Search

International audience; This paper presents a global thermal model of the energy conversion of the 10 kW el Eurodish dish/Stirling unit erected at the CNRS-PROMES laboratory in Odeillo. Using optical measurements made by DLR, the losses by parabola reflectivity and spillage are calculated. A nodal method is used to calculate the heat losses in the cavity by conduction, convection, reflection and thermal radiation. A thermodynamic analysis of a SOLO Stirling 161 engine is made. The Stirling engine is divided in 32 control-volumes and equations of ideal gas, mass and energy conservation are written for each control-volume. The differential equation system is resolved by an iterative method developed using Matlab TM programming environment. Temperature, mass, density of working gas, heat transfers and the mechanical power are calculated for one Stirling engine cycle of 40 ms and for a constant direct normal irradiation (DNI). The model gives consistent results correctly fitting with experimental measurements.

The CNRS-Promes dish∕Stirling system was erected in Jun. 2004 as the last of three country reference units built in the “Envirodish” project. It represents the latest development step of the EuroDish system with many improved components. With a measured peak of 11kW electrical output power, it is also the best performing system so far. The measurement campaign to determine the optical and thermodynamic efficiency of the system is presented. The optical quality of the concentrator and the energy input to the power conversion unit was measured with a classical flux-mapping system using a Lambertian target and a charge coupled device camera system. An efficiency of the concentrator including the intercept losses of 74.4% could be defined for this particular system. For the thermodynamic analysis all the data necessary for a complete energy balance around the Stirling engine were measured or approximated by calculations. For the given ambient conditions during the tests, a Stirling engine efficiency of 39.4% could be measured. The overall efficiency for the conversion of solar to electric energy was 22.5%.