Search

The potential of alkaline cellulo-xylanolytic enzymes from non-pathogenic Bacillus subtilis strain was tested for deinking of photocopier waste paper. Cellulase and xylanase play a crucial role in deinking of different types of waste paper. Partial purification of cellulo-xylanolytic enzymes was carried out using ultrafiltration followed by ammonium sulfate precipitation. The ultrafiltered enzyme was used for deinking the photocopier waste paper along with chemical deinking. An enzyme dose of 0.6 IU/g and reaction time of 60 min for ultrafiltered cellulo-xylanolytic enzyme significantly increased deinking efficiency, tear index (9.52%) and folding endurance (5±2%) as compared to chemical deinking. There was improvement in strength properties such as tear index and double-fold along with freeness of pulp (18%). There was slight decrease in tensile index (0.6%) and burst index (16%) while ISO brightness remained unaffected. Enzymatic deinking (74.3%) by ultrafiltered cellulo-xylanolytic from Bacillus subtilis was found significant over conventional chemical deinking.

Excellent mechanical and electrical properties of graphene-based paper-like materials are essential for applications in flexible conductors, energy-storage devices, etc. The graphene oxide (GO) supernatant separated by centrifugation and ultrasonication has been used to prepare graphene oxide paper and reduced graphene oxide paper (rGOP) with high strength and conductivity. However, this method has cumbersome steps and low supernatant concentration, which greatly increases time and energy consumption, and is not suitable for rapid batch preparation of high-strength and high-thickness rGOP. Herein, a high-speed mechanical shearing method has been used to efficiently exfoliate graphite oxide suspension into high-concentration GO slurry with large lateral size, and rGOP has been further prepared by blade coating and HI acid chemical reduction. Compared with the product prepared by ultrasonic exfoliation method, the average area of GO sheets obtained via the mechanical shear exfoliation method can reach around 16.31 μm2. As a result, the mechanical properties and conductivity of the prepared rGOP have been increased by 30% and 23.5%, respectively, with the tensile strength and electrical conductivity of 478.2 MPa and 208.4 S/cm being obtained. The developed method is of great significance for the large-scale production and emerging applications of lightweight and high-performance rGOP.

In order to obtain a lignin-based adsorbent with low cost, simple operation and no further modification, a calcium lignin adsorbent was prepared from chemical mechanical pulping (CMP) waste liquor by directly calcification from lime. The calcium lignin was characterized by BET, SEM, TEM, FT-IR and solid-state NMR analyses. The results showed that the molecular structure of the calcium lignin particles did not change when compared to sodium lignin, the formation mechanism of calcium lignin was revealed. The initial COD and lignin contents of CMP waste liquid were 54858 mg/L and 24.39 g/L, the conversion rate of lignin can reach 71.36% when was deal with lime. Thus, most of the lignin resources in the waste liquid were recovered. The middle-stage wastewater (MSWW) of pulping and papermaking was dealt with calcium lignin, the COD removal rate was up to 85.83%. The adsorption isotherms and kinetics were well fitted by the Langmuir model and pseudo-second-order kinetic model, respectively. Lime was regenerated from the used calcium lignin with high-temperature calcination, the conversion rate of calcium ions can reach 83.56%. Overall, the calcium lignin prepared by the one-step method exhibited great potential for effectively removing COD from middle-stage wastewater.

Virgin pulp is made by splitting up cellulose fibers from the woods by mechanical and chemical process without adding any recycled pulp content. The demand for trees, which are the basic raw material for making virgin pulp, increasing constantly in enormously growing paper manufacturing industry. The paper, which is made from virgin pulp is called as virgin paper and this is considered as better quality paper than the recycled paper. Now there is a need to increase the quality of recycled paper to equalize the quality of virgin paper, to reduce the demand for trees to make virgin pulp. In recycling, dispersive system is responsible for the de-inking process, which is one of the pulp purifying process which removes the printing ink from fibers. Chemicals are added in this deinking process which causes a serious problem by increasing the chemical concentration level of industrial outlet water. In conventional deinking technology, dispersive system is controlled by DCS which is quite complicated to control complex loop of operations. To overcome these problems, the dispersive system operations are controlled by PLC along with sensors which make the process easier and replacing the chemicals with enzymes will reduce the chemical concentration level of industrial outlet water and increases the quality of paper.

The efficiency of xylano-pectinolytic enzymes, co-produced by a single microbial strain Bacillus pumilus, was analysed for the recycling of mixed office waste paper through deinking and compared with the alkaline chemical deinking method. Enzymes showed maximum deinking at pH 8.5, pulp consistency of 10%, xylanase-pectinase dose of 12 and 4 IU per gram pulp, respectively, after 120 min of deinking period, and temperature at 50 °C. A chemi-enzymatic approach was employed with xylano-pectinolytic enzymes and various concentrations of deinking chemicals, which showed that enzyme-treated mixed office waste pulp requires only 40% chemicals for deinking, in order to get the almost same level of various handsheets properties, as obtained by the chemical method with 100% chemicals. Similarly, the effluent load of BOD and COD contents was also decreased by 17.90 and 19.75%. This combinational approach of deinking significantly improved the various properties of the handsheets and resulted in gain of 7.5, 9.38, 6.33 and 11.65% in tear factor, burst factor, breaking length and viscosity of the handsheets, while the effective residual ink concentration analysis of deinked handsheets of mixed office waste paper showed deinking efficiency of 22.45%, which revealed the removal of ink particles during enzymatic deinking steps.

Detecting the concentration of free chlorine is important for monitoring the quality of water. In this study, we report a nanohybrid paper-based chemiresistive sensor that can be used with smartphones to detect free chlorine ions. The sensor was fabricated using a simple and standardized coating process. The graphene and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) nanohybrid paper-based sensing device exhibited a more stable and intuitive response to free chlorine than that exhibited by the device using only PEDOT:PSS. The nanohybrid paper-based sensor was sensitive to free chlorine concentrations in a linear range of 0.1-500 ppm, and the limit of detection was 0.18 ppm. The sensor showed specificity for free chloride ions and detection capability in samples. The sensor was integrated as a module with an electric readout system, and the measured signals and results could be displayed in real time on a smartphone. Therefore, the proposed sensing platform is suitable owing to its portability, low cost, ease of use, and capability for on-site water quality measurement.

This study introduces a novel geotechnical composite material comprising two types of fill material sourced from the paper industry-deinking paper sludge ash (DPSA) and deinking paper sludge (DPS). Five composites with different DPSA and DPS contents were investigated. Two composites were selected for further analyses. The technology and procedure for composite installation were implemented in field tests. The composites with 80% and 70% DPSA exhibited the elasticity required to withstand minor landslide slip deformations, in addition to achieving sufficiently high values of uniaxial compressive strength. The composites had a low maximum dry density value, which led to fewer settlements in the entire support structure. The enhanced shear characteristics can enable the construction of a thinner retaining wall. The delay between preparation and installation of the composites was further investigated. The field tests confirmed that the composites with 80% and 70% DPSA can be installed on the construction site 4 h and even 24 h after mixing. In 2018, a retaining wall structure with 70% DPSA and 30% DPS was successfully implemented near a railway line using conventional technology as followed-up research to the herein presented study. Results have been derived from work performed in the scope of the H2020 Paperchain project in which novel circular economy models centered on the valorization of the waste streams generated by the pulp and paper industry as secondary raw material for several resource-intensive sectors, including the construction sector, have been developed. Environmental benefits are savings in natural raw materials, reduction of landfill disposal as well as CO2 emission reduction. Nasl. z nasl. zaslona. Opis vira z dne 16. 11. 2021. Št. članka 22363. Bibliografija: str. 12-13. Abstract.

The pulp and paper industry has a high potential to contribute to negative emissions through carbon capture and storage (CCS) applied to existing processes. However, there is a need to investigate how CCS solutions also can be combined with implementation of other emerging technologies in pulp and paper mills. This paper investigates the integration of a novel calcination process in two kraft mills and evaluates its potential combination with capture and storage of CO2 from the calcination plant. The alternative calcination process uses electric gas-plasma technology combined with steam slaking and allows replacing the conventional fuel-driven lime kilns with a process driven by electricity. The novel calcination process generates a pure, biogenic, CO2 stream, which provides an opportunity to achieve negative emissions at relatively lower costs. The potential reduction of greenhouse gas emissions when replacing the lime kiln with the plasma calcination concept depends strongly on the emissions intensity of grid electricity, and on whether fossil fuel or biomass was used as a fuel in the lime kiln. If fossil fuel is replaced and electricity is associated with very low emissions, avoided CO2 emissions reach ~50 kt/a for the smaller mill investigated in the paper (ca 400 kt pulp per year) and almost 100 kt/a for the larger mill (ca 700 kt pulp per year). Further emission reductions could then be achieved through CCS from the electrified calcination process, with capture potentials for the two mills of 95 and 164 kt/a, respectively, and capture and storage costs estimated to 36–60 EUR/tCO2.

The study is a first investigation of the feasibility to preserve recycled fillers (e.g. calcium carbonate, kaolin) from deinking paper sludge for newspaper production using an alternative approach respect to the actual methods. Deinking paper sludge was incinerated at 575 °C. The thermal stability of the incinerated sludge (ash) was evaluated by infrared analysis. Subsequently, the resulting ash was bleached by sodium dithionite. The particle size of the ashes was analysed by laser diffraction. The effect of recycled fillers on recycled paper pulp, after blending, was evaluated by the analysis of the physical and optical properties of the obtained paper sheets. Analysis showed the conservation of the calcium carbonate and other fillers’ molecular structure, both after incineration of the sludge and after bleaching. The dithionite treatment of the ashes resulted in ISO brightness levels of more than 70. The brightness was stable over one month. Paper sheets made by blending the bleached ashes with recycled paper showed an improvement of brightness and opacity but a decrease in terms of porosity and breaking length compared to paper sheets made without any filler. The proposed method still requires further studies to evaluate the economical application but offers an opportunity for the recycling of inorganic materials and valorisation of the sludge.

Paper has become the basic elixir in everyone's activities and usage of paper has increased day by day, the waste generated by paper is also enormous. The primary source of paper is wood (tree) yet, waste paper is environmentally good and biodegradable; however, it is the primary source of deforestation. Current research aims to find an alternate way to recycle paper in the biological approach. Hence in our work, twelve cellulose-producing bacteria were isolated, out of which one bacterial strain proved to be the best. Cellulase enzyme was extracted and purified, and used for enzymatic de-inking of photocopy papers. The optimal conditions for cellulase synthesis were at 60 °C, glucose as the only carbon source, and potassium nitrate as the nitrogen source. The enzyme demonstrated excellent de-inking at a lower pulp consistency of 3% with a 20% enzyme dose. The cellulose and hemicellulose levels decreased, which can be attributed to fiber breaking. Further, the changes in the functional groups identified by Fourier-transform infrared spectroscopy analysis and the changes in the surface morphology of the pulp fibers were obtained using scanning electron microscope analysis.

The recycling of waste paper has been an effective way to achieve the environmental-friendly growth of papermaking industry. Focusing on the mixed-pulping process which has been generally employed, to ensure the required properties of the deinking pulp (DIP) and minimize the purchase cost of waste paper, an intelligent model scheduling the mixing ratio of waste paper was developed in the study. Primarily, driven by the field data of mixing ratio of waste paper and DIP properties, the prediction models of DIP properties were developed by SVM, GA-SVM, and BP-NN algorithms. Subsequently, based on the best prediction model, the scheduling model for the mixing ratio of waste paper was set up by NSGAII algorithm. The experimental results showed that, based on the obtained best BP-NN prediction model of DIP properties, the developed NSGAII scheduling model for the ratio of waste paper could achieve excellent scheduling results under the rigorous constraints and multi-objective. Compared with the previous study, the developed prediction and scheduling models in this study reduced the purchase cost of waste paper by 2.16%, and improved the acceptable proportion of DIP property from 56.07% to 100%.

In this study, different methods for incorporating mixed or laminar copper microparticles (CuMPs) during papermaking were evaluated to determine the optimum paper-making process and correlate particle concentration and shape with antimicrobial activity. The addition of CuMPs during the disintegration of dry pulp stage was observed to produce a paper with uniformly distributed CuMPs, as determined through optical microscopy and UV–Vis spectroscopy analyses by measuring absorbance spectra in different areas of papers. Determination of two indices related to the concentration and distribution of copper will allow to predict the copper content in other papers. CuMP-paper samples were evaluated for structural, optical, and mechanical strength properties according to paper industry standards. Quantitative analyses by atomic absorption showed that between 24 and 39% of CuMPs were embedded in the paper fibre, independent of particle type. Finally, antibacterial activity analyses were performed according to ISO 20645 and ISO 20743. The results showed that papers with 0.30 g of incorporated CuMPs have antimicrobial activity, independent of particle morphology, with effects observed towards Gram (+) and Gram (−) bacteria and fungus. Furthermore, the evaluation of antimicrobial activity at different times of exposure to the microorganisms showed differences in effects that were dependent on the shape of the CuMPs incorporated into paper, where laminar particles exerted a sufficient effect, while no or a slight effect was observed for mixed CuMPs against Aspergillus niger.

The development of renewable energy sources minimizes the burning of fossil fuels for clean and green environment. Electrochemical energy storage/conversion device pays a way towards sustainable development that concludes an emerging field in the trends of the research community. Prominently, the functional materials with suitable structure and property determine the performance and durability of the devices. In recent times, graphene with its tremendous properties play a major role in electrochemical energy device applications. Meanwhile, the graphene-based electrodes were fabricated by various coating techniques on existing electrodes that utilized for energy device fabrication. Apart from these, it is also fabricated in a paper like a form (self-supported or free-standing) with its remarkable high conductivity, flexibility, robustness and electrochemical behavior which have been nominated for fabrication of flexible energy devices. Paper-like electrodes become an emerging field to fabricate a light-weight and flexible electronic devices for future prospects. Thus, we have summarized a synthetic strategy of graphene paper and its properties that potentially focused on flexible device fabrication in both the energy storage and conversion system. Hence, this review boosts up the forthcoming researchers to enhance the device performance with interrelating free-standing graphene and other host material.

The use of SERS for real-world bioanalytical applications represents a concrete opportunity, which, however, is being largely delayed by the inadequacy of existing substrates used to collect SERS spectra. In particular, the main bottleneck is their poor usability, as in the case of unsupported noble metal colloidal nanoparticles or because of the need for complex or highly specialized fabrication procedures, especially in view of a large-scale commercial diffusion. In this work, we introduce a graphene paper-supported plasmonic substrate for biodetection as obtained by a simple and rapid aerosol deposition patterning of silver nanowires. This substrate is compatible with the analysis of small (2 μL) analyte drops, providing stable SERS signals at sub-millimolar concentration and a detection limit down to the nanogram level in the case of hemoglobin. The presence of a graphene underlayer assures an even surface distribution of SERS hotspots with improved stability of the SERS signal, the collection of well-resolved and intense SERS spectra, and an ultra-flat and photostable SERS background in comparison with other popular disposable supports.

Objective: This study mainly focussed how foldscope can be used as an efficient viewable tool to detect in morphological and anatomical investigation of various bioactive medicinal plants. Microscope provides a beneficial instrument for visualization of living cells. Its cost is very high which is not affordable for rural based educational institutes. Foldscope is the ultra-affordable and versatile, paper microscope designed to be extremely portable, durable and to give optical quality similar to conventional research microscopes. Methods: For enhancing scientific temperament among rural children, Indian Born Scientist (Dr. Manu Prakash) has introduced an ultra-low-cost foldable origami-based approach for large-scale manufacturing of microscope, specifically demonstrating bright field, dark field and fluorescence microscopes. However, its potential as in research tool in the area of aromatic medicinal plants is still not known. The slides were prepared by own and were observed with the magnification power of 140X. Results: The result of the present study reported that the Foldcsope images revealed viable stained areas in the respective plant parts like trichomes, stomata, pollen grains, stem and leaf of different medicinal plants and indicating their live activities. Conclusion: Based on the attractive images captured from the Foldscope, the uses of foldscope were recommended to public. Previously we had organized some awareness cum demonstration programme regarding foldscope and its applications in the field of science education in the different educational institute of Erode District, Tamilnadu. Based on the clarity of images and easy handling of Foldscope the uses of origami microscope were recommended for higher studies.

The deinking of mixed office waste paper by cellulase, M/Las (modification of laccase aspartic acid system), and C-M/Las (cellulase synergistic modification of laccase aspartic acid system) was investigated. The fiber morphology parameters, hydrogen bond patterns, cellulose crystallinity, and fiber microstructure were observed via fiber quality analyzer (FQA), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscopy (SEM). The results showed that the effective residual ink concentration of enzyme deinked pulp decreased compared with blank pulp (pulp without enzymatic treatment). The deinking efficiencies of C-M/Las, cellulase, and M/Las were 18.17%, 14.01%, and 12.31%, respectively. FQA analysis indicated that the fiber length and curl index decreased, while the fiber width slightly increased. FTIR analysis revealed that after cellulase, M/Las, and C-M/Las treatment, the content of intermolecular hydrogen bonds increased by 14.65%, 13.37%, and 19.80%, respectively. This indicates that there is a synergistic effect between cellulase and M/Las. XRD showed that the cellulose crystallinity decreased after enzymatic deinking. SEM micrographs of fibers treated with enzymes revealed that the fiber surface became rough and more fibrils appeared. The water retention value was increased after enzymatic deinking.

Here we report the construction of CoFe2O4 coating on carbon fiber and the coated paper was used as the interlayer between the separator and cathode of Li-S batteries. The amorphous CoFe2O4 coating was deposited by the industry-oriented spray pyrolysis technique and carbon fiber was completely enwrapped by the coating. Compared to the non-coated carbon fiber, the coated carbon fiber as the interlayer exhibits a superior reversible capacity of 1086 mA h g−1 at moderate current of 0.1C and a low decay rate in the capacity of 0.043% per cycle after 1000 cycles at 1C. Excellent long-term cycling life and rate capacity were also achieved through the coated interlayer. The specially designed interlayer showed remarkable capability to trap effectively the intermediate LPS (lithium polysulfide). The significantly inhibited “shuttle effect” of LPS would give insight into designing and making the interlayer by using new coating materials for enhanced performances of the Li-S batteries.

Herein, a fully paper‐based all‐solid‐state supercapacitor with functionalized cellulose paper as electrodes, carboxymethyl cellulose gel as solid electrolyte and cellulose paper as separator was fabricated. The electrode was fabricated by a conventional papermaking process with silver‐modified fibers and graphene oxide (GO)‐modified fibers followed by reduction of GO. The Ag‐modified fibers and GO‐modified fibers were obtained by in situ growth of Ag nanoparticles and self‐assembly of GO sheets on cellulose fibers, respectively. Ag‐modified fibers act as a flexible current collector with rich three‐dimensional interconnected electron transport pathways to make the reduced GO‐modified fibers as electrode materials to achieve high conductivity (1.93 Ω sq−1) and high‐rate capability. Simple drying can reduce 40% weight of the supercapacitor to facilitate transportation and storage, and its capacitance efficiency can be recovered by wetting when needed. This work opens up a new way of developing cheap, green and high performance full‐paper flexible electronics by conventional papermaking process.