Search

This study is focused on the feasibility of using energy performance contracting (EPC) for the retrofit of two apartment buildings constructed using precast concrete technologies in Slovakia decades ago. The retrofit packages were defined, and their suitability for EPC was evaluated through discounted payback. The uncertainties in the profitability calculations were covered by designing five possible economic developments and defining input ranges instead of just single inputs. The measures in the technical systems were shown to be more feasible than the retrofit of the building envelopes. The potential to finance the selected measures for technical systems through EPC was further evaluated. It was shown that, for at least one of the two buildings studied, the EPC was recommended only for the economic developments with a notable increase in energy prices compared to the baseline that referred to the situation before the Covid-19 pandemic. In the best case, the payback was four years for one building and seven years for the other; thus, both were potentially suitable for EPC. However, for a complex retrofit, the EPC must be combined with a different funding source to also finance other retrofit measures. [ABSTRACT FROM AUTHOR]

A current trend is to reduce the energy performance of buildings by using alternative sources for heating and cooling. One of the most promising, and so far unprecedented sources of heating and cooling, is the use of energy from the earth using the thermally-activated foundation piles of a building, the so-called energy piles. The paper deals with an overview and comparison of computer-aided analytical models of energy piles. The individual analytical models are compared (categorized) from the point of view of their physical complexity, computational costs, and thus their usability for the purpose of optimizing energy-pile equipment or assessing the long-term energy efficiency of an energy pile field. Selected mathematical models were algorithmized, and the results obtained were compared with a more robust numerical solution performed using CalA 4 software. [ABSTRACT FROM AUTHOR]

[Display omitted] • Water-based wall systems for heating and cooling and thermal barriers are reviewed. • A classification scheme is proposed for heating/cooling systems and thermal barriers. • Benefits and drawbacks are summarized, design recommendations are provided. • Alternating between heating, cooling, and thermal barrier is perspective operation strategy. • Incorporating PCM in the wall and use in building retrofit are research opportunities. This study reviews water-based wall systems for space heating and cooling and thermal barriers (TB) for the reduction of buildings' thermal load. The review gives a general overview of the research and groups it into subtopics that are discussed in detail. For space heating and cooling, the subtopics entail thermal performance, thermal comfort, renewable energy sources, use for building retrofit, and combination with phase change materials (PCM). For TB, especially the working principle, types and designs, and performance are discussed. A classification system is proposed separately for wall heating and cooling systems and TB based on the designs found in scientific literature. Benefits and drawbacks are summarized, and design recommendations are provided for the wall systems. It was shown that in certain cases, radiant wall systems can be preferable to radiant floors and ceilings, but further comparisons would be useful to provide conclusive evidence. For TB, the studies uniformly declare that TB reduce buildings' thermal loads and energy demands. Few studies focused on the economic and environmental aspects of using TB. Most of the studies about TB are based on calculations. Measurements to quantify the benefits of TB under real operation and refine the conditions under which various types of TB are feasible are lacking. Enhancing the wall performance by PCM in the active layer, application of the wall systems in building retrofit, and alternating between the functions of heating, cooling, and TB present the biggest research opportunities and challenges. [ABSTRACT FROM AUTHOR]