Search

The machining process is still a very relevant process in today’s industry, being used to produce high quality parts for multiple industry sectors. The machining processes are heavily researched, with the focus on the improvement of these processes. One of these process improvements was the creation and implementation of tool coatings in various machining operations. These coatings improved overall process productivity and tool-life, with new coatings being developed for various machining applications. TiAlN coatings are still very present in today’s industry, being used due to its incredible wear behavior at high machining speeds, high mechanical properties, having a high-thermal stability and high corrosion resistance even at high machining temperatures. Novel TiAlN-based coatings doped with Ru, Mo and Ta are currently under investigation, as they show tremendous potential in terms of mechanical properties and wear behavior improvement. With the improvement of deposition technology, recent research seems to focus primarily on the study of nanolayered and nanocomposite TiAlN-based coatings, as the thinner layers improve drastically these coating’s beneficial properties for machining applications. In this review, the recent developments of TiAlN-based coatings are going to be presented, analyzed and their mechanical properties and cutting behavior for the turning and milling processes are compared.

PVD (physical vapor deposition) and CVD (chemical vapor deposition) have gained greater significance in the last two decades with the mandatory shift from electrodeposition processes to clean deposition processes due to environmental, public safety, and health concerns. Due to the frequent use of coatings in several industrial sectors, the importance of studying the chromium coating processes through PVD–sputtering can be realized, investing in a real alternative to electroplated hexavalent chromium, usually denominated by chromium 6, regularly applied in electrodeposition processes of optical products in the automotive industry. At an early stage, experimental tests were carried out to understand which parameters are most suitable for obtaining chromium coatings with optical properties. To study the coating in a broad way, thickness and roughness analysis of the coatings obtained using SEM and AFM, adhesion analyzes with the scratch-test and transmittance by spectrophotometry were carried out. It was possible to determine that the roughness and transmittance decreased with the increase in the number of layers, the thickness of the coating increased linearly, and the adhesion and resistance to climatic tests remained positive throughout the study. Thus, this study allows for the understanding that thin multilayered Cr coatings can be applied successfully to polymeric substrates regarding optical applications in the automotive industry.

The milling process is one of the most used processes in the manufacturing industry. Milling, as a process, as evolved, with new machines and methods being employed, in order to obtain the best results consistently. Milling tools have also seen quite an evolution, from the uncoated high-speed steel tool, to the now vastly used, coated tools. Information on the use of these coated tools in recent scientific researches was collected. The coatings that are currently being researched are going to be presented, highlighting some novel advances in the nanocomposite and diamond coatings area, as these coatings are seeing a growing use in the industry, with very satisfactory results, with performance and tool-life increase. Wear mechanism of various types of coatings are also a popular topic on recent research, as the cutting behavior of these coated tools provides valuable information on the tool’s-life. Furthermore, analysis of these mechanisms enables for the selection of the best coating type for the correct application. Recently, the employment of coated tools paired with sustainable lubrication methods as seen some use. As this presents the opportunity to enhance the coated tool’s and the process’s performance, obtaining better results, in terms of better tool-life and better surface finish quality, in a more sustainable fashion, This research was funded by ON-SURF Project, grant number NUP POCI-01-0247-FEDER-024521.

Turning continues to be the largest segment of the machining industry, which highlights the continued demand for turned parts and the overall improvement of the process. The turning process has seen quite an evolution, from basic lathes using solid tools, to complex CNC (Computer Numerical Control) multi-process machines, using, for the most part, coated inserts and coated tools. These coatings have proven to be a significant step in the production of high-quality parts and a higher tool life that have captivated the industry. Continuous improvement to turning coated tools has been made, with many researches focusing on the optimization of turning processes that use coated tools. In the present paper, a presentation of various recently published papers on this subject is going to be made, mentioning the various types of coatings that have recently been used in the turning process, the turning of hard to machine materials, such as titanium alloys and Inconel, as well as the interaction of these coatings with the turned surfaces, the wear patterns that these coatings suffer during the turning of materials and relating these wear mechanisms to the coated tool’s life expectancy. Some lubrication conditions present a more sustainable alternative to current methods used in the turning process; the employment of coated tool inserts under these conditions is a current popular research topic, as there is a focus on opting for more eco-friendly machining options.

Duplex stainless steels are being used on applications that require high corrosion resistance and excellent mechanical properties, such as the naval and oil-gas exploration industry. The components employed in these industries are usually obtained by machining; however, these alloys have low machinability when compared to conventional stainless steels, usually requiring the employment of tool coatings. In the present work, a comparative study of TiAlSiN coating performance obtained by these two techniques in the milling of duplex stainless-steel alloy LDX 2101 was carried out. These coatings were obtained by the conventional direct current magnetron sputtering (dc MS) and the novel high power impulse magnetron sputtering (HiPIMS). The coatings were analyzed and characterized, determining mechanical properties for both coatings, registering slightly higher mechanical properties for the HiPIMS-obtained coating. Machining tests were performed with varying cutting length and feed-rate, while maintaining constant values for axial and radial depth of cut and cutting speed. The surface roughness of the material after machining was assessed, as well as the wear sustained by each of the tool types, identifying the wear mechanisms and behavior of these tools, as well as registering the flank wear values presented for each of the tested tools. The HiPIMS-obtained coating exhibited a very similar behavior when compared to the other, producing similar surface roughness quality. However, the HiPIMS coating exhibited less wear for higher cutting lengths, proving to be a better choice in this case, especially regarding tool life.

Copper-Beryllium alloys have excellent wear resistance and high mechanical properties, they also possess good electrical and thermal conductivity, making these alloys very popular in a wide variety of industries, such as aerospace, in the fabrication of tools for hazardous environments and to produce injection molds and mold inserts. However, there are some problems in the processing of these alloys, particularly when these are subject to machining processes, causing tools to deteriorate quite rapidly, due to material adhesion to the tool’s surface, caused by the material’s ductile nature. An assessment of tool-wear after machining Cu-Be alloy AMPCOLOY 83 using coated and uncoated tools was performed, offering a comparison of the machining performance and wear behavior of solid-carbide uncoated and DLC/CrN multilayered coated end-mills with the same geometry. Multiple machining tests were conducted, varying the values for feed and cutting length. In the initial tests, cutting force values were registered. The material’s surface roughness was also evaluated and the cutting tools’ edges were subsequently analyzed, identifying the main wear mechanisms and how these developed during machining. The coated tools exhibited a better performance for shorter cutting lengths, producing a lower degree of roughness on the surface on the machined material. The wear registered for these tools was less intense than that of uncoated tools, which suffered more adhesive and abrasive damage. However, it was observed that, for greater cutting lengths, the uncoated tool performed better in terms of surface roughness and sustained wear.

In several studies about ball-cratering test, a gap remains: how the ball surface texture influences the dynamic of the particles through the contact? In this paper, the influence of ball surface texture in the dragging of abrasive particles on micro-abrasion tests was studied, and the resulting wear mechanisms have been analyzed. The tests were conducted using TiN coated samples and AISI 52100 steel balls provided with different etching times (20 s, 40 s, and 60 s), which induced different balls' texture and roughness. Normal loads of 0.2 N and 0.5 N have been used, utilizing the same rotational speed. Tree different sizes of diamond particles were used: 1–2 μm, 2–4 μm and 4–6 μm. After testing, the coated samples were analyzed by SEM. The steel ball provided with longer etching time caused a slightly higher abrasive damage on the coated samples, and the balls present some embedded particles on the surface, although less than expected. Otherwise, less etched steel ball induced a less intense wear on the samples, enabling light particle sliding/rolling. In this case, the wear rate increased from 4.6 x 10-4 mm3/N·m to 1.3 x 10-3 mm3/N·m when Sa of the balls’ surface raised from 0.047 ± 0.003 μm to 0.239 ± 0.009 μm. The wear mechanisms involved progressed from rolling abrasive mechanism to grooving abrasive mechanism with the growth of the ball surface roughness and abrasive particles size.

The automotive industry is a pioneer in solutions that meet market expectations. However, in the automotive industry, some less environmentally friendly technologies are still used, such as electroplating. Due to legislative restrictions in several countries, thin coatings made in a vacuum have been replacing coatings traditionally made by electroplating, mainly in decorative terms. This work is more focused on the use of these coatings made in vacuum for optical applications, namely on headlights and exterior backlit components. Although these components are protected during the period of use, there may be situations of contact during the assembly of the components or their repair, necessary to safeguard and to ensure that these coatings have the scratch and wear resistance needed to withstand any treatment deficiency during the operations referred to above. Therefore, this work is essentially focused on the study of the wear resistance of Cr coatings made by PVD (Physical Vapour Deposition) on polymeric substrates. To this end, the coatings previously studied have now been subjected to micro-abrasion tests, with a view to assessing their wear resistance. For this purpose, alumina abrasive has been used, and the wear mechanisms observed in the coatings were studied. The abrasion and scratch tests showed that the most stable film has the one provided with 10-layers, showing greater wear resistance as well, greater adhesion to the substrate and less cohesive failures in the performed tests. Given the nature of the substrate and the coating, the results obtained are very promising, showing that these 10-layer Cr thin coatings can overcome any careless operation during manufacturing, assembly and repair processes, when applied in lightning or backlit components in motor vehicles.