Search

The paper presents the results of comparative wearing of cultivator hoes protected with two different materials with regard to the lifespan of the blades. During the operation of the hoes outside the track of the tractor wheels with protected blades of materials M1 and M2, equal wear of mass and surface was recorded. The hoes lost an average of 0,563 g/ha cultivated area or an average of 119,46 g with a standard deviation of 2,876 when working with both blades in compacted soil (in the tracks of tractor wheels) protected by M1 material. For hoes protected by M2 material, the average loss was 0,566 g/ha of cultivated area or an average of 120,10 g for the research period with a standard deviation of 4,609. Both materials in the most difficult working conditions showed equal resistance to wear and retention of the initial shape of the hoe.

The research results of the spraying technical factors' impact on ground and air drift, and the deposit on the treetop in cherry orchards, are presented in the paper. Two different spraying systems (classical and sensory system) are investigated, Agromehanika AGP 200 ENU sprayer being used. The research is conducted according to ISO standard 22866 (Plant Protection Equipment - Drift Measurement Methods in Field Conditions). The impact of spraying norm as factor A (A1 – 250 l/ha; A2 – 200 l/ha); the nozzle type as factor B (B1 – Lechler TR 8002 C; B2 – Lechler ITR 8002 C) and the fan air velocity as factor C (C1 – 18 m/s; C2 – 12 m/s) are examined by the variance analysis. To spray and evaluate the drift, Tartazine organic dye solution with 4% concentration is used. The filter papers, used as collectors, according to the specified ISO standard, are placed directly in the spraying zone. The sampled filter papers are washed out with 10 ml of deionised water under laboratory conditions. After washing, the colour intensity, i.e., the solution wave-length, is read by a spectrophotometer (Varian Cary 50 UV-Visible). Different drift intensity (ground and air drift) and treetop deposits are realized by the usage of various treatments of technical spraying factors and various spraying systems. Unlike the ground and air drifts, the deposit within the treetop does not show statistically significant change by using a sensory spraying system, i.e. by using a selective application.

The wear of induction cladded coating during motion was investigated through the abrasive mass at a speed of 1.0 to 3.0 m/s and the impact angle of abrasive particles with a worn surface of 0° to 90°. Cladding was performed by using Ni-Cr-Si-B-Fe flame spraying powder. Experimental research was carried out by using the Response Surface Method (RSM) and Central Composite Design (CCD). Analysis of variance proved that both motion speed and impact angle had significant impact on the wear of coating, both individually and interactively. Motion speed had the greatest influence, and the interaction of speed and angle had the least influence. The wear rate increased along with the motion speed increase, and the influence of the impact angle depends on the wear speed. At a speed of 1 m/s, the wear increases along with the increase of angle from 0° to 45° and then continues to decrease up to the angle of 90°. At a speed of 2 m/s, the wear increases along with the angle increase from 0° to 30° and then continues to decrease up to the angle of 90°. At a speed of 3 m/s, the wear increases along with the angle increase from 0° to 20° and then decreases as the angle increases up to 90°. Based on the statistical data processing, this research developed the mathematical model of wear in the form of quadratic polynomial that describes the influences of input variables in individual and interactive form.