Search

The ZrC coating layer is a candidate to replace the SiC coating layer of the Triso-coated fuel particle for high-temperature gas-cooled reactors. To understand mechanisms of the good retention capabilities for fission product caesium of the ZrC Triso-coated fuel particles, the particles after post-irradiation heating tests were examined individually with X-ray microradiography and the caesium inventories of the fuel kernel and coating layers of each particle were measured with gamma-ray spectrometry. The fractional content of 137Cs in the fuel kernel was found to be different from particle to particle though 137Cs was not released from the particles practically. The particles, which showed relatively good retention of 137Cs in the fuel kernels, had radially broken inner pyrolytic carbon layers and deformed fuel kernels. The ZrC layer developed the caesium retention capabilities of the fuel kernel through interaction of ZrC with the fuel kernel.

The ZrC coating layer is a candidate to replace the SiC coating layer of the Triso-coated fuel particle. To compare the irradiation performance of the ZrC Triso-coated fuel particles with that of t...

The ZrC coating layer is a candidate to replace the SiC coating layer of the Triso-coated fuel particles for high-temperature gas-cooled reactors. To understand the behavior of the ZrC-Triso-coated fuel particles at 1800 to 2000°C, a ceramographic examination and an electron probe microanalysis were performed on the ZrC-Triso-coated fuel particles after the post-irradiation heating tests and a thermodynamic analysis of the ZrCUO system was carried out. Based on the results of the examination and analyses, a mechanism of the deterioration of the ZrC-Triso-coated fuel particles was proposed. The deterioration of the ZrC-Triso-coated fuel particles observed at 1800 to 2000°C was caused by the failure of the inner pyrolytic carbon layer.

The ZrC coating layer is a candidate to replace the SiC coating layer of the Triso-coated fuel particles for high-temperature gas-cooled reactors. Post-irradiation heating tests of the ZrC-Triso coated UO 2 particles were performed at 1800°C for 3000 h and at 2000°C for 100 h to study the release behavior of fission products. The fission gas release monitoring and the X-ray microradiography revealed that no through-coating failure occurred during the heating tests. The high cesium retention of the ZrC-Triso coated fuel particles was confirmed up to 1800°C. The diffusion coefficient for cesium in the ZrC layer was more than two orders smaller than that in the SiC layer at 1800°C. The diffusion coefficient for ruthenium in the ZrC layer was almost the same as that for cesium in the SiC layer.

Release behavior of fission products from ZrC-coated UO 2 particles was studied by a postirradiation heating test at 1600°C (1873 K) for 4500 h and subsequent postheating examinations. The fission gas release monitoring and the postheating examinations revealed that no pressure vessel failure occurred in the test. Ceramographic observations showed no palladium attack and thermal degradation of ZrC. Fission products of 137 Cs 134 Cs, 106 Ru, 144 Ce, 154 Eu and 155 Eu were released from the coated particles through the coating layers during the postirradiation heating. Diffusion coefficients of 137 Cs and 106 Ru in the ZrC coating layer were evaluated from the release curves based on a diffusion model. 137 Cs retentiveness of the ZrC coating layer was much better than that of the SiC coating layer.