Search

Plug-in hybrid electric buses (PHEBs), compared with traditional fuel-driven vehicles, can achieve higher fuel economy and lower pollution emissions. For a PHEB with a single-shaft parallel powertrain, a major challenge for researchers is to find approximate optimal energy management strategies that can run in real time. Motivated by this idea, this paper aims at minimizing PHEB fuel consumption with a temporal-difference (TD) learning method. First, historical driving cycle data from real-world bus routes are collected and processed and parameter variables of TD are introduced. Specially, this process is completed offline. Then, the configuration and main parameters of PHEB are presented, and a control-oriented dynamic system of the PHEB is constructed. Thereafter, the TD learning method based on historical data is introduced. Furthermore, the approximate optimal control strategy for energy management is proposed. Compared with the traditional optimal control strategy, the proposed method can realize real-time running without sacrificing the accuracy of optimization, because the learning method updates the estimates based on other learned estimates without calculating a final outcome. This method can learn directly from the data of running PHEBs without a simplified model of the PHEB, which can avoid the influence of model error. Finally, to verify this method, several different strategies are used for comparison. In addition, experimental results in real-world driving cycles demonstrate that the proposed method can improve the fuel economy obviously by up to 21% compared with a traditional charge-deleting, charge-sustaining scenario. Therefore, this novel method has great potential in realistic applications. [ABSTRACT FROM AUTHOR]

Driving cycles and road slope are two important factors affecting fuel saving performance of plug-in hybrid electric buses (PHEBs) in Chinese cities. Moreover, onboard auxiliary equipment (e.g., Global Position System receiver and General Packet Radio Service (GPRS) wireless module) of PHEB may provide potential means to communicate with the control center of the bus company, allowing for driving cycle prediction through data communication between foregoing buses and the control center. With this general approach in mind, and by utilizing driving data clustering and driving cycle classifier, this paper presents a multimode switched logic control strategy, targeting fuel economy improvement of the PHEB team for a particular city bus route. First, the normal feature parameters are extracted from the sampled driving history cycles, and the composed feature parameters are given by a mapping of normal feature parameters in this approach. A novel improved hierarchical clustering algorithm is applied for driving cycles' data clustering into four groups. Then, on the basis of the clustering results, support vector machine method is used to predict the current driving cycle. Finally, a switched driving controller is presented according to current type of driving cycle and slope information. Simulation results are compared with those of traditional methods in the given real-world driving cycles of city bus, showing significant improvement, which may offer a theoretical solution with engineering application. Experimental results also demonstrate that the proposed control approach is feasible in the tested bus routes. [ABSTRACT FROM PUBLISHER]

The series-parallel architecture of the plug-in hybrid electric powertrain has attracted wide attentions in recent years for its flexible and highly efficient operating modes. However, despite the improvement of the vehicle fuel economy, it has been gradually facing more challenges on the design of the optimal controller due to the complex structure and the fast depletion of the battery. In this paper, a two-step optimal energy management strategy is proposed for a novel single-shaft series-parallel powertrain. In the first step, an equivalent method is adopted, in which two motors are equivalently regarded as one. After detailed analysis of the operating modes, various objective functions are established to pre-optimize the power split between engine and motor or two motors. In the second step, a stochastic dynamic programming (SDP) is adopted to optimize the power split between the engine and the equivalent motor, and the optimal combination of the operating modes. Then coupled with the pre-optimized results of the first step, the optimal power split among the engine and two motors could be obtained and then constructed as simple lookup-tables, which have great potential for practical applications. Finally, the preliminary test about the real-time performance of the optimal results is developed on the hardware-in-the-loop (HIL) system. [ABSTRACT FROM AUTHOR]

Taking the complex but regular characteristics of bus routines into account, the stochastic dynamic programming (SDP) might be a method with more potential to optimize the energy management of a plug-in hybrid electric bus (PHEB). However, the discrete transmission system and the continuous power system make it a complicated multidimensional optimal problem, particularly for PHEB with automated mechanical transmission (AMT), and the optimal decisions, which are obtained based on historical data, might not always well satisfy the driver's expectation to vehicle maneuverability under various driving conditions. To solve these problems, an adaptive approach based on the SDP is proposed in this paper. Exhaustively, the SDP is propelled into the input of the transmission to only optimize the torque split under the special gearshift logic, which reduces the dimensions of optimization and obtains more applicable optimal sequences. Then, an adaptive factor, which trades off the vehicle fuel economy and drivability in real time by dynamically adjusting the gearshift points and the torque split, is developed for the variation of the complicated bus driving cycles. The simulation results demonstrate that the proposed method could well respond to the variations of the driving conditions (e.g., road grade and vehicle load). Furthermore, the performance of the proposed method is discussed in detail by comparisons with different control strategies. More importantly, the proposed approach has great potential to be applied in practice. [ABSTRACT FROM PUBLISHER]

Considering the complicated characteristics of traffic flow in city bus route and the nonlinear vehicle dynamics, optimal energy management integrated with clustering and recognition of driving conditions in plug-in hybrid electric bus is still a challenging problem. Motivated by this issue, this paper presents an innovative energy optimization control framework based on the cloud computing for plug-in hybrid electric bus. This framework, which includes offline part and online part, can realize the driving conditions clustering in offline part, and the energy management in online part. In offline part, utilizing the operating data transferred from a bus to the remote monitoring center, K-means algorithm is adopted to cluster the driving conditions, and then Markov probability transfer matrixes are generated to predict the possible operating demand of the bus driver. Next in online part, the current driving condition is real-time identified by a well-trained support vector machine, and Markov chains-based driving behaviors are accordingly selected. With the stochastic inputs, stochastic receding horizon control method is adopted to obtain the optimized energy management of hybrid powertrain. Simulations and hardware-in-loop test are carried out with the real-world city bus route, and the results show that the presented strategy could greatly improve the vehicle fuel economy, and as the traffic flow data feedback increases, the fuel consumption of every plug-in hybrid electric bus running in a specific bus route tends to be a stable minimum. [ABSTRACT FROM AUTHOR]