Search

One way to minimize emissions of greenhouse gases that contribute to climate change is to reduce the use of wood as the main material for pulp and paper production. Therefore, nonwoody plants such as bamboo can be alternatives as raw materials for pulp and paper. This study aims to determine the effect of the different bamboo species and age on the bamboo pulping yield and bamboo mechanical paper properties. Bambusa vulgaris, Gigantochloa levis, and Gigantochloa scortechinii bamboo species or locally known as Aur, Beting, and Semantan bamboo at the age of 1, 3, and 5-year old, were pulped using Soda-Anthraquinone (AQ) pulping. No beating process was conducted to all the papermaking processes to evaluate the basic mechanical properties of the bamboo paper. Pulping yield ranged from 35.7 to 51.7% at different bamboo species and age, with the pulping conditions at 20% of NaOH, 170°C pulping temperature, 90 min time to reach pulping temperature and 90 min time at pulping temperature, 1:6 of bamboo to liquor ratio and 0.1% of AQ based on bamboo oven-dried weight. The paper was made according to TAPPI Standard T205 sp-95. The paper mechanical properties for burst index, tear index, tensile index, and folding endurance ranged from 1.32 to 2.36 kPa.m²/g, 7.48 to 14.9 Nm2/g, 16.02 to 29.68 Nm/g, and 2 to 28 double folds, respectively, at different bamboo species and age. It was found that Beting bamboo has the potential to be a viable raw material for pulp and paper products as it shows the highest mechanical properties compared to Aur and Semantan. [ABSTRACT FROM AUTHOR]

Highlights • Non-invasive multi-analytical approach for characterizing Japanese papers. • SPME-GC/MS provides information on the organic substances emitted by papers and fibers. • Acetic acid and 1-butanol emission are related to the papermaking process. • N-N dimethyl formammide was emitted exclusively by industrial papers. Ketones, aldehydes and heavier alcohol were preferentially emitted by fibers and homemade papers. • Higher furfural emission from fibers place further question about the use of this compound for evaluating degradation of the paper. Abstract Volatile organic compounds (VOCs) can have a strong effect on cellulose degradation, contributing in decreasing the lifetime expectancy of the paper materials, widely employed in the field of conservation. In this work, we investigated several industrial and homemade Japanese papers, as well as fibers, evaluating VOCs emission by using solid-phase micro extraction coupled with gas chromatography–mass spectrometry (SPME-GC/MS). Acetic acid and 1-butanol were highly detected in industrial and homemade papers rather than fibers, suggesting that the emission of these compounds is influenced by the production process more than by the raw material itself. Conversely, N-N dimethyl formammide was peculiar of industrial processes. Ketones, aldehydes and heavier alcohols were preferentially emitted by fibers and homemade papers. The higher emission of furfural from fibers rather than on papers place new questions about the use of this compound to evaluate the degradation state of the paper material that should be carefully evaluated. [ABSTRACT FROM AUTHOR]

Summary: Despite major improvements in recycling over the last decades, the pulp and paper sector is a significant contributor to global greenhouse gas emissions and other environmental pressures. Further reduction of virgin material requirements and environmental impacts requires a detailed understanding of the global material flows in paper production and consumption. This study constructs a Sankey diagram of global material flows in the paper life cycle, from primary inputs to end‐of‐life waste treatment, based on a review of publicly available data. It then analyzes potential improvements in material flows and discusses recycling and material efficiency metrics. The article argues that the use of the collection rate as a recycling metric does not directly stimulate avoidance of virgin inputs and associated impacts. An alternative metric compares paper for recycling (recovered paper) with total fibrous inputs and indicates that the current rate is at just over half of the technical potential. Material efficiency metrics are found to be more useful if they relate to the reuse potential of wastes. The material balance developed in this research provides a solid basis for further study of global sustainable production and consumption of paper. The conclusions on recycling and efficiency should be considered for improving environmental assessment and stimulating a shift toward resource efficiency and the circular economy. [ABSTRACT FROM AUTHOR]

The aim of this work is to compare the environmental impacts of two production processes of tissue paper using virgin pulp (virgin fiber) or waste paper pulp (recycled fiber). This comparison is based on the materials and energy used as well as emissions and waste resulting from the production of tissue paper. Life cycle assessment (LCA), ReCiPe method, was chosen as the analysis tool. The results of the research proved that electricity has the most considerable participation in the overall environmental impacts in both production processes, followed by either virgin pulp or heat. Consequently, these two production processes are the greatest contributors to the following midpoint environmental impact categories: human toxicity, climate change, human health and ecosystems, and fossil depletion. The analysis based on endpoint impact categories proved that the production process based on waste paper is more environmentally friendly than the one based on virgin pulp in all impact categories: human health, ecosystems, resources. This is largely because of its lower material and energy requirements in the entire life cycle. Due to the fact that the tissue paper is the final use of fiber, using recycled waste paper is strongly recommended. The obtained research results are a valuable source of management information for the decision makers at both company and national levels required to improve the environmental performance of tissue paper production. [ABSTRACT FROM AUTHOR]

Abstract To reduce pollution emissions and achieve a cleaner production in paper industry, it is essential to understand the inner links between concentrations of gaseous pollutants, types of final products and production techniques. In this study, the concentrations of four potential gaseous pollutants, total volatile organic compounds (TVOC), formaldehyde (HCHO), hydrogen sulfide (H 2 S), and hydrocarbon compounds (C x H y), in the ambient air on thirty sampling points of five pulp and paper mills were detected and analyzed. The results were summarized with respect to the following aspects: (1) Levels of four gaseous pollutants on all the sampling points in five mills. It was obvious that the situation of gaseous pollution from pulp mill was much more serious than those from paper mills. (2) Gaseous pollutant distinctions due to different production processes. The levels of gaseous pollutants from five mills were greatly influenced by the utilized raw materials and the applied paper chemical agents (flavor, coating materials and additives) in mills. (3) Gaseous pollution comparisons at common points. At the two common points in five mills, i.e. the wet end of paper machine and the wastewater treatment process, TVOC and HCHO, C x H y and H 2 S were the main gaseous pollutants, respectively. In addition, some feasible measures to realize a cleaner production in pulping and papermaking process were also put forward in the article. Highlights • We analyze the levels of 4 gaseous pollutants on 30 sites of 5 pulp & paper mills. • Gaseous pollution distinctions due to different production processes are studied. • Feasible measures to realize the cleaner production in the processes are suggested. • Gaseous pollution are greatly affected by raw materials and added paper chemicals. [ABSTRACT FROM AUTHOR]

Abstract Using waste paper as fuel for domestic heating is a beneficial recycling option for small island developing states where there are lacks of resources for energy and waste treatment. However, there are concerns about the impact of air pollutants emitted from the burning of the self-made paper briquettes as household air pollution is recognised as the greatest environmental risk for human. In this study, combustion tests were carried out for paper briquettes made in one Pacific island and three commercial fuels in Australia including wood briquettes, kindling firewood and coal briquettes in order to: 1) characterise the emissions of three criteria air pollutants including particulate matters, CO and NO x including their emission factors (EF) from the tested fuels; and 2) compare the EFs among the tested fuels and with others reported in the literature. The results showed that waste paper briquettes burned quickly and generated high temperature but the heat value is relatively low. Paper briquettes and coal briquettes produced higher CO concentration than the others while paper briquettes generated the highest NO x level. Only PM 2.5 concentration emitted from paper briquettes was similar to kindling firewood and lower than wood briquettes. Burning of paper briquettes and wood briquettes produced particulate matter with large average count median diameter (72 and 68 nm) than coal briquette and kindling firewood (45 and 51 nm). The EFs for CO, NO x and PM 2.5 of paper briquettes were within the range of EFs reported in this study as well as in the literature. Overall, the results suggested that using paper briquettes as fuel for domestic heating will not likely to generate higher level of three major air pollutants compared to other traditional fuels. Highlights • The first attempt to report emission of key air pollutants from waste paper briquettes. • Burning of paper briquettes emitted relatively high CO and NO x concentration. • Burning of paper briquettes emitted PM with large average particle size. • Waste paper could be recycled as briquettes for domestic use like other common fuels. [ABSTRACT FROM AUTHOR]

Historically, the pulp and paper industry has been a cornerstone of Maine's economy, but it is also a major generator of pollution to the state's air and waterways. The industry has been in decline for several decades, with the most recent period of economic turmoil taking place in the aftermath of the Great Recession. According to the U.S. Environmental Protection Agency, pulp and paper manufacturing is among the top sources of the release of toxic chemicals. Hence, one might expect that as the sector declines, the by‐production of toxic pollution from pulp and paper mills would also decline. However, a comparison of the mills' releases of seven major toxic chemicals in the year immediately before—2010—and the year immediately after—2016—the latest round of mill closures, shows that the absolute quantities of industrial releases of some toxic chemicals remained steady or increased over the amounts released in the precrisis period. More encouragingly, in the latter period, a greater portion of releases of toxic chemicals were managed in ways other than direct discharge to air and water. [ABSTRACT FROM AUTHOR]

Purpose The aim of this work is to quantify the greenhouse gas (GHG) emissions savings potential in magazine paper production through the application of the innovative manufacturing strategies using advanced sheet structure design and fibre modifications. Methods The study applies Life Cycle Assessment (LCA) methodology to two different magazine paper products: supercalendered (SC) paper and light-weight coated (LWC) paper. A cradle-to-gate approach is used aiming to assess the environmental benefits gained through the implementation of new manufacturing strategies in both products. The functional unit of the system was defined as the production of one square meter of finished paper for printing magazines. Conventional and new production processes have been compared. Results and discussion The strategies applied to SC paper resulted in reduction of GHG emissions by 22.9%, with a total of 10.7 gCO 2 eq emissions saved per square meter of SC paper. In the case of LWC paper, GHG emissions are reduced by 20.3%, which are equal to a total of 19.7 gCO 2 eq saved per square meter of LWC paper. The influence of certain methodological approaches -functional unit, electricity mix and avoided impacts- in the final results is also discussed in the paper. Conclusions The manufacturing strategies implemented show a remarkable potential for reducing GHG emissions. Taking into account that the pulp and paper industry is a very energy-intensive sector and one of the main GHG emitters, the potential of the strategies for the improvement of the environmental performance of the papermaking processes is significant. [ABSTRACT FROM AUTHOR]

There has been controversy regarding the air pollutants emitted from sources closely related to the activities of daily life in China, such as cooking, setting off fireworks, sacrificial incense and joss paper burning, and barbecue (which have been named the five missing sources – FMSs), and the extent to which they impact the outdoor air quality. To date, due to the lack of both an activity dataset and emission factors, there have been no estimations of the emission of air pollutants from FMSs. In this work, we have attempted to combine questionnaire data, various statistical data, and data on points of interest to obtain a relatively complete set of activity data. The emission factors (EFs) of carbonaceous aerosols were tested in our lab. Emission inventories of carbonaceous aerosols with a high spatial–temporal resolution for FMSs were then established, and the spatial variation trend and driving forces were discussed. From 2000 to 2018, organic carbon (OC) emissions were in the range of 4268–4919 t. OC emissions from FMSs were between 1.5 ‰ and 2.2 ‰ of the total emissions in China. Black carbon (BC), elemental carbon (EC), and brown carbon (BrC) absorption cross-section (ACS BrC) emissions from FMSs were in the ranges of 22.6–43.9 t, 213–324 t, and 14.7–35.6 Gm 2 , respectively. Their emissions tended to be concentrated in certain periods and areas. The OC emission intensities in central urban areas were 3.85–50.5 times those in rural areas (due to the high density of human activity), while the ACS BrC emissions in rural regions accounted for 63.0–79.5 % of the total emissions (resulting from uncontrolled fireworks). A mass of fireworks led to much higher ACS BrC and EC emissions on Chinese New Year's Eve, with respective values that were 1444 and 262 times their corresponding yearly averages. Significant (p<0.01) correlations between the population's income and pollutant emissions were also found: these correlations were positive (r=0.94) and negative (r=-0.94) for urban and rural regions, respectively, indicating the necessity to regulate residents' lifestyles and increase residents' income in respective urban and rural regions. This study provides firsthand data to identify emissions, variation trends, and impacting factors from the FMSs. This is helpful for modeling works on air quality, the climate effect, and human health risks during specific periods or in specific regions as well as for modifying emission control policies. The data compiled in this work can found at 10.6084/m9.figshare.19999991.v2 (Cheng et al., 2022). [ABSTRACT FROM AUTHOR]

By employing historical case study methodology, this paper examines the transition towards renewable energy and increased energy efficiency in the Swedish pulp and paper industry (PPI) during the 1970s and 1980s. Between 1973 and 1990, CO emissions were cut by 80 % in this sector, and this was mainly achieved by substituting away from oil to biofuels in the form of by-products from the pulp manufacturing process. The CO reduction was also a result of energy efficiency improvements and increased internal production of electricity through back-pressure turbine power generation. Sweden was highly dependent on oil at the advent of the first Oil Crisis in 1973, and the increased oil prices put pressure on the Swedish government and the energy-intensive PPI to reduce this oil dependency. Of central importance for the energy transition was the highly collaborative strategy of the PPI, both internally among pulp mills as well as between the sector as a whole and the corporatist Swedish state administration. The Swedish government chose a proactive strategy by emphasizing knowledge management and collaboration with the industry along with the substitution of internal biofuels for oil. The transition was also characterized by a strong focus on unutilized potentials in the PPI; a previous waste problem now could be transformed into energy savings and improved energy efficiency. Energy taxes and fees also played an important role in Swedish energy policy during the 1970s and the 1980s. All in all, the study illustrates the central role of governments and their ability to push industrial sectors into new technological pathways through a wide palette of mutually reinforcing policy instruments. The results further point at the importance of a more holistic understanding of the interplay between different policies and their impacts in the longer run. [ABSTRACT FROM AUTHOR]

Sulfur dioxide (SO2) and oxides of nitrogen (NOx) emissions from U.S. pulp and paper mills have been estimated from industry-wide surveys conducted every five years, beginning in 1980 and continuing through 2010. Between 1980 and 2010, total SO2 emissions declined by over 70%, while paper and paperboard production rose 35%. NOx emissions peaked in 1995, but fell by almost 40% over the next 15 years. Paper and paperboard production only declined 7% over the same period. These downward emission trends resulted from several factors, including reductions in oil and coal use, declining oil and coal sulfur content, increased use of add-on SO2 and NOx control systems on boilers, growing use of combustion modification techniques to minimize emissions, improvements in energy efficiency, and declining pulp, paper, and paperboard production over the past 15 years. [ABSTRACT FROM AUTHOR]

This study estimated paper and paperboard demand, pulpwood demand, and carbon dioxide (CO2) emissions from production of paper and paperboard through 2050 in ten Asian countries. Under scenarios of varying population, gross domestic product (GDP), and per capita paper and paperboard demand, we analyzed the relationship between economic growth and consumption of paper and paperboard. We also evaluated options to reduce CO2 emissions through increased use of black liquor, waste paper pulping, and wood chemical pulping, as well as improvements in pulp, paper, and paperboard production technology. The quadratic curve model (inverted U) for per capita consumption of paper and paperboard against per capita GDP resulted in significant regression coefficients and higher adjusted R2 values than linear and logarithmic curve models for all uses of paper and paperboard. The estimated paper and paperboard demand in the ten countries in 2050 ranged from 112% (328%) to 156% (454%) of total 2005 consumption for the world (for the ten Asian countries). Of this estimated paper and paperboard demand, China accounted for about 50% and India 20%. The estimated pulpwood demand in these ten countries in 2050 ranged from 13% (48%) to 21% (84%) of global (ten country) 2005 wood supply potential. The introduction or increase of the use of black liquor, waste paper pulping, the combination of wood chemical pulping and black liquor, and technological improvements produced CO2 reductions of 24%, 5%, 32%, and 25%, respectively, compared to 2050 emission levels in the no-measure (unadjusted) option, assuming sustainable forest management. [ABSTRACT FROM AUTHOR]

The paper industry''s climate change gas emissions are growing. This article considers how to reduce emissions from cut-size office paper by bypassing stages in its life cycle. The options considered are: incineration, which cuts out landfill; localisation, which cuts out transport; annual fibre, which cuts out forestry and reduces pulping; fibre recycling, which cuts out landfill, forestry and pulping; un-printing, which cuts out all stages except printing; electronic-paper, which cuts out all stages. Un-printing may offer the greatest climate change emission reduction. There are uncertainties in this result, particularly in estimating the proportion of waste office paper would be suitable for un-printing. [Copyright &y& Elsevier]

There has been controversy about the air pollutants emitted from sources closely related to people's daily life (such as cooking, fireworks burning, sacrificial incenses and joss paper burning, and barbecue, named as five missing sources, FMS) impacting the outdoor air quality to what extent. Till now, there is no emission estimation of air pollutants from FMS, as the missing of both activity dataset and emission factors. We attempted to combine the questionnaire data, various statistical data, and data of points of interest to obtain a relatively complete set of activity data. The emission factors (EFs) of carbonaceous aerosols were tested in our lab. Then, the emission inventories of carbonaceous aerosol with the high spatial-temporal resolution for FMS were established firstly, and the spatial-variation trend and driving forces were discussed. From 2000 to 2018, organic carbon (OC) increased from 4268 t to 4919 t. The OC emission from FMS was 1.48-2.18 - of its total emission in China. The emissions of black carbon, element carbon (EC), and brown carbon absorption cross-section (ACSBrC) emissions from FMS were in the ranges of 22.6-43.9 t, 213-324 t, and 14.7-35.6 Gm2, respectively. Their emissions tended to concentrate in special periods and areas. The OC emission intensities in central urban areas were 3.85-50.5 times that of rural areas due to the high density of human activities. While the ACSBrC emissions in rural regions accounted for 63.0-79.5% of the total emission result from uncontrolled fireworks burning. A mass of fireworks burning led to extremely higher ACSBrC and EC emissions on Chinese New Year's eve, as 1444 and 262 times their corresponding yearly average values. Interestingly, significant (p<0.01) correlations between human incomes and pollutant emissions were found, but they were positive (r = 0.94) and negative (r = -0.94) for urban and rural regions, indicating the necessity of regulating human lifestyle and increasing income for urban and rural peoples, respectively. This study provided the first-hand data for identifying the emissions, variation trends and impacting factors of FMS, which is helpful for modeling works on air quality, climate effect, and human health risks at specific periods or regions and for modifying their emission control policies. The data in this work could be found at https://doi.org/10.6084/m9.figshare.19999991.v1 (Cheng et al., 2022). [ABSTRACT FROM AUTHOR]

Air emissions from the U.S. pulp and paper sector have been federally regulated since 1978; however, regulations are periodically reviewed and revised to improve efficiency and effectiveness of existing emission standards. The Industrial Sectors Integrated Solutions (ISIS) model for the pulp and paper sector is currently under development at the U.S. Environmental Protection Agency (EPA), and can be utilized to facilitate multi-pollutant, sector-based analyses that are performed in conjunction with regulatory development. The model utilizes a multi-sector, multi-product dynamic linear modeling framework that evaluates the economic impact of emission reduction strategies for multiple air pollutants. The ISIS model considers facility-level economic, environmental, and technical parameters, as well as sector-level market data, to estimate the impacts of environmental regulations on the pulp and paper industry. Specifically, the model can be used to estimate U.S. and global market impacts of new or more stringent air regulations, such as impacts on product price, exports and imports, market demands, capital investment, and mill closures. One major challenge to developing a representative model is the need for an extensive amount of data. This article discusses the collection and processing of data for use in the model, as well as the methods used for building the ISIS pulp and paper database that facilitates the required analyses to support the air quality management of the pulp and paper sector. [ABSTRACT FROM AUTHOR]

Abstract: This article introduces a bottom-up global model of the pulp and paper sector (PULPSIM) with a focus on energy consumption and carbon emissions. It is an annual recursive simulation behavioural model with a 2030 time horizon incorporating several technological details of the industry for 47 world regions. The long time horizon and the modular structure allow the model users to assess the effects of different environmental, energy and climate policies in a scenario comparison setup. In addition to the business as usual developments of the sector, a climate commitment scenario has been analysed, in which the impacts of changing forest management practices are also included. The climate scenario results reveal that there is a significant carbon reduction potential in the pulp and paper making, showing a number of specific features: the central role of the fibrous resource inputs and the potential impact of increased waste wood and black liquor based heat generation. [Copyright &y& Elsevier]

In 2017, a carbon emissions trading market will be launched nationwide by the China government. Calculating the enterprise carbon emissions is an important prerequisite and basis for trading. This paper discussed types of greenhouse gases, calculation boundaries and methods, energy consumption, carbon emissions, and intensity of a representative integrated pulp and paper mill in China based on China Guidance and Greenhouse Gas Protocol Tools. The results showed that there were 435,000 tonnes (t) of CO2 emissions from that mill in 2014 that did not contain emissions of biomass energy, which was 8 times higher than that of fossil energy. The pulp carbon intensity based on the mill was 0.230 t CO2/Adt, which accounted for 7.50% to 57.4% in other pulps' based on the product. Intensity based on Gross Domestic Product (GDP) was 1.090 t CO2e/1000 USD and accounted for 56.8% intensity in the China paper industry. The intensity based on sales accounted for 52.6% in the firstclass enterprise in the developed country. It also showed that intensity was influenced by the species of raw material, energy, and products, which provided the mill with measures for energy saving and emissions reduction to obtain the redundant carbon emissions in the trading. [ABSTRACT FROM AUTHOR]

Abstract: Carbon capture and storage (CCS) is one of a suite of technology options that might play a significant role in reducing greenhouse gas emissions. However, outside of traditional enhanced oil and gas recovery operations with a well established business model, CCS project deployments are struggling with adoption of a federal or international climate policy driver appearing unlikely for the foreseeable future. As part of a feasibility study for an industrial CCS project at the Boise White Paper mill in Washington State, a business model and CCS system design was developed that provided financial surety for the project developers while recognizing that uncertainty in revenue forecasts for CO2 storage would persist for the foreseeable future. Key to the business model was installation of a new 37MWe biomass-fueled power island at the plant that would replace antiquated boilers and that could still supply the necessary steam to run pulp and paper production operations when capturing CO2 emissions under favorable market conditions for monetizing CO2 storage credits. Under unfavorable market conditions, CO2 capture would be suspended and excess power generated from the plant would reduce external electrical energy purchases required for paper mill operations. The net CO2 reduction for the project versus current operations is 1.0MMT of CO2 per year with the CCS system online, and 139ktons per year with the CCS system offline due to reduced natural gas co-firing. So, both operational modes offered a significant net reduction in CO2 emissions. Based on assumptions regarding electricity and natural gas pricing, and CO2 storage revenue generated through an open market mechanism priced at $15 per metric ton CO2, the payback period for the project capturing 0.5MMT/yr (62% of total CO2 production) was estimated at 6.7 years versus 7.4 years with the CCS system offline. Geologic storage was evaluated in the deep flood basalt formations that dominate the storage capacity in Eastern Washington. Sub-basalt sediments were also examined at the site to provide alternative or supplemental storage capacity in the event that storage in the basalt sequences did not prove technically or economically feasible. [Copyright &y& Elsevier]

There are a great number of DEA models proposed to deal with ecological efficiency problems with undesirable outputs. However, which model should be used in a specific scenario or how about the discriminability of a given DEA model is hard to decide in practice. This paper uses the ecological Shannon DEA procedure based upon the existing study to obtain an ecological comprehensive efficiency score for each decision units. The procedure is used to appraise the ecological evaluation to 32 paper mills along the Huai River in China. The results seem reasonable since they integrate the results of existing relevant DEA models, and calculate the importance degree of each model. The procedure can also be used to determine the pollutant emission quotas for those paper mills. [ABSTRACT FROM AUTHOR]

Abstract: 1–2% of global carbon emissions arise in paper production, but the EU plans a 60% cut by 2050. Known process improvements give a 30% cut, but demand may double by 2050: can paper be re-used without recycling by print removal? Three techniques have been developed: abrasion operating in an adhesive wear regime; longer wavelength lasers can ablate toner-print; a solvent can effectively dissolve toner. Energy analysis shows that print removal requires around 10% of the energy required for a new sheet and if this method supplies 80% of future demand, the 2050 carbon target could be achieved. [Copyright &y& Elsevier]

Accompanying China's accession to the World Trade Organization, the rapid development of the Chinese economy has led to increasingly serious environmental issues. However, the inherent mechanisms underlying the impact of Environmental Information Disclosure (EID) policy and trade on the environmental effects of Chinese paper enterprises remain unclear in the context of the era's requirement for a resource-conserving and environmentally-friendly society. The pollution problem in the papermaking industry has received attention worldwide, and how to balance the environmental and development issues of papermaking enterprises is an urgent issue that needs to be solved in the academic community. This study explores the impact mechanisms of EID policy and trade on the environmental effects of enterprises from the perspective of financial constraints. Utilizing the PSM-DID model, the study investigates the moderating effects of financial constraints on the EID policy and import-export trade. The findings reveal that both external and internal financial constraints have negative, detrimental effects on the environmental effects of the EID policy and trade. These constraints impede research and development investment and technological upgrades, hinder productivity improvement, and hamper the realization of "regulatory and trade innovation effects". This study enriches our understanding of the mechanisms by which trade affects the environmental effects of Chinese paper enterprises and further identifies the impacts of Chinese EID policy and trade on pollution emissions by enterprises, providing a theoretical basis and practical foundation for the government in formulating financial, environmental, and trade policies. • Analyzing the environmental effects of Chinese paper enterprises from the perspective of financing constraints. • This study validated the research hypothesis using three micro databases. • This study decomposes the impact mechanism into three aspects: scale effects, technical effects, and structural effects. [ABSTRACT FROM AUTHOR]

Environmental pollution has become an important obstacle on the path of ecological civilization construction, and it is urgent to control environmental pollution. By establishing an evolutionary game model, this thesis focuses on analyzing how paper-making enterprises choose their own emission reduction strategies under the reward and punishment mechanism. It further analyzes how social welfare changes under the reward and punishment mechanism, and finally through simulation research, this thesis analyzes the evolutionary paths of paper-making enterprises' pollution emission strategies under the reward and punishment mechanism. The results of the reward and punishment mechanism are as follows: under the static reward and punishment mechanism, the game system will repeatedly oscillate around a point. There is no stable equilibrium point at this time. However, under the dynamic reward and punishment mechanism, the game system will tend to a stable equilibrium point. The results of social welfare analysis show that high-intensity rewards will reduce the amount of pollution discharged by paper-making enterprises, thereby maximizing social welfare. On the contrary, when paper-making enterprises discharge a large amount of pollution, they will be subject to high-intensity penalties. When facing high-intensity punishments, paper-making enterprises will tend to not to discharge. So social welfare is also maximized. The simulation research results show that reasonable punishment strategies are more effective than reward ones. Based on this, the author proposes countermeasures, such as establishing a reasonable reward and punishment mechanism, reasonably determining the reward and punishment intensity for polluting enterprises. The emission reduction strategies of paper-making enterprises will be affected by the government's reward and punishment mechanism. A deep study of its internal mechanism is not only of great significance for pollution control but also of great significance for the development of a green economy. [ABSTRACT FROM AUTHOR]

Integrating supplementary cementitious materials (SCMs) in cement-based construction materials is a key strategy for reducing environmental burdens and the greenhouse gas emissions related to cement production. Supplies of commonly applied SCMs such as fly ash and blast furnace slag are becoming limited, and therefore the search for alternative SCMs is of high significance. The present research investigates the viability of four paper mill ashes collected at different stages from the same incineration process as SCMs at different cement substitution rates (5–30 wt%). The ashes were first classified depending on their mineralogical and chemical composition, and their contribution to strength development of the prepared mortars is examined. Furthermore, the effects of the ashes on the hydration kinetics and the fresh and hardened properties of the prepared mortars were studied. The obtained results showed that a high level of SCM replacement accelerates the early hydration reactions and decreases the setting time. In addition, the incorporation of paper mill ashes increased the bound water depending on the ash type and resulted in strength development of the mortars at low replacement percentages (5–10 wt%). This study shows that the ashes belonging to type C medium acid based on bio ash classification could be incorporated as SCMs at a maximum level of 10 wt%, while those corresponding to type C low acid could be used up to 20–30 wt%. • Four paper mill ashes were characterized and classified based on the chemical and mineralogical composition then used as SCM. • Paper mill ashes corresponding to type C low acid based on bioash classification could be used as SCMs up to 20–30 wt%. • The addition rate of paper mill ashes controls the fresh properties and strength development of the mortars. [ABSTRACT FROM AUTHOR]

Abstract: The obnoxious odors generated from pulp and paper industries have been the cause of nuisance since the instigation of these industries. The objective of the study was to develop a metal oxide sensor based electronic nose for rapid measurement of odorant concentration and associated odor intensity of major reduced sulfur compounds emitted from different sources of these pulp and paper mills. The gas samples collected from the surroundings of major source points of industry were exposed to sensor array of the electronic nose and the change in voltage was measured and taken to PC through data acquisition cards. The same sets of samples were also tested with gas chromatography. The results of electronic nose and GC-FPD were correlated using response surface methodology to know the odorant concentration. The model fed with unknown industrial samples had more than 95% prediction capability. To determine odor intensity by electronic nose firstly a collective index was generated using SVD based 2-norm method (e-nose index) proportional to the sensors response relative to reference gas, methyl mercaptan. Secondly the e-nose index was associated with human expert evaluations. The training of the electronic nose enabled it to predict odorant concentration found at the industrial site and associated odor intensity in methyl mercaptan equivalent. The overall results of the experiments carried out suggest the potential of electronic nose as a device for on or off line measurement of odorant concentration and odor intensity. [Copyright &y& Elsevier]

Highlights: [•] Estimation of GHG emission and energy consumption in wastewater treatment plants. [•] On-site and off-site emissions of carbon dioxide, methane, and nitrous oxide. [•] Higher GHG emission in anaerobic and hybrid plants due to higher CH4 generation. [•] Recovery and use of biogas satisfy the energy demands of treatment systems. [•] Higher off-site than on-site GHG emissions due to the use of fuel and material. [ABSTRACT FROM AUTHOR]

In this paper an approach for analysing the potential for implementation of different technology pathways for the European pulp and paper industry (PPI) is presented. The approach is based on detailed technical research and aggregates the knowledge from previous studies to incorporate the whole European PPI. Thus, the potential for different technology pathways can be estimated on a European level whilst still considering important characteristics of individual mills. The usefulness of the approach was exemplified by applying it to a case study of the potential for introduction of carbon capture and storage (CCS) within the European PPI. The results from the case study show that for the European PPI, CCS has an up-hill road in order to be a viable, large scale alternative for reduction of CO2 emissions. If CCS is to be introduced in large scale within the European PPI, large biomass-based point sources of CO2 emissions need to be included when planning for CCS infrastructure and also the infrastructure needs to be built out for clusters emitting <20 MtCO2/yr. [ABSTRACT FROM AUTHOR]

Greenhouse gas (GHG) emissions of the Quebec pulp and paper industry fell by more than 30 percent from 1990 to 2006. We use an energy demand model to analyze the contributions to this decrease of energy prices, product mix, technological change, and biomass use. The product mix is made of pulp, and cardboard, and paper. Pulp is an intermediate product for the industry, but not necessarily so for mills; vertical integration varies across mills and presents different opportunities to transfer heat between stages of production. Chemical and mechanical pulping processes are used to form two groups of pulp and paper mills. We find that changes of product mixes contributed the most to reduce GHG emissions, followed to a lesser extent by increases of fuel prices relative to electricity. The estimated electricity and fuel price elasticities are low. However it is still possible to significantly reduce GHG emissions by substituting natural gas for heavy fuel oil; such a substitution could be brought about by a small change of their relative price. [ABSTRACT FROM AUTHOR]

Paper recycling is an environmental important activity that is carried out in all the countries, but during the recycling process a paper waste is produced. Generally these wastes are placed in landfill sites but it is possible to profit it as secondary fuel and raw material in manufacture furnaces. In this work the combustion of the waste papers with cement and ceramic raw material has been studied with the objective to analyse the interaction of these substances with the emitted pollutants like PAHs and PCDD/Fs. The results of the study show that the presence of inorganic material produces an increment in the lighter PAH emission but chlorinated compounds are not affected. The PCDD/F emission level found in the combustion of this waste is quite low compared with other wastes subjected to similar conditions. [Copyright &y& Elsevier]

Chlorine bleaching is still practiced by non-wood pulp and paper mills in China, resulting in considerable formation and emission of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs). We investigate the distribution of PCDD/Fs in different papermaking processes and dioxin emissions at six typical Chinese non-wood pulp and paper mills. Raw materials for papermaking included reed, wheat straw, bamboo, and sugar cane bagasse. The formation and emission of PCDD/Fs varied strikingly according to bleaching processes and raw materials. Elemental chlorine bleaching promoted the formation of tetra- to octa-CDDs and 2,3,7,8-TCDF, while hypochlorite bleaching only gave rise to a significant increase of 2,3,7,8-TCDF. Bleaching with elemental chlorine and hypochlorite increased 2,3,7,8-TCDF 0.9-42.5 and 0.3-4.1 times, respectively. Most of the 2,3,7,8-TCDF formed at hypochlorite bleaching stage was partitioned into the effluent, which indicated that hypochlorite bleaching was also an important emission source of dioxins. The removal of PCDD/Fs occurred visibly during alkaline digestion, alkaline extraction, and hydrogen peroxide bleaching. Furthermore, the annual emission of PCDD/Fs from Chinese non-wood pulp and paper mills was evaluated. [ABSTRACT FROM AUTHOR]

Abstract: This study uses Life Cycle Assessment (LCA) to assess the environmental profiles and greenhouse gas (GHG) emissions for bioethanol production from waste papers and to compare them with the alternative waste management options of recycling or incineration with energy recovery. Bioethanol production scenarios both with and without pre-treatments were conducted. It was found that an oxidative lime pre-treatment reduced GHG emissions and overall environmental burdens for a newspaper-to-bioethanol process whereas a dilute acid pre-treatment raised GHG emissions and overall environmental impacts for an office paper-to-bioethanol process. In the comparison of bioethanol production systems with alternative management of waste papers by different technologies, it was found that the environmental profiles of each system vary significantly and this variation affects the outcomes of the specific comparisons made. Overall, a number of configurations of bioethanol production from waste papers offer environmentally favourable or neutral profiles when compared with recycling or incineration. [Copyright &y& Elsevier]

The pulp and paper industry is a high energy consuming and polluting sector, and carbon emissions emitted from this sector are worthy of attention. This article, based upon an analysis of China’s Pulp and Paper Industry (CPPI), provides estimates of each of the following: carbon emissions from energy consumption, pre-treatment sector, combustion of condensed black liquor, and methane emitted from incomplete aerobic digestion during sewage treatment of CPPI. During the study period (2005–2012), total CO 2 emissions ranged from 126.0 Mt to 155.4 Mt. Energy consumption was estimated to be the largest source of carbon emissions, however, due to the application of the local emission inventory rather than the IPCC inventory, energy consumption decreased by 4.7%, a lower percentage than was calculated in a previous study. According to this study’s estimation, the emissions caused by the recovery of biomass energy contributed 26–29% of the total CO 2 emissions. CH 4 generated from sewage treatment accounted for 9–11% of the total carbon emissions. The CO 2 intensity dropped during the study period, which reflected the improvement of energy efficiency in the pulp and paper industry. The outcome of this study provides not only detailed information about CPPI’s carbon emissions, but also a calculation framework for studying carbon emissions from pulp and paper sector in the other regions. It suggests that the local carbon emissions inventory should be used for estimating carbon emissions and to reduce the fossil fuel energy, increase energy recovery from biomass, and that promoting cleaner production is essential to achieve a low carbon development of the pulp and paper industry. [ABSTRACT FROM AUTHOR]

Co-firing of coal and paper mill sludge was conducted in a 103 MWth circulating fluidized bed boiler to investigate the effect of the sludge feeding rate on emissions of SOx, NOx, and CO. The preliminary results show that emissions of SOx and NOx decrease with increasing sludge feeding rate, but CO shows the reverse tendency due to the decrease in combustion temperature caused by a large amount of moisture in the sludge. All emissions met the local environmental requirements. The combustion ashes could be recycled as feed materials in the cement manufacturing process. [Copyright &y& Elsevier]

This paper discusses mechanisms for the allocation of emission permits (AEP) among a group of manufacturing companies aiming at controlling the total emission level of the group. Data envelopment analysis is adopted and extended to construct the AEP models. Proposed methods allocate the permits on the basis of the current input and output levels of individual firms, rather than historical records. Two variations of AEP mechanisms are considered. One situation is that one of the member firms dominates the responsibility of allocating emission permits on behalf of the group (individual AEP scenario). This dominating firm will maximise its own emission permit before allocating permits among other members in the group. The other situation is that a third-party central governing body is centrally responsible for coordinating the AEP among all group members (Central AEP scenario). Proposed mechanisms are applied to analyse efficiencies of a group of paper mills. The result shows that the mode of central AEP mechanism is a better choice than that of the individual AEP mechanism. Central AEP not only maximises the whole efficiency of the group but also improves efficiencies of individual firms. In contrast, with individual AEP, one firm gains efficiency at the loss of others. [ABSTRACT FROM PUBLISHER]

Purpose - This paper aims to detail the design of a campus climate change strategy, transport strategy and paper reduction strategy at the University of Technology, Sydney (Australia). Design/methodology/approach - The approach to strategy development used desktop research and staff/student consultation to inform the development of objectives, targets and actions for each strategy. The strengths and weaknesses of the governance structures for strategy design and implementation are also discussed. Findings - A selection of targets are given here, with further details of objectives and actions in the main text. Climate change: reduce emissions by 11 percent by 2012/2013, 30 percent by 2020. Transport: double the proportion of staff/student commuting trips by walking and cycling to 35 percent by 2011. Paper reduction: by 2011, decrease paper purchased by 20 percent and increasing recycled paper use to 30 percent. The momentum generated by the strategy development shows that it can play a significant role in creating a more sustainable university. Practical implications - Practical guidance for universities and organisations undergoing organisational change for sustainability is given with a focus on: how to engage with staff and students to develop shared aspirations and reflect these in tangible objectives, targets and actions; and, how to evolve organisational structures to implement strategies and create a sustainable higher education institution. Originality/value - The value of this work lies in the frank reflections on the processes used to engage stakeholders and develop the strategies as well as with the tangible targets and actions presented which will be of interest for other universities seeking to benchmark their own activities. [ABSTRACT FROM AUTHOR]

This paper presents the eco-efficiency assessment of the pulp and paper industry in Myanmar by using the key indicators such as raw material consumption, energy consumption, total waste output, water consumption, and CO emissions. The study was carried out by using quantitative methods for data analysis of the production, consumptions and emissions from fiscal year 2001–2005. The results revealed that the level of economic and environmental performance using the eco-efficiency ratio for each fiscal year has decreased since year 2002, and factory tried to increase the level of eco-efficiency again in year 2005. There was the positive aspect that factory could optimize the waste utilization by transferring lime mud to the cement factory in the last two fiscal years. This analysis showed the root causes that led to the losses of material, energy and water consumption and discussed how to conserve those utilities. [ABSTRACT FROM AUTHOR]

In this multiple-case study the BAT-associated techniques and relative emission levels presented in the EU's best available techniques (BAT) reference document for the pulp and paper industry (PP-BREF) are compared with the techniques applied and the relative emission levels achieved in the Finnish pulp and paper industry. Information on the emissions of 24 Finnish pulp and paper plants was compiled from the national databases maintained by the Finnish Environment Institute. Moreover, a supportive study was conducted on the use of the PP-BREF in the environmental permitting process. The techniques applied in the studied plants represented the BAT as defined in the PP-BREF to a high degree, but the emission levels showed a larger variation. Possible reasons for this variation were discussed. A BAT emission index (BEI) was designed to trace the degree to which the BAT-associated emission levels were achieved as a whole. The BEI appeared to be a useful indicator for assessing the BAT-related environmental performance of the plants. An important area for improvement, identified from the point of view of the applicability of the PP-BREF in the permit process, was the information on waste management issues. Moreover, a consistent cross-media assessment in the PP-BREF was called for. Copyright © 2005 John Wiley & Sons, Ltd and ERP Environment. [ABSTRACT FROM AUTHOR]

India's Indo-Gangetic Plain (IGP) region has become the global hotspot of air pollution, and stubble burning in northern India has increased the concern due to its impact on air quality and health. The current study focuses on studying the diurnal variation of air pollutants for the first time covering Haryana, India, and identifying the sources responsible for air pollutants emissions during the different seasons of the year. Based on ecology and cropping pattern, the study area was divided in three zones. In all seasons, the diurnal peak concentrations of particulate matter (PM2.5 and PM10) were found highest in Zone 2 as compared to Zone 1 and Zone 3, which can be due to the high polluting districts located in Zone 2 including Hisar where thermal power plants, stainless steel producing industry and pulp and paper industry are located along with district Faridabad which is known as the industrial capital of Haryana. The lowest average hourly concentration of PM10 and PM2.5 was found in late afternoon hours in winter, pre-monsoon and post-monsoon season in all three zones due to a decrease in traffic volumes which lead to low emission rates along with increase in the mixing height which cause favorable dispersion conditions. The lowest hourly mean concentration of CO, NOx and NH3 in all zones was found during the afternoon hours in all seasons. The study also focuses on understanding the day and time patterns and the maxima and minima of pollutants concentrations in different zones of Haryana. [ABSTRACT FROM AUTHOR]

This paper studies plant level data on actual and permitted levels of water pollution emissions for the pulp and paper industry. There is widespread and .substantial overcompliance with the relevant regulations: aggregate BOD emissions in 1992 were only 50% of the amount allowed. Overcompliance appears to imply a zero marginal abatement cost and its prevalence therefore has the potential to .substantially change the debate over the costs of regulation. We show instead that plants incurred substantial costs to overcomply. Marginal abatement costs were roughly $13,000//ton in 1992. We discuss possible explanations for costly overcompliance and their implications for estimation. [ABSTRACT FROM AUTHOR]

This study firstly investigated the species, concentration variation, and emission factors of mercury emitted from the burning of incenses and joss papers in an Asian temple. Both indoor and outdoor speciated mercury (GEM, GOM, and PHg) were sampled by manual samplers, while ambient GEM at an indoor site was in-situ monitored by a continuous GEM monitor. Field measurement results showed that the total atmospheric mercury (TAM) concentrations in indoor and outdoor environments were in the range of 8.03–35.72 and 6.03–31.35 ng/m 3 , respectively. The indoor and outdoor ratios (I/O) of TAM in the daytime and at nighttime were in the range of 0.64–0.90 and 1.50–2.04, respectively. The concentrations of GEM, GOM, and PHg during the holiday periods were approximately 1–4 times higher than those during the non-holiday periods. GEM was the dominant mercury species in the indoor and outdoor environments and accounted for 63–81% of TAM, while the oxidized mercury accounted for 19–37% of TAM. Burning incenses and joss papers in a combustion chamber showed that the concentration of GEM from joss paper burning ranged from 4.07 to 11.62 μg/m 3 , or about 13.97 times higher than that of incense burning, while the concentration of PHg from incense burning ranged from 95.91 to 135.07 ng/m 3 , or about 3.29 times higher than that of joss paper burning. The emission factors of incense burning were 10.39 ng/g of GEM and 1.40 ng/g of PHg, while those of joss paper burning were 12.65 ng/g of GEM and 1.27 ng/g of PHg, respectively. This study revealed that speciated mercury emitted from worship activities had significant influence on the indoor and outdoor mercury concentrations in an Asian temple. Higher intensity of worship activities during holidays resulted in a higher concentration of speciated mercury in indoor and outdoor air, which might cause health threats to worshipers, staffs, and surrounding inhabitants through long-term exposure. [ABSTRACT FROM AUTHOR]

Comprehensive surveys conducted at 5-yr intervals were used to estimate sulfur dioxide (SO2) and nitrogen oxides (NOx) emissions from U.S. pulp and paper mills for 1980, 1985, 1990, 1995, 2000, and 2005. Over the 25-yr period, paper production increased by 50%, whereas total SO2 emissions declined by 60% to 340,000 short tons (t) and total NOx emissions decreased approximately 15% to 230,000 t. The downward emission trends resulted from a combination of factors, including reductions in oil and coal use, steadily declining fuel sulfur content, lower pulp and paper production in recent years, increased use of flue gas desulfurization systems on boilers, growing use of combustion modifications and add-on control systems to reduce boiler and gas turbine NOx emissions, and improvements in kraft recovery furnace operations. [ABSTRACT FROM AUTHOR]

This paper examines the determinants of environmental performance at paper mills, measured by air pollution emissions per unit of output. We consider differences across plants in air pollution abatement expenditures, local regulatory stringency, and productive efficiency. Emissions are significantly lower in plants with a larger air pollution abatement capital stock: a 10 percent increase in abatement capital stock appears to reduce emissions by 6.9 percent. This translates into a sizable social return: one dollar of abatement capital stock is estimated to provide an annual social return of about 75 cents in pollution reduction benefits. Local regulatory stringency and productive efficiency also matter: plants in non-attainment counties have 43 percent lower emissions and plants with 10 percent higher productivity have 2.5 percent lower emissions. For pollution abatement operating costs we find (puzzlingly) positive, but always insignificant, coefficients. [ABSTRACT FROM AUTHOR]

Abstract: In Australia, a pervasive response to increasing atmospheric greenhouse gasses and the exchange of these gasses between the atmosphere and forests has been to focus on storing carbon (C) in forested landscapes. However, the amount of C stored and able to be stored in the landscape, which is often called carbon carrying capacity, is commonly over-estimated and over-emphasised. This occurs, in part, due to a focus on the continent’s most C-rich forests when discussing landscape C storage or carbon carrying capacity, and by failing to account for wildfires that will prevent all forests from becoming old and C-rich. These effects on forest age-class structure and thus C-stocks, in the Australian landscape currently tend to be overlooked at the policy level. Underemphasised is the widely recognised role of wood products in greenhouse gas mitigation, both as a C-stock and by providing society with low emission products. Improving atmospheric outcomes will only be achieved if variation in landscape C stocks is accurately described and the full role of forests in greenhouse gas mitigation including the role of wood products is explored and reflected in policy. [Copyright &y& Elsevier]

Investigation of formaldehyde and VOCs emissions from wood-based panels are of great importance because of their negative impact on human health. In this study, a novel low formaldehyde and VOCs emitting board coated with nanomaterial-added melamine-impregnated papers was developed. Melamine resins which were reinforced with nanomaterials were used to impregnate decor papers. The effect of nanomaterial type (nano TiO2, nano MMT) and loading levels (0.5%, 1%) on formaldehyde and VOCs emissions from wood-based panels with melamine-impregnated papers were investigated. Formaldehyde and VOCs measurement were conducted according to GB 17657-1999 and JIS A1901-2009. Numerical results showed that formaldehyde and VOCs emissions from coating boards were significantly affected by nanomaterials. Compared with control panels, formaldehyde emissions from wood-based panels coated with 0.5% nanoparticles reinforced melamine-impregnated papers decreased slightly. With the increasing of loading level, the emissions decreased to a fairly low value, which were 22.2-36.6% lower than that of control panels. Most emitted VOCs were aromatics and alkane, which were main natural compounds detected in particleboard emissions. Most of the identified VOCs emissions decreased due to the existence of nanomaterial. With the increasing of nanomaterial loading level to 1%, total VOC emissions decreased 22.6-25.6% of control panels. This study provides a meaningful guidance on designing low-emitting wood-based panels with melamine-impregnated paper. [ABSTRACT FROM AUTHOR]

The global production of nondegradable catering straws has skyrocketed due to their versatile properties, which results in significant CO2 emissions and pollution of the ecological system. While paper and polylactic acid straws have gained increasing popularity in the beverage industry, there needs to be more investigation of the vital product properties determining their hedonic differences. This study systematically compared the properties of paper, polylactic acid and plastic straws, and their impacts on the consumer experience and willingness. Results showed that the open structure of paper straws prompted water penetration and absorption, reaching a water absorption of 30% after 10-min wetting, which might affect the taste of the drink. In contrast, the compact polymer matrices of polylactic acid straws prevented mass exchange in their use for drinking but retarded product biodegradation under natural conditions. Results of consumer testing showed that while the participants had a comparable liking of paper and polylactic acid straws to insert into a drink (i.e., 4.16 and 4.47 out of 5, respectively), the intrinsic difference was covered up by the open-ended capping for beverages. For the "fully sealed on top" dataset, paper straws dropped to 3.46, while that for polylactic acid straws remained at 4.70. Furthermore, a biodegradable straw easily inserted into a drink without fracture may positively prompt merchants' revenue. This study is expected to pave the way for the advancement and widespread use of bio-based products. Highlights: 30% water absorption in biodegradable paper straws affects the taste of drinks. Preferable polylactic acid straws had < 0.3% mass loss after 30 days in natural soil. Open-ended design of beverages covers up liking differences between straws. [ABSTRACT FROM AUTHOR]

Reduction of water pollutant emissions and energy consumption is regarded as a key environmental objective for the pulp and paper industry. The paper develops a bottom-up model called the Industrial Water Pollutant Control and Technology Policy (IWPCTP) based on an industrial technology simulation system and multiconstraint technological optimization. Five policy scenarios covering the business as usual (BAU) scenario, the structural adjustment (SA) scenario, the cleaner technology promotion (CT) scenario, the end-treatment of pollutants (EOP) scenario, and the coupling measures (CM) scenario have been set to describe future policy measures related to the development of the pulp and paper industry from 2010-2020. The outcome of this study indicates that the energy saving amount under the CT scenario is the largest, while that under the SA scenario is the smallest. Under the CT scenario, savings by 2020 include 70 kt/year of chemical oxygen demand (COD) emission reductions and savings of 7443 kt of standard coal, 539.7 ton/year of ammonia nitrogen (NH4-N) emission reductions, and savings of 7444 kt of standard coal. Taking emission reductions, energy savings, and cost-benefit into consideration, cleaner technologies like highly efficient pulp washing, dry and wet feedstock preparation, and horizontal continuous cooking, medium and high consistency pulping and wood dry feedstock preparation are recommended. [ABSTRACT FROM AUTHOR]

The concentration of polycyclic aromatic hydrocarbons (PAHs) in the ambient air from a massive open burning of joss paper was simultaneously measured at an open-burning site (OS) and a downwind site (DS) from 6 to 8 August 2006. A total of 16 major PAHs (particle-bound and gas-phase) concentrations were extracted by the Soxhlet analytical method and analyzed by gas chromatography. The dominant PAHs of the total mass of the organic compound at both the sampling sites were low-molecular-weight species. Further, the results showed that the start burning/end burning-dominant PAH concentration ratios at the OS and DS were 10 and 6.2, respectively. Diagnostic ratios were also used in this study to characterize and identify the PAH emission sources. The results suggest that the characterization of air pollutants emitted from open-burning joss paper lies between furnace-burning joss paper and wood combustion. [Copyright &y& Elsevier]

Introduction of the sulfur emissions reduction directive for maritime transport has become a heavily debated policy issue in Northern Europe from the perspective of the future competitiveness of transport-dependent industries. The scientific value of this study is in its contribution to the scarce literature on the future of pulp and paper industry competitiveness from the tightening environmental regulation perspective, highlighting the complementary role of law-abiding and voluntary regulations. Using a Delphi-foresight method, the study evaluates the effectiveness of environmental regulation by identifying its positive and negative aspects for the future success of the pulp and paper industry, and uses the reduction of sulfur emissions as an example. From a business perspective, the panelists saw tightening regulation as both a threat and an opportunity, and stressed the role of the policy implementation in achieving actual environmental improvement. The strict regulatory measures were generally perceived as environmentally advantageous and more effective in the long term, but a rather divided view was seen in the ability of the sulfur emissions directive to effectively govern environmental sustainability. In discussion, the role of more voluntary alternatives to implementing command-and-control type policy measures is emphasized in complementing government legislation, to gain market benefits from greening the entire pulp and paper supply chain. To conclude, the development of sustainable transportation strategies has the potential to contribute toward long-term competitiveness in the pulp and paper industry, especially if new strategic innovation-oriented cross-sector partnerships develop in the production and use of transportation biofuels. [ABSTRACT FROM AUTHOR]

Current management of solid waste from pulp and paper activities represents an environmental and economic burden worldwide due to pollution emissions. This study investigates the potential of hydrothermal carbonisation (HTC) treatment as a sustainable alternative for producing cleaner and energy-dense solid fuel from paper mill sludge. The effect of process parameters (temperature, reaction time and solid load) on hydrochar fuel formation from paper sludge was evaluated and, for the first time, the paper sludge-derived hydrochar was optimised to maximise the mass yield and calorific value using response surface methodology (RSM). The physicochemical characteristics, thermal fuel behaviour, energy recycling efficiency and electricity generation potential were assessed by proximate and ultimate analysis, thermogravimetry, bomb calorimeter, scanning electron microscopy and process energy assessment. Results showed that hydrochar fuel formation and properties were mainly influenced by the process temperature and residence time, and governed by dehydration and decarboxylation reactions which reduced the atomic H/C and O/C ratios by 35.5% and 64%, respectively. The produced hydrochars presented low sulphur, nitrogen and ash content with a maximum calorific value (HHV) of 22.9 MJ/kg, equivalent to the HHV of coal for commercial utility in South Africa. The HHV of the hydrochar corresponded to a 49.80% increase over the HHV of the initial feedstock. The optimum operating conditions were 231 ± 1 °C and 1.99 h for a hydrochar yield of 74.4% and calorific value of 18.5 MJ/kg. The energy assessment showed that up to 58.34% of the energy produced by hydrochar fuel combustion may be recycled as heat or power, while the remaining 41.66% of the combustion energy could be utilised to sustain the HTC treatment of paper sludge. The substantial water demand was concluded to be a drawback. Thus, water recirculation and the potential to catalyse the HTC reactions to increase overall process efficiency will constitute a future study to make the process more environmentally friendly for industrial-scale application. [Display omitted] • Dehydration and decarboxylation were predominant. • Optimum energy yield of 18.5 MJ/kg and 74.4% hydrochar was achieved under 231 ± 1 °C and 1.99 h. • Higher HTC reaction severity enhanced the physicochemical properties of the hydrochar. • Hydrochars produced have low nitrogen and sulphur (<1%) content. [ABSTRACT FROM AUTHOR]

Field studies were conducted at Domtar's Kraft pulp and paper mill (Hawesville, KY) for 2 weeks to investigate the treatment of high volume, low concentration (HVLC) waste gas streams using ozone-enhanced catalytic oxidation technology. The contaminants in the HVLC waste gas from the pulping area of the mill contained mainly methanol (360 ± 80 ppm) and total reduced sulfur compounds [dimethyl sulfide (DMS) (4400 ± 670 ppm) and dimethyl disulfide (150 ± 25 ppm). The catalysts used in the field studies included ViO2/TiO2 and CuO/MoO3/ã-Al2O3. The results of the field study showed ozone-to-sulfur ratios >2, space velocities <1000 h−1, and reaction temperatures ≥250°C are required to achieve >90% destruction of DMS in the HVLC waste gas stream. Ozone-enhanced catalytic oxidation has key environmental advantages over incineration, including mild operating temperatures and thus, lower energy costs and lower NOx formation. Although the technology appeared to be feasible at the laboratory scale, the field study data revealed that several obstacles must be overcome prior to this technology being implemented at large scale. © 2010 American Institute of Chemical Engineers Environ Prog, 2011 [ABSTRACT FROM AUTHOR]

Copyright of Ecoscience (Ecoscience) is the property of Taylor & Francis Ltd and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)