rock through its erodibility, the water through its velocity, and the geometry of the obstacle through its size and shape. Knowledge of these three components is needed for any erosion problem to be studied and solved. A set of fundamental issues are addressed in the first part including an erodibility classification for soils and rocks, an explanation of the stresses imposed by the water on the soil-water or rock-water interface, and an explanation of how the geometry impacts the problem. The Woodrow Wilson Bridge case history outlines a new and less conservative method to compute the scour depth and gives examples of bridge scour calculations. The Brazos River meander case history outlines a new method to predict meander migration and gives an example of migration calculations. The Pointe du Hoc case history gives an explanation of a process of rock cliff erosion. The New Orleans levees case history gives an example of erosion of levees by overtopping and proposes an erosion design chart for levee overtopping. Whenever possible the results are presented in a probabilistic fashion. All case histories make use of the erosion function apparatus, an apparatus developed to quantify the erodibility of a soil or rock and to give the constitutive law for erosion problems: the erosion function. The power point slides for the lecture including many photos of the case histories are available at under “Lectures” and the video (DVD) of the lecture is available from the author, free of charge. [ABSTRACT FROM AUTHOR]

The San Jacinto Monument was built in 1936 to commemorate the 100-year anniversary of the victory of the Texan army over the Mexican army. The victory at the battle of San Jacinto followed the defeat at the battle of the Alamo and secured the independence of Texas, as well as several other states along the Mexican border. The monument consists of a 176.5-m-high column resting on a large square mat with each side=37.8 m. The mat foundation was designed by Raymond Dawson who chose an average pressure of 223.8 kPa under the mat. Dawson had settlement points placed on the mat foundation together with benchmarks away from the monument. The settlement of the monument has been recorded over the last 70 years and shows a total settlement to date of 0.329 m. The settlement appears to be almost complete. This remarkable case history is used to evaluate current practice of calculating consolidation settlement and a best approach is suggested for such structures. Other issues addressed include the depth of influence, the time rate of settlement, the elastic-modulus approach, and the ultimate bearing capacity. [ABSTRACT FROM AUTHOR]

There is a trend toward using the modulus as an alternative to dry density in compaction control because of the undesirable nuclear source in the current field density gage and because a modulus is often used in the design of roadway bases and compacted fills. The Briaud compaction device (BCD) is a new instrument used to obtain a soil modulus in only a few seconds; it consists of leaning on a rod equipped with a thin circular metal plate at the bottom end and recording the bending of that plate under a standard load. This article describes the theory and the experiments that have been performed to validate the new instrument. This validation is based on a comparison to a simple plate test and on a numerical simulation of the BCD test. A recommended procedure is outlined in the conclusions. The BCD is used in the lab on top of the soil in the Proctor mold to obtain the lab modulus versus water content curve and select a target value. Then the BCD is used in the field to verify that the target modulus has been achieved. [ABSTRACT FROM AUTHOR]