Search

This paper introduces a novel software framework to support automated development of paper-based microuidic devices. Compared to existing lab-on-a-chip technologies, paper-based microuidics difiers in terms of substrate technologies and point-of-care usage across a wide variety environmental conditions. This paper addresses the contexts in which the software can address these challenges and presents several initial case studies that demonstrate the capabilities of the framework to produce workable and usable paper microuidic devices.

Paper microfluidic devices (including lateral flow assays) offer an excellent combination of utility and low cost. Many paper microfluidic devices are fabricated using the Xerox ColorQube line of commercial wax-based color printers; the wax ink serves as a hydrophobic barrier to fluid flow. These printers are capable of depositing four different colors of ink, cyan (C), magenta (M), yellow (Y), and black (K), plus 11 combinations of these colors (CM, CY, CK, MY, MK, YK, CMY, CMK, CYK, MYK, and CMYK), although most researchers use only black ink to print paper microfluidic devices. Recently, as part of a project to develop a computer-aided design framework for use with paper microfluidics devices, we unexpectedly observed that different colors of wax ink behave differently in paper microfluidics. We found that among the single colors of ink, black ink actually had the most barrier failures, and magenta ink had the fewest barrier failures. In addition, some combinations of colors performed even better than magenta: the combinations CY, MK, YK, CMY, CYK and MYK had no barrier failures in our study. We also found that the printer delivers significantly different amounts of ink to the paper for the different color combinations, and in general, the color combinations that formed the strongest barriers to fluid flow were the ones that had the most ink delivered to the paper. This suggests that by simply weighing paper samples printed with all 15 combinations of colors, one can easily find the color combinations most likely to form a strong barrier for a given printer. Finally, to show that deliberate choices of ink colors can actually be used to create new functions in paper microfluidics, we designed and tested a new color-based "antifuse" structure that protects paper microfluidic devices from a typical operator error (addition of too much fluid to the device). Our results provide a set of color choice guidelines that designers can use to control the behavior of their paper microfluidics.

The sparse literature on the use of imperatives in research papers suggests that they are relatively common in a small number of disciplines, but rare, if used at all, in others. The present study addresses the use of imperatives in a corpus of upper-level A-graded student papers from 16 disciplines. A total of 822 papers collected within the past 5 years were analyzed for imperative use, with particular emphasis placed on the main text of papers from the five disciplines with the highest proportion of imperatives. In each of these disciplines, text-based interviews were conducted with faculty members to establish disciplinary contexts. Results show that imperatives are used frequently in physics, philosophy, economics, mechanical engineering, and linguistics, though in quite varying ways. The interview data suggest that successful and experienced student writers adopt the potentially "high risk strategy" (Hyland 2012) of initiating a sentence with an imperative for various strategic purposes that are discipline-specific. Such insights have implications for writing instructors and materials designers in both L1 and L2 contexts.

Background: To accurately measure students' science, technology, engineering and mathematics (STEM) career interest, researchers must get inside the 'black box' to understand students' conceptualizations of STEM careers., Aims: The aim of Study 1 was to explore whether students' conceptualizations of STEM included medical careers. The aim of Study 2 was to explore whether predictors of STEM career interest (e.g., gender and motivation) varied by STEM definition (inclusion/exclusion of medical careers)., Samples: In Study 1, the sample was US college students (N = 125) who were mostly White (80%). In Study 2, the sample was US 10th-grade high school students (N = 455) who were mostly Black (79%)., Methods: In Study 1, students completed an online questionnaire. In Study 2, students completed various measures of math achievement, motivation (science and math expectancies of success, interest and importance value) and career interest with an importance., Results: In Study 1, medical careers were less often classified as STEM careers than traditional STEM careers, but more often classified as STEM than non-STEM careers. In Study 2, science importance value was the only motivational predictor of students' STEM+Medicine career interest, and no motivation constructs predicted traditional STEM career interest. Boys expressed greater interest in traditional STEM careers, while girls expressed greater interest in STEM+Medicine careers., Conclusions: Students' conceptualizations of STEM are not binary. Thus, we recommend researchers are explicit about their definition of STEM with study participants, in their coding and in their publications., (© 2023 British Psychological Society.)

Engineering has been playing an important role in serving and advancing healthcare. The term "Healthcare Engineering" has been used by professional societies, universities, scientific authors, and the healthcare industry for decades. However, the definition of "Healthcare Engineering" remains ambiguous. The purpose of this position paper is to present a definition of Healthcare Engineering as an academic discipline, an area of research, a field of specialty, and a profession. Healthcare Engineering is defined in terms of what it is, who performs it, where it is performed, and how it is performed, including its purpose, scope, topics, synergy, education/training, contributions, and prospects.

In papers in areas such as engineering and the physical sciences, figures, tables and formulae are the basic elements to communicate the authors' core ideas, workings and results. As a computational text-matching tool, CrossCheck cannot work on these non-textual elements to detect plagiarism. Consequently, when comparing engineering or physical sciences papers, CrossCheck may return a low similarity index even when plagiarism has in fact taken place. A case of demonstrated plagiarism involving engineering papers with a low similarity index is discussed, and editor's experiences and suggestions are given on how to tackle this problem. The case shows a lack of understanding of plagiarism by some authors or editors, and illustrates the difficulty of getting some editors and publishers to take appropriate action. Consequently, authors, journal editors, and reviewers, as well as research institutions all are duty-bound not only to recognize the differences between ethical and unethical behavior in order to protect a healthy research environment, and also to maintain consistent ethical publishing standards.

With the advancement of specialized middle schools and high schools focusing on the arts, communication, engineering, mathematics, and science, many students who attend traditional schools miss out on valuable learning opportunities--in particular, when it comes to learning mathematics. Mathematics classrooms can be filled with real-world applications and concepts for all learners, regardless of the school environment. When teachers present middle school students with problems grounded in engineering principles, students will become active learners and will view mathematics as stimulating and useful. They will also learn that through mathematics, they can be innovative. The authors present an engineering project called "Paper Table," an investigation into building a sturdy table out of newspaper and cardboard. Engineering design projects provide an environment in which students can be active, inquisitive, and creative. Producing a paper table can lead to explorations of geometry and measurement. Concepts learned include (1) drawing and constructing polygons; (2) using a protractor to measure and draw specific angles in a polygon; (3) finding the areas of polygons; and (4) finding the surface area of three-dimensional figures. The "Paper Table" project challenges students to build a strong table that is 8 inches tall using newspaper, masking tape, and cardboard. The design requirements specify that the table must be sturdy enough to hold a heavy book. From a mathematical point of view, the "Paper Table" project revolves around properties of polygons and mathematical processes and practices. After producing models, students can ponder ways to find the area of the polygons that comprise the legs of the table. The "Paper Table" project gives students a challenge that can increase their interest in mathematics and let them recognize that engineering has many ties to the math that they study and use in class. Such STEM experiences are likely to excite, stimulate, and motivate students. The authors suggest It is time to include engineering projects in the classroom to allow today's students to embark on processes that they can develop into tomorrow's leaders in science, technology, engineering, and mathematics.

In this paper, we present an experimental study on measurement of the thermal conductivity and heat pipe effect in both hydrophilic and hydrophobic (Toray TGP-H60) carbon papers (around 200 μm thickness) with/out liquid water. An experimental setup is developed for measuring thermal conductance at different liquid water contents and temperatures without dissembling the testing device for water addition. Theoretical analysis is also performed to evaluate the apparent conductance of heat pipe effect. We found that liquid water presence inside these materials increases the overall thermal conductivity. At high temperature around 80 °C, the heat pipe effect is evident for the hydrophilic paper; while for the hydrophobic one, the heat pipe effect is found to be smaller. The distinction is likely due to the different patterns of the capillary liquid flow in the two media. For the hydrophobic paper, liquid water flows back to the evaporation side when the breakthrough pressure is reached and flow is through preferred routes of small flow resistance. As a result, heat pipe effect is active only in part of the medium, therefore smaller than that in the hydrophilic one. The results are important for understanding the heat transfer phenomena occurring in porous media and effects of material surface property. © 2012 Elsevier Ltd. All rights reserved.

There is an increasing sensitivity to the challenges posed by the language of examination papers and of instruction in scientific subjects, especially for non-native speakers of English. It has been observed that in addition to technical subject-specific vocabulary, non-technical words such as instructional verbs have been sources of difficulty, and there are indications that other "ordinary" English words cause problems. For many years the aerospace industry has striven to make its manuals understandable and unambiguous to non-native speakers, a goal shared by writers of examination papers. To achieve this, the industry uses Simplified English, a controlled language with limited vocabulary and restricted grammatical rules. While recognising the limitations of this approach, the authors considered that by testing examination papers against the rules of Simplified English, it might be possible to identify areas of potential difficulty for non-native speakers. This paper describes the results of a study which tests past examination questions using software based on AECMA Simplified English, the controlled language in established use in the British aerospace industry. The results identified many lexical items which were not in the original list of "Approved words". Some of these were technical words and others were non-technical terms which are in common use in an engineering context. However, some were potential problem sources, including implicit instructions and vague or ambiguous words. Software alerts that related to sentence structure, in particular those related to sentence complexity, indicated that some sentences had additional problems. (Contains 1 note.)

Questions are used to obtain information, stimulate thinking, and redirect reasoning. Academics in higher education use questions on a daily basis to stimulate thinking and reasoning in students. Final examination papers are used by academics to assess the retention and application skills of students. The assumption, however, exists that questions relating to application skills at universities of technology should start to dominate the higher academic levels in education, with a subsequent drop in questions regarding retention skills. These questions may be categorized as either higher order or lower order questions. This article attempts to distinguish between these two types of questions in light of Bloom's taxonomy, with similar concepts such as deep and surface learning being examined. The literature review is applied to an electrical engineering module titled Electronics, which serves as the case study. The results of this study indicate that a high percentage of the final examination papers dealt with the objective "Application," where students had to make use of numerous mathematical equations to solve various unknowns. The results also indicated that academics in electronics are using more lower order than higher order questions in their final examination papers. A balance is suggested between these two types of questions for various academic levels at universities of technology. (Contains 3 tables and 1 figure.)

The integration of online platforms in (bio)chemical engineering education has increasingly become a matter of fact at all educational levels. Examples such as virtual laboratories in tertiary education have shown their benefits, such as the decreased cost and resources needed as well as providing a safer environment for practical experimentation. However, students or stakeholders are not usually involved in developing the virtual laboratory, even if, when given the opportunity, they can provide valuable feedback for improvement and acquire ownership over the platform. Hence, when proposing a novel educational process virtual laboratory that targets teaching bioprocess modeling to undergraduate students, the best approach is to involve the students in the development as its future users. To this end, in this work, four co-participatory design experiences are presented that show the journey from a paper prototype to an online educational virtual laboratory (www.biovl.com). Qualitative and quantitative data have been collected in two different universities through surveys, semi-structured interviews, and informal conversations among the students and the developer. The students’ perspectives were found to provide valuable feedback about the platform’s content, usability, and functionality. For example, interest in adding bioprocess-related coding activities, or suggesting to change the platform name, were opinions collected and carefully considered. These suggestions can be easily integrated since the software is at the early stages of the virtual laboratory prototype. Although the usability and functionality features of the platform are under continuous advancement, this work’s findings show that the students are interested in contributing to the virtual laboratory’s development. Therefore, it opens the door to modifications and improvements, which are strongly based on the users’/students’ perceptions and perspectives as the virtual laboratory’s co-designers. Although the primary target of the BioVL prototype is to teach bioprocessing modelling, several advanced tools such as virtual and augmented reality (VR and AR) are being considered to be included at a future stage. Furthermore, the educational strategy proposed in this work can be replicated by those who want to develop other virtual laboratories.