Search

The use of biodegradable polymers for the production of membranes to be used in wastewater treatment has attracted increasing interest considering the possibility of reducing the risk of second pollution. In this work, porous fibrous membranes based on polylactic acid and polyethylene oxide (PEO) blends were prepared. The solutions were electrospun using two approaches: (i) conventional coaxial electrospinning followed by leaching treatment (double-step, DS); (ii) coaxial wet electrospinning with in situ leaching (single-step, SS). By varying PEO type and processing method it was possible to control membranes structure and porosity. DS leaching treatment lead to surface porosity (i.e. shell leaching), while SS allowed obtaining hollow and porous fibers (i.e. with shell and core leaching). Process, properties and structure relationships of devices were analysed trough rheological, morphological, mechanical and surface characterizations. Furthermore, the influence of the different porous structures on oil sorption capacity and reusability of the membranes was evaluated. Results reveal that different porosities lead to a variation in membranes mechanical performance, in their wettability and, consequently, in their oil spill cleanup capacity. Membranes obtained with SS displayed higher performance in oil removal if compared to the DS ones, due to their hollow structure and higher surface area. [ABSTRACT FROM AUTHOR]

Nanofibrous membranes are often the core components used to produce devices for a controlled release and are frequently prepared by electrospinning (ES). However, ES requires high production times and costs and is not easy to scale. Recently, solution blow spinning (SBS) has been proposed as an alternative technique for the production of nanofibrous membranes. In this study, a comparison between these two techniques is proposed. Poly (lactic acid)-based nanofibrous membranes were produced by electrospinning (ES) and solution blow spinning (SBS) in order to evaluate the different effect of liquid (carvacrol, CRV) or solid (chlorhexidine, CHX) molecules addition on the morphology, structural properties, and release behavior. The outcomes revealed that both ES and SBS nanofibrous mat allowed for obtaining a controlled release up to 500 h. In detail, the lower wettability of the SBS system allowed for slowing down the CRV release kinetics, compared to the one obtained for ES membranes. On the contrary, with SBS, a faster CHX release can be obtained due to its more hydrophilic behavior. Further, the addition of graphene nanoplatelets (GNP) led to a decrease in wettability and allowed for a slowing down of the release kinetics in the whole of the systems. [ABSTRACT FROM AUTHOR]

Growing environmental concerns are stimulating researchers to develop more and more efficient materials for environmental remediation. Among them, polymer-based hierarchical structures, attained by properly combining certain starting components and processing techniques, represent an emerging trend in materials science and technology. In this work, graphene oxide (GO) and/or carbon nanotubes (CNTs) were integrated at different loading levels into poly (vinyl fluoride-co-hexafluoropropylene) (PVDF-co-HFP) and then electrospun to construct mats capable of treating water that is contaminated by methylene blue (MB). The materials, fully characterized from a morphological, physicochemical, and mechanical point of view, were proved to serve as membranes for vacuum-assisted dead-end membrane processes, relying on the synergy of two mechanisms, namely, pore sieving and adsorption. In particular, the nanocomposites containing 2 wt % of GO and CNTs gave the best performance, showing high flux (800 L × m−2 h−1) and excellent rejection (99%) and flux recovery ratios (93.3%), along with antifouling properties (irreversible and reversible fouling below 6% and 25%, respectively), and reusability. These outstanding outcomes were ascribed to the particular microstructure employed, which endowed polymeric membranes with high roughness, wettability, and mechanical robustness, these capabilities being imparted by the peculiar self-assembled network of GO and CNTs. [ABSTRACT FROM AUTHOR]

Abstract Porous membranes and thin films containing poly-lactic acid (PLA), carvacrol (CRV) and graphene nanoplatelets (GNP) were fabricated by electrospinning and solvent casting at different formulations. The systems were characterized from a mechanical, morphological, calorimetric and spectroscopic point of view. CRV release as a function of time was studied and a mathematical model was used to fit and interpret the data in order to investigate the release mechanism. The results indicate that the incorporation of GNP generally determined a simultaneous strengthening, stiffening and toughening effect, while preserving a good ductility. Furthermore, integrating GNP allowed tuning the amount and kinetics of CRV release, and proved to reduce the initial burst release effect. [ABSTRACT FROM AUTHOR]

In this work, polylactic acid (PLA) membranes at two different carvacrol (CRV) nominal concentration (i.e. 14 wt% and 28 wt%) were prepared via electrospinning technology. The membranes were characterized by scanning electron microscopy, ATR-FTIR and calorimetric measurements as well as tensile tests. Moreover, the release kinetics of CRV in phosphate buffered solution at 37 °C was monitored through UV–Vis measurements and the data were fitted with a power law model. Results indicated that the successful incorporation of CRV in the polymer matrix damaged the fibers morphology but increased all the mechanical parameters investigated (i.e. elastic modulus, tensile strength and elongation). The power law model highlighted that the mechanism of CRV release changed with time from an anomalous release in the first 6 h to a Fickian diffusion mechanism for both the PLA/CRV systems. [ABSTRACT FROM AUTHOR]

PLA/PCL co-mingled nanofibrous mats were prepared via multi-jet electrospinning. The concentration of PLA and PCL in the co-mingled mats were controlled by changing the flow rate of the two polymer solutions. The amount of PLA and PCL in the co-mingled nanofibrous mats was monitored by UV–Vis measurements through a colored dye added to PLA and by FTIR-ATR analysis. Morphology and mechanical properties of the nanofibrous mats were respectively examined by scanning electron microscopy (SEM) and tensile tests. Water contact angles measurements were also carried out in order to investigate the wettability of the materials. Finally, the hydrolytic degradation of the mats in buffer solution at pH 4, pH 7 and pH 10 were studied up to 50 days. [ABSTRACT FROM AUTHOR]

Most of industrially relevant bioproducts are produced by submerged cultivations of actinomycetes. The immobilization of these Gram-positive filamentous bacteria on suitable porous supports may prevent mycelial cell-cell aggregation and pellet formation which usually negatively affect actinomycete submerged cultivations, thus, resulting in an improved biosynthetic capability. In this work, electrospun polylactic acid (PLA) membranes, subjected or not to O 2 -plasma treatment (PLA-plasma), were used as support for immobilized-cell submerged cultivations of Streptomyces coelicolor M145. This strain produces different bioactive compounds, including the blue-pigmented actinorhodin (ACT) and red-pigmented undecylprodigiosin (RED), and constitutes a model for the study of antibiotic-producing actinomycetes. Wet contact angles and X-ray photoelectron spectroscopy analysis confirmed the increased wettability of PLA-plasma due to the formation of polar functional groups such as carboxyl and hydroxyl moieties. Scanning electron microscope observations, carried out at different incubation times, revealed that S. coelicolor immobilized-cells created a dense “biofilm-like” mycelial network on both kinds of PLA membranes. Cultures of S. coelicolor immobilized-cells on PLA or PLA-plasma membranes produced higher biomass (between 1.5 and 2 fold) as well as higher levels of RED and ACT than planktonic cultures. In particular, cultures of immobilized-cells on PLA and PLA-plasma produced comparable levels of RED that were approximatively 4 and 5 fold higher than those produced by planktonic cultures, respectively. In contrast, levels of ACT produced by immobilized-cell cultures on PLA and PLA-plasma were different, being 5 and 10 fold higher than those of planktonic cultures, respectively. Therefore, this is study demonstrated the positive influence of PLA membrane on growth and secondary metabolite production in S. coelicolor and also revealed that O 2 -plasma treated PLA membranes specifically promoted higher ACT production than not treated membranes. [ABSTRACT FROM AUTHOR]

Electrospinning is a versatile process technology, exploited for the production of fibers with varying diameters, ranging from nano- to micro-scale, particularly useful for a wide range of applications. Among these, tissue engineering is particularly relevant to this technology since electrospun fibers offer topological structure features similar to the native extracellular matrix, thus providing an excellent environment for the growth of cells and tissues. Recently, nanocarbons have been emerging as promising fillers for biopolymeric nanofibrous scaffolds. In fact, they offer interesting physicochemical properties due to their small size, large surface area, high electrical conductivity and ability to interface/interact with the cells/tissues. Nevertheless, their biocompatibility is currently under debate and strictly correlated to their surface characteristics, in terms of chemical composition, hydrophilicity and roughness. Among the several nanofibrous scaffolds prepared by electrospinning, biopolymer/nanocarbons systems exhibit huge potential applications, since they combine the features of the matrix with those determined by the nanocarbons, such as conductivity and improved bioactivity. Furthermore, combining nanocarbons and electrospinning allows designing structures with engineered patterns at both nano- and microscale level. This article presents a comprehensive review of various types of electrospun polymer-nanocarbon currently used for tissue engineering applications. Furthermore, the differences among graphene, carbon nanotubes, nanodiamonds and fullerenes and their effect on the ultimate properties of the polymer-based nanofibrous scaffolds is elucidated and critically reviewed. [ABSTRACT FROM AUTHOR]

Electrospun nanofibers based on polysaccharides represent a consolidated approach in Tissue Engineering and Regenerative Medicine (TERM) and nanomedicine as a drug delivery system (DDS). In this work, two chemical derivatives of a low molecular weight gellan gum (96.7 kDa) with aliphatic pendant tails were processed by electrospinning technique into non-woven nanofibrous mats. In order to generate spinnable blends, it was necessary to associate poly vinyl alcohol (PVA). The relationships between the physicochemical properties and the processability via electrospinning technique of gellan gum alkyl derivatives (GG-C8 and GG-C12 having a degree of alkyl chain derivatization of 17 mol % and 18 mol %, respectively) were investigated. The deposition of nanometric fibers (212.4 nm ± 60.0) was achieved by using the blend GG-C8/PVA spinned at 5% w/v in water. The use of a binary solvent composed of water and ethanol in a volumetric ratio 95:5 improved further spinnability obtaining similar nanofiber diameters (218.0 nm ± 96.0). The rheological analysis has allowed to highlight the role of the alkyl portion (C8 and C12) on the spinnability of the blended polymers. [ABSTRACT FROM AUTHOR]

A novel approach was designed to fabricate high-added value manufacts, starting from cost-effective materials and combining well-known processing techniques. Bi- and three-layered, functionally graded laminates were achieved by direct electrospinning onto dense substrates. The architecture of each multilayer comprises a dense layer formed by solvent casting, which is constituted by polylactic acid (PLA) and carvacrol, and one or two electrospun fibrous skin layers, consisting of PLA only. Processing-structure-properties relationships of such materials were investigated. As regards mechanical behavior, the amount of fibrous PLA layers determined an increase of stiffness from 20 to 35 MPa, adequately predicted by isostrain model, whereas the breaking properties proved to be governed by the dense layer, with values of tensile strength (6 MPa) and elongation at break (200%) almost ten-folded with respect to those of electrospun fibrous PLA. As concerns carvacrol release behavior, the presence of fibrous skin, especially in three-layered structures, proved to progressively reduce the burst delivery at early stage of immersion, while enhancing the depletion time, i.e. the release activity, of such devices from 288 to 795 h. Furthermore, a correlation was found between the thickness of fibrous layers and release kinetics, thus suggesting that adjusting simple variables, such as electrospinning time, allows to control the ultimate properties of these devices. Moreover, this approach enables gathering the mechanical robustness of a dense film with the extremely large specific area of fibrous materials, thus showing promising potential for a broad range of application fields. Unlabelled Image • We designed a combined processing approach coupling electrospinning and film casting. • We achieved laminates comprising a dense PLA-carvacrol layer and fibrous PLA skins. • This approach allows devices with tunable properties by controlling the process. • Graded laminates gather high mechanical performance and tunable carvacrol release. • Combined processing approach can be easily extended to other processes and materials. [ABSTRACT FROM AUTHOR]

Three different solvent mixtures were used to prepare electrospun membranes based on polylactic acid (PLA), polyethylene oxide (PEO) and enzymatic cellulose nanofibers (CNF). The materials were characterized from a morphological, spectroscopic, mechanical and rheological point of view. Furthermore, swelling test were performed in order to assess the water uptake of each sample. The results put into evidence that the choice of the solvents affects the structure and the properties of the membranes. Among the protocols tested, using chloroform/acetone/ethanol mixture was found to allow a high degree of CNF dispersion and a good electrospinnability of polymer solutions. These features led to membranes with impressive improvement of mechanical properties (+350% in stiffness, +350% in tensile strength and +500% in toughness) with respect to those of PLA/PEO and dramatically increased the water uptake of these materials (up to +350% within 120 min). • Biodegradable polymers containing nanocellulose were electrospun into membranes. • A proper choice of solvents is crucial to gather materials with different solubility. • Three solvent mixtures were tested to allow electrospinnability and filler dispersion. • Nanocellulose enhanced mechanical properties of membranes (up to +500%). • Nanocellulose increased the water uptake of such membranes (up to +350%). [ABSTRACT FROM AUTHOR]