Search

Shared public buildings have become centers of innovation, integrating advanced technologies to meet evolving societal needs. With a heightened emphasis on occupants' health and well-being, these buildings serve as hubs for technological convergence, facilitating seamless connectivity and intelligent data analysis and management. Within this context, environmental monitoring emerges as a foundational element, pivotal to all aspects of building management. This article provides findings from the nationally funded RE-START project, which focuses on shared public buildings, with special regard to educational and medical facilities. The project explores enhanced indoor air quality monitoring, focusing on CO2 concentration that is directly correlated with occupancy, as a fundamental element for developing health and safety protocols, energy efficiency strategies, the integration of smart building technologies, and data-driven energy management. The intersection of environmental monitoring, energy efficiency, security, and IoT technologies in in indoor spaces is relevant. The outcomes of the study reveal the delicate nature of all the involved components, which need to be carefully developed in an integrated manner. [ABSTRACT FROM AUTHOR]

This paper discusses the use of advanced monitoring techniques for optimal control of building management systems (BMS) in public buildings, with the objective of guaranteeing the appropriate air quality, minimizing energy consumption. The paper reviews the current state of BMS technologies, and the challenges associated with reducing energy consumption in public buildings. It then discusses the potential benefits of advanced monitoring techniques and their application in BMS, including improved energy efficiency, occupant comfort, and indoor air quality. The analysis conducted highlights the challenges in establishing a direct relationship between monitoring data and HVAC system control, emphasizing the potential of Machine Learning algorithms in addressing this issue. [ABSTRACT FROM AUTHOR]

The paper provides results from a hardware-in-the-loop experimental campaign on the operation of an air-source heat pump (HP) for heating a reference dwelling in Pisa, Italy. The system performances suffer from typical oversizing of heat emission devices and high water-supply temperature, resulting in HP inefficiencies, frequent on-off cycles, and relevant thermal losses on the hydronic loop. An experimentally validated HP model under different supply temperatures and part-load conditions is used to simulate the installation of a thermal storage between heat generator and emitters, in both series and parallel arrangements. Results relative to a typical residential apartment show that the presence of the thermal storage in series configuration ensures smoother heat pump operation and energy performance improvement. The number of daily on-off cycles can be reduced from 40 to 10, also saving one-third of electric energy with the same building loads. Preliminary guidelines are proposed for correctly sizing the tank in relation to the HP capacity and the average daily heating load of the building. A storage volume of about 70 L for each kilowatt of nominal heating capacity is suggested. [ABSTRACT FROM AUTHOR]

Flat-plate solar collectors are one of the cleanest and most efficient heating systems available. Studies on the presence of covalently functionalized graphene (Gr) suspended in distilled water as operating fluids inside an indoor flat-plate solar collector (FPSC) were experimentally and theoretically performed. These examinations were conducted under different testing conditions namely 0.025 wt.%, 0.05 wt.%, 0.075 wt.%, and 0.1 wt.%, 0.5, 1, and 1.5 kg/min, 30, 40, and 50 °C, and 500, 750, and 1000 W/m2. Various techniques were used to characterize the functionalized nanofluids' stability and morphological properties namely UV/Vis spectrophotometry, EDX analysis with a Scanning Electron Microscope (SEM), zeta potential, and nanoparticle size. The results showed that the collected heat improved as the percentage of GrNPs and the fluid mass flow rates increased, although it decreased as the reduced temperature coefficient increased, whereas the maximum increase in collector efficiency at higher concentration was 13% and 12.5% compared with distilled water at 0.025 kg/s. Finally, a new correlation was developed for the base fluid and nanofluids' thermal efficiency as a function of dropped temperature parameter and weight concentration with 2.758% and 4.232% maximum deviations. [ABSTRACT FROM AUTHOR]

Worldwide increasing awareness of energy sustainability issues has been the main driver in developing the concepts of (Nearly) Zero Energy Buildings, where the reduced energy consumptions are (nearly) fully covered by power locally generated by renewable sources. At the same time, recent advances in Internet of Things technologies are among the main enablers of Smart Homes and Buildings. The transition of conventional buildings into active environments that process, elaborate and react to online measured environmental quantities is being accelerated by the aspects related to COVID-19, most notably in terms of air exchange and the monitoring of the density of occupants. In this paper, we address the problem of maximizing the energy efficiency and comfort perceived by occupants, defined in terms of thermal comfort, visual comfort and air quality. The case study of the University of Pisa is considered as a practical example to show preliminary results of the aggregation of environmental data. [ABSTRACT FROM AUTHOR]

Energy efficiency, indoor environmental quality, and comfort in public buildings has received increasing attention in recent years as it can contribute to maintaining safety conditions and to the reduction of conventional fuels consumption, energy costs for building owners, and greenhouse gas emissions. People are an integral part of any building energetic ecosystem as, according to some estimates, they spend a great part of their life in indoor spaces. On one side, occupants are responsible for the energy consumption of the building and for this reason the "psychology of energy saving" has received attention since the 70s up to recent results. On the other hand, strategies for energy efficiency should not jeopardize occupants' health and quality of life. While general awareness of the value of environmental variables has increased in the last few years, this interest has recently been further exacerbated by the spreading of the well-known COVID-19 pandemic. In fact, as most countries have started planning post-lock-down activities, there is a growing concern regarding how social distancing measures can be enforced in shared buildings and strict indoor air quality control can prevent airborne virus transmission in crowded spaces. The paper discusses the perspectives of increasing the level of social interaction of building users through the systematic use of Information and Communication Technologies (ICT), and in particular, some specific platforms. The ICT system, taking information from the occupants in a concerted way, can be an important instrument to collect data, coming both from physical sensors and from people to develop a multi-objective control strategy for the Heating, Ventilation, and Air Cooling (HVAC) systems in order to obtain energy savings whilst balancing user comfort and healthy conditions. [ABSTRACT FROM AUTHOR]

Air ventilation rate plays a relevant role in maintaining adequate indoor air quality (IAQ) conditions in public buildings. In general, high ventilation rates ensure good indoor air quality but entail relevant energy consumption. Considering the necessity of balancing IAQ and energy consumption, a correlation between the number of occupants obtained from analysis of CO2 concentration variation is presented as a general element for controlling the operation of heating ventilation and air cooling (HVAC) systems. The specific CO2 exhalation rate is estimated using experimental data in some real conditions in university classrooms. A method for the definition of optimal values of air exchange rate is defined, highlighting that the obtained values are much lower than those defined in current technical standards with possibilities of relevant reduction of the total energy consumption. [ABSTRACT FROM AUTHOR]