Search

Developing a knowledge of design and construction technology and engineering is often overlooked in favour of 'digital' technology such as tablets and computers. By taking children outdoors into nature, removing tablets and computers as well as artificial and synthetic materials and replacing them with only what nature provides, children become attuned to developing STEM knowledge through play with natural materials. This knowledge often develops through teacher support and at times by default, as children experience the constantly changing landscape of the natural environment. The development of children's understandings of 'nature's' technology and engineering provides an opportunity for further investigation of nature-based early childhood education and care settings. Through research conducted at four Australian bush kindergartens, this paper presents data from photographs, interviews and observations undertaken of twelve teachers and over one hundred and twenty children. It responds to the research question, how do early years learners develop their understanding of technology and engineering by engaging in nature-based learning? The research was undertaken using ethnography, a useful method in nature settings as the approach enables a deep understanding of how children develop their understandings of applying technology and engineering over time. The data demonstrate the benefits preschool children can gain from learning and being 'in' and 'with' nature and the important role bush kinders play in supporting children's technological and engineering literacy. Findings reveal that through their participation in bush kinder, children can develop technological and engineering knowledge.

Australia has a long-standing interest in fostering innovation capabilities to drive its future prosperity. However, it has only been in recent years that an emphasis on developing these capabilities has been formally extended into the classroom through the introduction of the Australian Curriculum Technologies. In 2017, the State Government of Victoria implemented its version of this national curriculum for the Technologies domain. For educators, this recent implementation could be considered problematic, for unlike the traditions of literacy and numeracy, methods to assist classroom teachers in diagnosing developmental indicators, for applied spatial problem-solving among children appears to be lacking in the Technologies area. Without such methods of diagnosis, it can be argued that teachers may struggle to develop appropriately targeted lessons, that demand of the student, the ability to comprehend applied spatial problem-solving, such as with hands-on engineering activities. Our research aims to investigate how a child's applied spatial inferential reasoning capabilities, vary by developmental age. To answer this question, we have adopted a two-stage process. Stage One involves a pilot study testing and refining the key research instruments. Stage Two incorporates the main study involving a larger number of participants. This paper summarises early insights from a mixed-method pilot study involving 15 students (9 boys, 6 girls) from Years 3-12. Students enrolled in this study undertook one of three hands-on problem-based engineering activities categorised as simple, complicated or complex; working in small groups of three. We noted that gender makeup of the group, and age levels of participating students appeared to be variables that impacted on organisation, communication and the solution produced. These preliminary observations assisted to refine the key indicators for observing students in preparation for the main study. Key interests in this study include the student's capacity for inference-making and abstraction with respect to spatial problem-solving. A review of the relevant literature and the need for further research in spatial reasoning is discussed.

This paper presents findings from an on-going international study of Early Childhood (EC) teachers' and children's use of Internet of Toys (IoToys) to understand possibilities for developing children's cognitive capacities (e.g., creativity, inquiry, engineering design thinking). The study employed a Design Based Research (DBR) method, where teachers intentionally plan and deliver technologically constructed Science Technology Engineering and Mathematics (STEM) experiences for preschoolers. Using Australia as a case study, data collection involved participant observation of three teachers' and 17 children's technology constructed play experiences with robotic toys, littleBits electronic magnetic blocks, alongside pre and post semi-structured interviews with teachers and children's photo voice sessions were video recorded. Analysing the findings using embodied cognition theory showed that the teachers, although novice in their own technological pedagogical knowledge engaged children's play with the robotic toys, and co-learn with the children. Integration of STEM-focused playful experiences supported children's scientific inquiry, design thinking and creativity as well as vocabulary targeted at interdisciplinary STEM concepts. With the ever increasing focus on developing children's 21st century skills, this study recommends engineering habits of mind, creativity and inquiry dispositions should now be taken into account in teaching and learning situations with young children and to develop STEM engagement.

This paper discusses how the COVID-19 pandemic can shift the conversation of paid and unpaid placements from an economic to a pedagogical and goodwill perspective. During the pandemic lockdown many placements were cancelled or postponed. Some continued as agreed but with students working from home, while other placements became unpaid. We build on the pertinent literature that raises legal, ethical, economic and pedagogical implications of paid versus unpaid placement models and what motivates placement organizations to offer placements. Four interdisciplinary trans-Tasman case studies are discussed to better understand the complex situations for placement organizations and universities to sustain WIL placements during this pandemic. Conclusions include recommendations to be vigilant and ensure goodwill is not used to mask the exploitation of students, but rather, positively influence the motivation behind offering placements during these trying times and beyond.

It is well documented that engineering practice is as much social as it is technical. Providing accurate course mapping and supporting teaching staff to scaffold engineering practice learning through whole of programme curriculum are key challenges. This study proposes a conceptual framework for engineering professional practice in an Australian context that is constructed through the triangulation of data collected from practitioner perspectives, literature, and reflection upon both authors' industry experiences. This employability skill development framework describes six key themes as graduate-level learning outcomes aligned to Australian accreditation requirements in a format that readily supports explicit inclusion of engineering professional practice in curriculum design. These key themes are illustrated along a continuum of personal, interpersonal, and contextual competencies and attitudes to communicate the interrelated nature of engineering employability skills. While this paper does not attempt to propose a universal framework, its potential broader relevance, future refinement, and evaluation are discussed.

Writing practices are seen to be essential for professional engineers, yet many engineering students and academics struggle with written communication, despite years of interventions to improve student writing. Much has been written about the importance of getting engineering students to write, but there has been a little investigation of engineering academics' perceptions of writing practices in the curriculum, and the extent to which these practices are visible to their students and to the academics. This paper draws on research from an ongoing study into the invisibility of writing practices in the engineering curriculum using a practice architectures lens. The paper uses examples from the sites of practice of two participants in the study to argue that prevailing practices in engineering education constrain more than enable the development and practice of writing in the engineering curriculum.

This position paper sets out to examine value creation in the engineering enterprise, a process that has mostly been associated with innovation and entrepreneurs. An analysis of the literature on engineering value creation in business studies, engineering and engineering education publications shows that there has been surprisingly little empirical study and thus the means by which most engineers contribute value is unclear in the literature. Analysis of published data and data from studies by the authors in engineering workplaces in Australia, South East Asia and Portugal suggests that the work performed by most engineers has little to do with innovation. Based on these data the authors identify 14 ways in which engineers create value. An important finding is that routine engineering performances by a majority of engineers, not associated with innovation or entrepreneurial activities, not only can be shown to create value, but also to protect accumulated value from inadvertent destruction. The paper outlines the educational implications of these findings and proposes measures that engineering educators can adopt to improve the understanding of engineering graduates about engineering value creation.

Research on engineering practice is scarce and sharing of qualitative research data can reduce the effort required for an aspiring researcher to obtain enough data from engineering workplaces to draw generalizable conclusions, both qualitative and quantitative. This paper describes how a large shareable qualitative data set on engineering practices was accumulated from 350 interviews and 12 field studies performed by the principal investigator and by students conducting PhD and capstone research projects. Ethical research practice required that sharing and reuse of qualitative data be considered from the start. The researchers' interests and methods were aligned to maintain sufficient consistency to support subsequent analysis and re-analysis of data. Analysis helped to answer questions of fundamental significance for engineering educators: what do engineers do, and why are the performances of engineering enterprises so different in South Asia compared with similar enterprises in Australia? Analysis also demonstrated the overwhelming significance of technical collaboration in engineering practice. Conceiving engineering practice as a series of technical collaboration performances requires a more elaborate understanding of social interactions than is currently the case in engineering schools. Another finding is that global engineering competency could be better described in terms of "working with people who collaborate differently". Research helped to demonstrate that formal treatment of technical collaboration in an engineering curriculum could help avoid student misconceptions about engineering practice that hinder their subsequent engineering performances.

This paper asks the question: do people with different levels of research productivity and identification as a researcher think of research differently? It discusses a study that differentiated levels of research productivity among English and Australian academics working in research-intensive environments in three broad discipline areas: science, engineering and technology; social science and humanities; and medicine and health sciences. The paper explores the different conceptions of research held by these academics in terms of their levels of research productivity, their levels of research training, whether they considered themselves an active researcher and a member of a research team, and their disciplinary differences.

With the increasing challenges facing professional engineers working in more complex, global and interdisciplinary contexts, different approaches to understanding how engineers practice and learn are necessary. This paper draws on recent research in the social sciences from the field of workplace learning, to suggest that a practice-theory perspective on engineers' professional learning is fruitful. It shifts the focus from the attributes of the individual learner (knowledge, skills and attitudes) to the attributes of the practice (interactions, materiality, opportunities and challenges). Learning is thus more than the technical "acquisition" and "transfer" of knowledge, but a complex bundle of activities, that is, social, material, embodied and emerging. The paper is illustrated with examples from a research study of the learning of experienced engineers in the construction industry to demonstrate common practices--site walks and design review meetings--in which learning takes place.

Laboratories are generally regarded as critical to engineering education, and yet educational institutions face significant challenges in developing and maintaining high-quality laboratory facilities. Remote laboratories are increasingly being explored as a partial solution to this challenge, with research showing that--for the right learning outcomes--they can be viable adjuncts or alternatives to conventional hands-on laboratories. One consequential opportunity arising from the inherent support for distributed access is the possibility of cross-institutional shared facilities. While both technical feasibility and pedagogic implications of remote laboratories have been well studied within the literature, the organisational and logistical issues associated with shared facilities have received limited consideration. This paper uses an existing national-scale laboratory sharing initiative, along with a related survey and laboratory sharing data, to analyse a range of factors that can affect engagement in laboratory sharing. The paper also discusses the implications for supporting ongoing laboratory sharing.

The field of research (FoR) that an academic participates in is both a manifestation of, and a contributor to the development of their identity. When an academic changes that FoR the question then arises as to how they reconcile this change with their identity. This paper uses the identity-trajectory framework to analyse the discourse of 19 engineering academics in relation to their educational research. The findings reveal insights into the identity changes experienced in the transition from typical engineering academic to engineering education researcher. Participants' responses illustrate how various aspects of their research activities contribute to the development of the networking and intellectual strands of their academic identity as engineering education researchers, and the effect of their university environment on this development. Conference participation was found to be an important contributor to progression of the intellectual and networking strands of identity-trajectory for researchers at all stages of development, although for different reasons.

The Faculty of Engineering in an Australian university collaborated with a central academic/educational development unit to design and deliver a teaching development program for all engineering teaching assistants (TAs). This paper discusses the approach taken to promote inclusive education in engineering in a situation with competing priorities. One of the strategies employed in the program aimed at enhancing the TAs' awareness of the diversity of learning styles and abilities within their student cohort with particular reference to students with a learning disability or a mental health condition. Research (Mortimore, 2003) has shown that certain learning styles can be characteristic of a learning disability or mental health condition. A standard learning styles inventory tool was introduced so TAs could identify their own preferences and realize the learning environment can be "disabling" when there is a mismatch between a learning preference and teaching style. Through discussions and activities, TAs developed inclusive teaching strategies which could facilitate learning for all students. The program provided opportunities to discuss other issues related to diversity among students and other members of the university community, and effective communication skills. Changes in the attitude of the engineering TAs and faculty towards this program are discussed.

Little has been published in the Australian vocational education and training (VET) literature on the topic of pre-apprenticeships, which are a loose type of preparatory courses for apprenticeships available in some trades. Nevertheless, pre-apprenticeships have been in existence for several decades. With continuing concern over skill shortages in Australia, the research study on which this paper is based investigated the role of pre-apprenticeship courses in addressing skill shortages in the electrotechnology, automotive and engineering trades, some of the largest "traditional trades" in Australia, and those with sizeable numbers in pre-apprenticeships. The principal objective of the overall study was to determine whether the use of pre-apprenticeships increased the size and suitability of the supply of entrants to the traditional apprenticeships and whether pre-apprenticeships do or might increase completion rates in apprenticeships. The paper uses findings from the study to develop a typology of pre-apprenticeship courses, proposing two fundamental orientations and discussing whether different orientations towards pre-apprenticeships are compatible with one another. (Contains 3 tables and 2 notes.)

This paper describes the use of robotics in an Early Years classroom as a tool to aid the development of technological skills in a creative environment rich with literacy and numeracy opportunities. The pilot project illustrates how a three-phase process can result in the development of: (1) emergent literacy and numeracy, (2) digital access for disadvantaged Early Years learners and (3) basic engineering concepts. The pilot study was conducted with a class of 16 students aged between 5 years and 6 months to 7 years, over a 6-week period. During this period, the students were introduced to and engaged in the creation of robots and simple machines via the use of a commercial robotics package. The pilot was designed around three distinct phases: modelling, exploring and evaluating. These phases provided scaffolding for the students to engage with the technology and for the class teacher to develop her own skills. The use of this particular robotics package is unique to Australia, unique to Early Years, and links hands-on, fine-motor development with 21st century learning. The researchers and authors of this paper are currently based at the Australian Catholic University and are involved with projects involving creative, digital technologies, children in the early years of formal schooling, emerging literacy and numeracy for diverse Early Years learners and the development of Science, Technology, Engineering and Mathematics (STEM) subjects. (Contains 3 tables.)

This case study trialled the introduction of a student-response system (Top Hat) in a third-year engineering Fluid Mechanics course (n = 44) to improve student engagement, motivation and cognition. It was recognised that for the potential benefits of student-response systems (SRSs) to be fully realised, more time must be allocated for student engagement and the active learning components of the course. In order to allow sufficient time to fully engage with the SRSs and other classroom activities, traditional lectures were revised and the classroom format was flipped. This paper presents the initial case study results focusing on the use of SRSs. Overall, the new flipped lecture and SRS teaching format demonstrated a substantial increase in the level of student engagement, motivation, active learning and attendance compared to previous cohorts. However, the increased levels of engagement did not appear to reflect on any large increase in students' individual grades.

University science outreach programmes are used to encourage more school students to select science, technology, engineering, and mathematics (STEM) subjects in further education and pursue science-related careers. The benefits of science outreach programmes are often espoused from the perspective of programme participants. Little attention, however, is given to what university students delivering the programmes gain from the experience. This paper seeks to illustrate the benefits of engineering students delivering STEM outreach programmes in schools. It reports on a qualitative case study of the experiences of two STEM Education and Outreach team members from a regional university in Australia. Content analysis of interview data highlighted not only the participants' motivations and perceived benefits of being involved in the STEM programme but also revealed the skills and attributes honed throughout the experience. Involvement in the STEM outreach programme resulted in the development of social and personal responsibility generic graduate attribute skills, evidenced through their motivations to be involved, the demonstration of understanding of teaching and learning, and application of science communication skills. This study demonstrates that designing and delivering STEM outreach programmes assists in the development of skills that will be beneficial when pursuing careers in engineering in the future.

Making the students understand the theoretical concepts of digital logic design concepts is one of the major issues faced by the academics, therefore the teachers have tried different techniques to link the theoretical information to the practical knowledge. Use of software simulations is a technique for learning and practice that can be applied to many different disciplines. Experimentation of different computer hardware components/integrated circuits with the use of the simulators enhances the student learning. The simulators can be rather simplistic or quite complex. This paper reports our evaluation of different simulators available for use in the higher education institutions. We also provide the experience of incorporating some selected tools in teaching introductory courses in computer systems. We justified the effectiveness of incorporating the simulators into the computer system courses by use of student survey and final grade results.

Purpose: The purpose of this paper is to show how industrial ecology can facilitate the achievement of sustainable development through its incorporation into an engineering curriculum. Design/methodology/approach: A model has been developed for assessing sustainability learning outcomes due to the incorporation of the concept of industrial ecology into undergraduate and postgraduate engineering programs. This model assesses how the Engineering Faculty at Curtin University has included a core engineering unit (Engineering for Sustainable Development) and four postgraduate units (Cleaner Production Tools, Eco-efficiency, Industrial Ecology and Sustainable Technology) in its undergraduate and postgraduate engineering program, to enable modern engineering education to reflect the benefits of industrial ecology in the implementation of sustainable engineering solutions and decision-making processes. Using this model, this paper demonstrates how the syllabus, interdisciplinary and multidisciplinary assignment tasks, lectures and tutorials have been developed since 2006 in order to develop the concept of industrial ecology in undergraduate and postgraduate engineering education. The paper has also analysed the different teaching methods that have been applied since 2006 to generate increased student satisfaction in these new and challenging subjects. Findings: The university environment can temper the potential outcomes from increasing the sustainability content in engineering education, given the general lack of student maturity in understanding the value of sustainability objectives together with course limitations on sustainability content and the arduous and lengthy processes involved in changing course curricula. Research limitations/implications: Since the Engineering for Sustainable Development unit has been introduced only recently, it was beyond the scope of the research to interview graduate engineers who completed this unit to investigate how they have applied the concept of industrial ecology to achieve sustainability outcomes in their workplaces. Originality/value: This research is distinct in that it investigated the implications of the incorporation of industrial ecology into the engineering curriculum. (Contains 1 note, 1 table, and 2 figures.)

This paper presents data from a project that aims to determine the level of knowledge and understanding of engineering students about sustainable development (SD). The data derive from a survey completed by final year engineering students in three Irish Higher Education Institutions. This paper is part of a larger study that examines the relationship between students' and teachers' understanding of SD. The results from the survey show that final year engineering students' knowledge is deficient. The majority of the participants fail to acknowledge the complexity of the concept and focus on environmental protection. Their knowledge of legislation relevant to SD and the social aspect of sustainability is particularly deficient. (Contains 3 tables and 3 figures.)

This paper reports on the role of the current student experience questionnaire in gaining student views on their educational experiences while studying at a research-intensive university in Australia. In particular, the paper focuses on the experiences of engineering students. The paper goes on to examine the areas of best practice and those identified for improvement by students. A number of areas identified by engineering students as needing improvement fall within the teaching dimension; in particular, issues relating to feedback to students and clarity of explanation. Finally, the paper outlines some of the actions that have been taken by the university and the Faculty of Engineering based on the results. (Contains 2 tables and 1 figure.)

Product design is the convergence point for engineering and design thinking and practices. Until recently, product design has been taught either as a component of mechanical engineering or as a subject within design schools but increasingly there is global recognition of the need for greater synergies between industrial design and engineering training. Product design engineering (PDE) is a new interdisciplinary programme combining the strengths of the industrial design and engineering. This paper examines the emergence of PDE in an environment of critique of conventional engineering education and exemplifies the current spread of programmes endorsing a hybrid programme of design and engineering skills. The paper exemplifies PDE with the analysis of the programme offered at Swinburne University of Technology (Australia), showing how the teaching of "designerly" thinking to engineers produces a new graduate particularly suited to the current and future environment of produce design practice. The paper concludes with reflections on the significance of this innovative curriculum model for the field of product design and for engineering design in general. (Contains 5 figures.)

Research on student-learning outcomes indicates that university graduates do not possess important skills required by employers, such as communication, decision-making, problem-solving, leadership, emotional intelligence, social ethics skills as well as the ability to work with people of different backgrounds. Today, engineering graduates are required to work within multicultural and multinational workplace environments, and thus need to possess adequate professional attributes and competencies. This paper elaborates on the missing links between engineering graduate attributes and employers' expectations. It further investigates whether the attributes gained by engineering graduates from Monash University, Australia, meet the expected needs of the industry. The paper also proposes a 3-D Competency Model to address the potential shortfalls of employers' expectations in that regard. (Contains 2 tables and 2 figures.)

Purpose: As a way of focusing curriculum development and learning outcomes universities have introduced graduate attributes, which their students should develop during their degree course. Some of these attributes are discipline-specific, others are generic to all professions. The development of these attributes can be promoted by the careful use of self- and peer assessment. The authors have previously reported using the self- and peer assessment software tool SPARK in various contexts to facilitate opportunities to practice, develop, assess and provide feedback on these attributes. This research and that of the other developers identified the need to extend the features of SPARK, to increase its flexibility and capacity to provide feedback. This paper seeks to report the results of the initial trials to investigate the potential of these new features to improve learning outcomes. Design/methodology/approach: The paper reviews some of the key literature with regard to self- and peer assessment, discusses the main aspects of the original online self- and peer assessment tool SPARK and the new version SPARK[superscript PLUS], reports and analyses the results of a series of student surveys to investigate whether the new features and applications of the tool have improved the learning outcomes in a large multi-disciplinary Engineering Design subject. Findings: It was found that using self- and peer assessment in conjunction with collaborative peer learning activities increased the benefits to students and improved engagement. Furthermore it was found that the new features available in SPARK[superscript PLUS] facilitated efficient implementation of additional self- and peer assessment processes (assessment of individual work and benchmarking exercises) and improved learning outcomes. The trials demonstrated that the tool assisted in improving students' engagement with and learning from peer learning exercises, the collection and distribution of feedback and helping them to identify their individual strengths and weaknesses. Practical implications: SPARK[superscript PLUS] facilitates the efficient management of self- and peer assessment processes even in large classes, allowing assessments to be run multiple times a semester without an excessive burden for the coordinating academic. While SPARK[superscript PLUS] has enormous potential to provide significant benefits to both students and academics, it is necessary to caution that, although a powerful tool, its successful use requires thoughtful and reflective application combined with good assessment design. Originality/value: It was found that the new features available in SPARK[superscript PLUS] efficiently facilitated the development of new self- and peer assessment processes (assessment of individual work and benchmarking exercises) and improved learning outcomes. (Contains 10 figures and 1 table.)

The attribute focus in engineering education now adopted by the engineering education accrediting bodies of the US, UK and Australia is based on meeting the assumed needs of professional practice. It is associated with an increasing expectation by employers of work-ready graduates rather than relying on subsequent work-based learning and experience to develop many of the essential professional practice attributes. Yet the scope of the mechanical engineering profession is broad and views of practitioners contributing to debate on attribute requirements are largely influenced by their own often unique professional formation. In addition, the formative development of the profession in Australia has been significantly influenced by 19th and 20th century UK and US practices, although historically the industrial profile of Australia has been strikingly different. An analysis of current industry distribution of Australian, UK and US mechanical engineers presented in this paper shows continuing, although less marked, differences. To develop a clearer perception of the profession in Australia, its educational formation, and operational environment, this paper provides a concise study of the formative development of the profession, and presents a breakdown of the industry sectors in which they are currently employed. The effects of momentous global changes in engineering employment and formation over recent decades are also discussed. Recent changes in engineering employment have included major structural changes to organisations, accelerating technical and educational developments and mounting societal expectations making it imperative that attributes be attuned to the new engineering paradigm as increasing demands are placed on our graduates. This paper provides an essential foundation for ongoing debate and analysis of attribute needs related to this broadly based engineering discipline. Although presented from an Australian perspective, many issues discussed are applicable worldwide. (Contains 2 tables.)

Metaphors can be powerful teaching and learning tools which may help us to understand novel, complex or abstract concepts using familiar language and thought structures. Academics routinely use metaphors in their university teaching to explain new or difficult ideas to students. In this article the authors argue that tertiary teachers' metaphors for sustainability warrant formal investigation, as they will likely influence the construction and delivery of sustainability curricula. Based on this contention, we conducted in-depth interviews with eight Australian engineering academics which centred around the question "What do you mean by sustainability?". From the interview transcripts, we explicated and described four distinctly different metaphors. These were: sustainability as weaving, sustainability as guarding, sustainability as trading, and sustainability as observing limits. We describe each of the metaphors in detail and speculate on some of the underlying assumptions which underpin them. In conclusion, we advance the idea that sustainability might be taught using an explicit multiplicity of metaphors and that each metaphor would express important aspects of the phenomenon of sustainability. This approach would capitalise on the diversity of existing metaphors in the academe, and could result in curricula which reflect the richness and depth that a variety of perspectives can bring to understanding a complex, abstract, flexible concept like sustainability.

Purpose: While a number of universities in Australia have embraced concepts such as project/problem-based learning and design of innovative learning environments for engineering education, there has been a lack of national guidance on including sustainability as a "critical literacy" into all engineering streams. This paper was presented at the 2004 International Conference on Engineering Education in Sustainable Development (EESD) in Barcelona, Spain, outlining a current initiative that is seeking to address the "critical literacy" dilemma. Design/methodology/approach: The paper presents the positive steps taken by Australia's peak engineering body, the Institution of Engineers Australia (EA), in considering accreditation requirements for university engineering courses and its responsibility to ensure the inclusion of sustainability education material. It then describes a current initiative called the "Engineering Sustainable Solutions Program--Critical Literacies for Engineers Portfolio" (ESSP-CL), which is being developed by The Natural Edge Project (TNEP) in partnership with EA and Unesco. Findings: Content for the module was gathered from around the world, drawing on research from the publication The Natural Advantage of Nations: Business Opportunities, Innovation, and Governance in the Twenty-first Century. Parts of the first draft of the ESSP-CL have been trialled at Griffith University, Queensland, Australia with first year environmental engineering students, in May 2004. Further trials are now proceeding with a number of other universities and organisations nationally and internationally. Practical implications: It is intended that ESSP-CL will be a valuable resource to universities, professional development activities or other education facilities nationally and internationally. Originality/value: This paper fulfils an identified information/resources need. (Contains 4 figures, 14 notes and 1 table.)

Integrating sustainability into an undergraduate engineering program at the University of Technology, Sydney has been a challenging project. The authors of this paper have been participant observers of the integration process. In this paper, they have attempted an analysis of that process, focussing on the dynamics of the network of people and interests, which have shaped the process. Actor network theory was used to provide an analytical framework for the analysis. The interests and experiences of the authors in the process necessarily influence the analysis. All three authors have been active in positioning sustainability as a central theme for the critique and practice of engineering. Paul Bryce and Stephen Johnston have had long-standing involvement in technology transfer projects in development. Both have published on engineering as a social activity, critiquing the undue emphasis in engineering education on engineering science, at the expense of attention to engineering practice. Their experience and scholarship have given credibility to their efforts in the faculty to press for a new paradigm of engineering practice. Keiko Yasukawa is an educational developer in the faculty who has been working with staff and students to help them reflect on their idea of what engineering is about in their teaching and learning. She has taken a leading role in shaping the new curriculum.

Purpose: This paper aims to investigate barriers to employee participation in voluntary formal training and development opportunities from the perspective of employees in small engineering businesses. Design/methodology/approach: An exploratory qualitative methodology involving data collection via site visits and in-depth semi-structured interviews with 20 employees in five small engineering businesses was used. Interviews explored the role of developmental proactivity and employees' perceptions of conditions in the immediate work environment and industry sector that represent barriers to their participation in formal training and development. Interview transcripts were analysed using thematic analysis. Findings: Three key findings are as follows. First, proactive behaviour regarding access to external training and development is muted in small business settings because of strong resource allocation norms. Second, factors in the internal work environment rather than the industry sector constitute the major barriers to training and development. Third, owner-managers and employees appear to have significantly differing perspectives of barriers to training and development. Research limitations/implications: The findings suggest avenues for future research. These include examining how workplace norms influence employee behaviour with regard to accessing formal training and development and investigating the learning strategies that employees use to compensate for a lack of access to training and development. Originality/value: Research into relatively low levels of employee participation in formal training and development in small businesses is deficient because it predominantly involves surveys of owner-managers' opinions. This study is novel because it seeks to generate new insights not previously articulated by employees. The study yielded four propositions that have practical and research implications.

This paper reports on the outcomes of a three-year study investigating the use of digital technologies to increase the authenticity of high-stakes summative assessment in four Western Australian senior secondary courses. The study involved 82 teachers and 1015 students and a range of digital forms of assessment using computer-based exams, digital portfolios and audiovisual recordings. The results were analysed using a feasibility framework concerning manageability, technical facility, functional operation and pedagogic alignment. By the end of the study, each form of assessment that was implemented was found to be feasible once some obstacles were overcome. Two methods of marking were tried, analytical rubric-based marking and holistic comparative pairs marking, with the latter found to generate more reliable scores. With the increased use of digital technologies in schools and the expectation that children will achieve more complex performances, more use of digital forms of assessment will be required.

Argues on ontological grounds against the idea that technology is simply applied science. The premise of the argument is that technology can also be considered a necessary precursor to scientific knowledge. Contains 19 references. (DDR)

Argues that the relationship between science and technology is complex and that technology is not simply applied science. The premise of the argument is that technology can also be considered a necessary precursor to scientific knowledge. Contains 24 references. (DDR)

The phenomenon of women's underrepresentation in engineering is well known. However, the slow progress in achieving better gender equality here compared with other domains has accentuated the "numbers" issue, while the quality aspects have been largely ignored. This study aims to shed light on both these aspects via the lens of mentors, who are at the coalface of guiding female engineers through their education and subsequent careers. Based on data collected from 25 mentors (8 men and 17 women from 8 countries), the paper explores their experiences of being mentors, as well as their views on recommended actions for nurturing female engineers. The findings reveal that the primary motivation for becoming a mentor was personal for men and women. Many mentors from countries with relatively lower female labour participation rates perceive their roles as guarantors of their mentees' successful future career paths, and a similar trend can be found in mentors in academia. The study underscores the need for invigorating mentors' roles in order to secure a more equitable future for engineering education.

Engineering academic units might engage with social media for a range of purposes including for general communication with students, staff, alumni, other important stakeholders and the wider community at large; for student recruitment and for marketing and promotion more generally. This paper presents an investigation into the use of Twitter by six engineering academic units internationally, using publicly available Twitter data over an 18-month period for analysis and visualization, to characterize the engagement by engineering academic units with one popular social media tool. Widely varying levels of activity were observed, from essentially undirected "Megaphone" Tweeting, through to sustained and complex interactions with multiple external accounts. This work provides insights into how engineering academic units are using Twitter and how they might more effectively use the platform to achieve their individual objectives for institutional social media communications and marketing, and offers a methodology for future research.

Incorporating engineering concepts into middle school curriculum is seen as an effective way to improve students' problem-solving skills. A selection of findings is reported from a science, technology, engineering and mathematics (STEM)-based unit in which students in the second year (grade 8) of a three-year longitudinal study explored engineering concepts and principles pertaining to the functioning of simple machines. The culminating activity, the focus of this paper, required the students to design, construct, test, and evaluate a trebuchet catapult. We consider findings from one of the schools, a co-educational school, where we traced the design process developments of four student groups from two classes. The students' descriptions and explanations of the simple machines used in their catapult design are examined, together with how they rated various aspects of their engineering designs. Included in the findings are students' understanding of how their simple machines were simulated by the resources supplied and how the machines interacted in forming a complex machine. An ability to link physical materials with abstract concepts and an awareness of design constraints on their constructions were apparent, although a desire to create a ''perfect'' catapult despite limitations in the physical materials rather than a prototype for testing concepts was evident. Feedback from teacher interviews added further insights into the students' developments as well as the teachers' professional learning. An evolving framework for introducing engineering education in the pre-secondary years is proposed.

Project-based learning (PBL) is a well-known student-centred methodology for engineering design education. The methodology claims to offer a number of educational benefits. This paper evaluates the student perceptions of the initial and second offering of a first-year design unit at Griffith University in Australia. It builds on an earlier evaluation conducted after the initial offering of the unit. It considers the implementation of the recommended changes. Evaluations of the two offerings reveal that students (in both the initial and second offering) generally enjoyed the experience, but that the second offering was found to be a significantly more enjoyable learning experience. Students in the second offering also reported a significantly better understanding of what they needed to do for the design projects and where to find the requisite information. The oral presentation aspect of the initial and second offerings received the lowest satisfaction rating. The inclusion (and delivery) of the computer-aided drawing component of the unit is seen as a positive aspect by some students, but many others comment on it negatively. The best aspects of the PBL unit and those aspects needing further improvement were similar to the findings of other investigations documented in the literature. (Contains 4 tables and 1 figure.)

Internationally, the railway industry is facing a severe shortage of engineers with high-level, relevant, professional and technical knowledge and abilities, in particular amongst engineers involved in the design, construction and maintenance of railway infrastructure. A unique graduate level programme has been created to meet that global need via a fully online, distance education format. The development and operation of this Master of Engineering degree is proposed as a model of the process needed for industry-relevance, flexible delivery, international networking and professional development required for a successful graduate engineering programme in the twenty-first century. In particular, this paper demonstrates how a mix of new and more familiar technologies are utilised through a variety of tasks to overcome the huge distances and multiple time zones that separate the participants across a growing number of countries, successfully achieving close and sustained interaction amongst the participants and railway experts. (Contains 4 figures.)

Project-based learning (PBL) is a well-known methodology for engineering design education due to a number of benefits it is claimed to offer. This paper presents the initial offering of a first-year engineering PBL unit at Griffith University in Australia. An evaluation of student perceptions of the unit revealed that students generally enjoyed the experience, with the oral presentation aspect receiving the lowest satisfaction rating. There was no significant difference in the ratings between any demographic grouping, suggesting that all students were able to participate in, and experience, the unit in essentially the same way. The best aspects of the unit and those aspects needing improvement were similar to the findings of other investigations documented in the literature. It is proposed that future offerings of the unit will reduce the number of design projects from three to two per semester and will attempt more sophisticated individualisation of marks for group work activities. (Contains 4 tables.)

This paper presents the strategies used for effective teaching and skill development in integrated circuit (IC) design using project-based learning (PBL) methodologies. It presents the contexts in which these strategies are applied to IC design courses at the University of South Australia, Adelaide, Australia, and the National Institute of Applied Science (INSA), Toulouse, France. Collaborations among the faculty members of the two institutions have produced a set of learning resources and design tools to support the development of industry-relevant design skills and lifelong learning skills. At the pedagogical level, the emphasis is on the development of practical circuit design, critical thinking, and problem-solving skills rather than the mastery of complex circuit design tools. The courses enable students to learn about the most recent technological developments and their implications, using a set of user-friendly tools. The PBL methodologies, intuitive design tools, and latest technology models have consistently produced high levels of student satisfaction with the overall quality of the courses at the two institutions. (Contains 25 figures and 3 tables.)

Over the past few years many universities worldwide have introduced a common first year for all engineering disciplines. This is despite the opinion of many academics that large classes have negative effects on the learning outcomes of first year students. The University of South Australia is also faced with low motivation amongst engineering students studying non-major courses. In 2006, a project-based laboratory was successfully introduced for first year students enrolled in electrical disciplines, which increased student satisfaction, reduced the attrition rate and improved students' success rate. This paper presents the experiences with the project-based laboratory's implementation in three different projects in the common first year course, Electrical and Energy Systems, where each project aims to increase the motivation of students in one of three disciplines: electrical, mechanical or civil engineering. (Contains 1 table and 8 figures.)

This paper puts forward the view that engineering educators have a responsibility to prepare graduates for engineering work and careers. The current literature reveals gaps between the competencies required for engineering work and those developed in engineering education. Generic competencies feature in these competency gaps. Literature suggests that improving the development of generic competencies in engineering graduates has met with barriers. One identified problem is that a relatively low status is assigned to generic competencies in engineering education. This review focuses on competencies that are required by professional engineers across all engineering disciplines, in Australia, Europe, New Zealand, and the USA. The literature suggests that engineering educators should focus on developing "generic engineering competencies" rather than separate generic competencies and engineering competencies. A method, developed at the University of Western Australia for identifying the generic engineering competencies required by engineers graduating in Australia, is outlined.

The paper starts by emphasising that final year engineering projects are regarded important in the training and education of professional engineers in Australia and Europe. The sources of projects available to students were also mentioned. Some Australian universities insist on individual projects but some not, each with their own reasons. However, it can be argued that all European universities run individual projects. In most cases, whether it is in Australia or Europe, the total load for final year engineering projects is about 6.25% of the load of engineering programmes. Assessment methods were also described. They were all different whether in Australia or Europe but not very significant. It was discovered that literature reviews, oral presentations and written reports or dissertations were important elements in the assessment schemes. Many university staff, in both continents, encouraged students to publish their work in international conferences and journals if the originality of the projects was high. It can be argued that the individual project is most effective in learning outcome; however, the cost involved is also very high and its sustainability in smaller universities in Australia is in doubt. (Contains 8 tables.)

This paper reports the integration of supplementary training in academic literacy, for those without the assumed entry standard, into a standard electrical engineering program without compromising any other educational objectives. All students who commenced an engineering degree were tested as part of their first session's assessment activities. Those identified as having inadequate academic literacy were directed to study a specifically designed credit-bearing course, which is controlled by the Engineering Faculty but was designed and is taught in collaboration with academic literacy teachers. Students who completed this course responded positively and also demonstrated measurable improvement in their communication skills. The approach has alleviated the skepticism about teaching academic literacy usually found amongst engineering faculty staff and has been adopted by the wider Engineering Faculty. (Contains 3 tables and 1 figure.)

Remote and virtual laboratory classes are an increasingly prevalent alternative to traditional hands-on laboratory experiences. One of the key issues with these modes of access is the provision of adequate audiovisual (AV) feedback to the user, which can be a complicated and resource-intensive challenge. This paper reports on a comparison of two studies of remote and virtual access to hardware, one with rich AV feedback and one without. The comparison shows that the learning outcomes of the remote access mode are dependent upon the richness of the feedback; the learning outcomes of the simulated access mode are largely robust to an absence of feedback. The students' preferences are affected by the feedback, with a clear preference for richer feedback. (Contains 4 tables and 14 figures.)

This paper describes a project undertaken by the school outreach team at the School of Engineering, University of Tasmania, Australia, to attract girls to science, engineering and technology (SET). The project was a pilot program designed to engage female students from upper primary to senior secondary in the teaching of physical sciences. A pre-project survey revealed girls preferred working in small groups, they preferred learning through practical activities, technology was reported as artefact and they preferred learning about biological or environmental sciences. Based on this information the outreach team devised a program that provided schools with hands-on resource kits, provided professional learning for science teachers, connected schools with professional female engineer mentors, and encouraged girls to participate in extra-curricular SET activities and competitions. The outcomes of the year-long project are discussed and recommendations are made for further research.

Women's low enrolment in post-school engineering degrees continues to be a problem for engineering faculties and the profession generally. A qualitative interview-based study of Australian women engineers across the range of engineering disciplines showed the relevance of success in math and science at school to their enrolling in engineering at university. However, for a significant number of the women the positive self-image connected with school success was not maintained by their workplace experience. Using a mixed methods approach, further investigations of the attitudes and experiences of working engineers at three large firms suggest that engineering workplaces continue to be uneasy environments for professional women. Particular issues for women working as professional engineers are identified in this paper and some educational strategies are suggested in order to better prepare engineers for an inclusive and participatory professional life. (Contains 2 tables.)