Search

It is predicted that ultra-short electric field pulses (nanosecond) can selectively permeabilize intracellular structures (e.g., mitochondria) without significant effects on the outer cell plasma membrane. Such a phenomenon would have high applicability in cancer treatment and could be employed to modulate cell death type or immunogenic response. Therefore, in this study, we compare the effects of 100 µs x 8 pulses (ESOPE - European Standard Operating Procedures on Electrochemotherapy) and bursts of 100 ns pulses for modulation of the mitochondria membrane potential. We characterize the efficacies of various protocols to trigger permeabilization, depolarize mitochondria (evaluated 1 h  after treatment), the extent of ATP depletion and generation of reactive oxygen species (ROS). Finally, we employ the most prominent protocols in the context of Ca 2+ electrochemotherapy in vitro. We provide experimental proof that 7.5-12.5 kV/cm x 100 ns pulses can be used to modulate mitochondrial potential, however, the permeabilization of the outer membrane is still a prerequisite for depolarization. Similar to 100 µs x 8 pulses, the higher the permeabilization rate, the higher the mitochondrial depolarization. Nevertheless, 100 ns pulses result in lesser ROS generation when compared to ESOPE, even when the energy input is several-fold higher than for the microsecond procedure. At the same time, it shows that even the short 100 ns pulses can be successfully used for Ca 2+ electrochemotherapy, ensuring excellent cytotoxic efficacy., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Electroporation is a phenomenon of transient or irreversible permeabilization of the cell membrane after pulsed electric field treatment. Fluorescent probes are frequently used to assess the extent of permeabilization, however, as an alternative, a D-luciferin oxidation-based method can be used. In this work, we have used sequences of a microsecond (1.3 kV/cm × 100 µs) and nanosecond (12.5 kV/cm × 100 ns) pulses to trigger various levels of cell permeabilization and assessed the differences in the response using a conventional fluorescent probe (YO-PRO-1 (YP)) and D-luciferin oxidation methodology. The nanosecond pulses (n = 5-100) have been delivered with 1 kHz repetition frequency, and the results were compared with 1 MHz protocols. Additionally, the effects of extracellular Ca 2+ have been assessed. Various concentrations of CaCl 2 (2, 5, and 10 mM) have been used, and it was shown that the bioluminescence of the cells after electroporation depends on extracellular calcium concentration. It was shown that the changes in bioluminescence signal could be used as a marker of cell membrane permeabilization on par with YP assay when calcium is added and thus, effectively employed for analysis of electroporation phenomenon in vitro both for nanosecond and microsecond pulses., (Copyright © 2022 Elsevier B.V. All rights reserved.)

One of current applications of electroporation is electrochemotherapy and electroablation for local cancer treatment. Both of these electroporation modalities share some similarities with radiation therapy, one of which could be the bystander effect. In this study, we aimed to investigate the role of the bystander effect following these electroporation-based treatments. During direct CHO-K1 cell treatment, cells were electroporated using one 100 µs duration square wave electric pulse at 1400 V/cm (for bleomycin electrotransfer) or 2800 V/cm (for irreversible electroporation). To evaluate the bystander effect, the medium was taken from directly treated cells after 24 h incubation and applied on unaffected cells. Six days after the treatment, cell viability and colony sizes were evaluated using the cell colony formation assay. The results showed that the bystander effect after bleomycin electrotransfer had a strong negative impact on cell viability and cell colony size, which decreased to 2.8% and 23.1%, respectively. On the contrary, irreversible electroporation induced a strong positive bystander effect on cell viability, which increased to 149.3%. In conclusion, the results presented may serve as a platform for further analysis of the bystander effect after electroporation-based therapies and may ultimately lead to refined application of these therapies in clinics.

The cell membrane permeabilization in electroporation studies is usually quantified using fluorescent markers such as propidium iodide (PI) or YO-PRO, while Chinese Hamster Ovary cell line frequently serves as a model. In this work, as an alternative, we propose a sensitive methodology for detection and analysis of electroporation phenomenon based on bioluminescence. Luminescent mice myeloma SP2/0 cells (transfected using Luciferase-pcDNA3 plasmid) were used as a cell model. Electroporation has been studied using the 0.1-5 μs × 250 and 100 μs × 1-8 pulsing protocols in 1-2.5 kV/cm PEF range. It was shown that the bioluminescence response is dependent on the cell permeabilization state and can be effectively used to detect even weak permeabilization. During saturated permeabilization the methodology accurately predicts the losses of cell viability due to irreversible electroporation. The results have been superpositioned with permeabilization and pore resealing (1 h post-treatment) data using PI. Also, the viability of the cells was evaluated. Lastly, the SP2/0 tumors have been developed in BALB/C mice and the methodology has been tested in vivo using electrochemotherapy with bleomycin., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Micro-millisecond range electric field pulses have been used for decades to facilitate DNA transfer into cells and tissues, while the growing number of clinical trials underline the strong potential of DNA electroporation. In this work, we present new sub-microsecond range protocols and methodology enabling successful electrotransfection in the sub-microsecond range. To facilitate DNA transfer, a 3 kV/60 A and high frequency (1 MHz) sub-microsecond range square wave generator was applied in the study. As a model, Chinese hamster ovary (CHO-K1) cells were used. Sub-microsecond range (300-700 ns) high frequency pulsed electric fields of 2-15 kV/cm were applied. The efficiency of electrotransfection was evaluated using two green fluorescent protein encoding plasmids of different size (3.5 kbp and 4.7 kbp). It was shown that transfection efficiency cannot be effectively improved with increase of the number of pulses after a certain threshold, however, independently on the plasmid size, the proposed sub-microsecond range pulsing methodology (2-5 kV/cm; n = 250) efficiency-wise was equivalent to 1.5 kV/cm × 100 μs × 4 electroporation procedure. The results of the study are useful for further development of in vitro and in vivo methods for effective electrotransfer of DNA using shorter pulses., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Measurement of cell transmembrane potential (TMP) is a complex methodology involving patch-clamp methods or fluorescence-based potentiometric markers, which have limited to no applicability during ultrafast charging and relaxation phenomena. In such a case, analytical methods are applied for evaluation of the voltage potential changes in biological cells. In this work, the TMP-based electrotransfer mechanism during ultra-high frequency (≥1 MHz) electric fields is studied and the phenomenon of rapid membrane charge accumulation, which is non-occurrent during conventional low-frequency electroporation is simulated using finite element method (FEM). The influence of extracellular medium conductivity (0.1, 1.5 S/m) and pulse rise/fall times (10-50 ns) TMP generation are presented. It is shown that the medium conductivity has a dramatic influence on the electroporation process in the high-frequency range of applied pulsed electric fields (PEF). The applied model allowed to grasp the differences in polarization between 100 and 900 ns PEF and enabled successful prediction of the experimental outcome of propidium iodide electrotransfer into CHO-K1 cells and the conductivity-dependent patterns of MHz range PEF-triggered electroporation were determined. The results of this study form recommendations for development and pre-evaluation of future PEF protocols and generators based on ultra-high frequency electroporation for anticancer and gene therapies.

Antifungal substances that are used for the treatment of candidiasis have considerable side effects and Candida yeasts are known to obtain drug resistance. The multidrug resistance cases are promoting the search for the new alternative methods and pulsed electric field (PEF) treatment could be the alternative or could be used in combination with conventional therapy for the enhancement of the effect. We have shown that nanosecond range PEF is capable to induce apoptosis in the S. cerevisiae as well as in the drug resistant C. lusitaniae and C. guilliermondii. Supplementing the PEF procedure with formic acid (final concentration 0.05%) resulted in improvement of the inactivation efficacy and the induction of apoptosis in the majority of the yeast population. After the treatment yeast were displaying the DNA strand brakes, activation of yeast metacaspase and externalization of phosphatidylserine. Apoptotic phenotypes were registered already after 30 kV/cm × 250 ns × 50 pulses treatment. The highest number of apoptotic yeast cells (>60%) was obtained during the 30 kV/cm × 750 ns × 50 pulses protocol when combined with 0.05% formic acid. The results of our study are useful for development of new non-toxic and effective protocols to induce programed cell death in different yeast species and thus minimize inflammation of the tissue., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Electroporation is a widely-used methodology for permeabilization of cells using pulsed electric field (PEF). In this paper, we compare the electroporation efficiency in terms of molecular transport and the generated reactive oxygen species (ROS) between low (1 Hz) and high (1 MHz) frequency nanosecond range PEF bursts. We used aluminum, copper and stainless-steel electrodes and evaluated the influence of electrode material on ROS generation and electroporation. Bursts of 25 or 50 pulses of 7-14 kV/cm amplitude and 200 ns duration were applied, and the results were compared to those obtained using electroporation with pulses of equivalent energy in conventional microsecond range. It was determined that electroporation efficiency scales with ROS generation and is highly affected by the material of electrodes and by the applied pulsing protocols. We present experimental evidence that metal ions, and not the pH fronts near the electrodes, play a major role in generation of ROS during electroporation., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Invasive infections caused by drug-resistant bacteria are frequently responsible for fatal sepsis, morbidity and mortality rates. In this work, we propose a new methodology based on nanosecond high frequency electric field bursts, which enables successful eradication of bacteria in vivo. High frequency (15 kHz) 15-25 kV/cm 300-900 ns pulsing bursts were used separately and in combination with acetic acid (0.1-1%) to treat Pseudomonas aeruginosa in a murine model. Acetic acid 1% alone was effective resulting in almost 10-fold reduction of bacteria viability, however combination of nanosecond electric field and acetic acid 1% treatment was the most successful showing almost full eradication (0.01% survival compared to control) of the bacteria in the contaminated area. The short duration of the pulses (sub-microsecond) and high frequency (kHz range) of the burst enabled reduction of the muscle contractions to barely detectable level while the proposed applicators ensured predominantly topical treatment, without electroporation of deeper tissues. The results of our study have direct application for treatment of wounds and ulcers when chemical treatment is no longer effective.

Genetic manipulation of T cells is frequently inefficient, however, when combined with physical methods (i.e. electroporation) a promising alliance with immunotherapy can be formed. This study presents new data on permeabilization of murine thymocytes and splenocytes as a T cell model using pulsed electric (PEF) and electromagnetic field (EMF). The 300ns, 500ns, 2μs and 100μs pulse bursts in a broad range of PEF 0-8kV/cm were applied separately and in combination with 3.3T, 0.2kV/cm EMF pulses. The permeabilization efficiency was evaluated using fluorescent dye (YO-PRO-1) and flow cytometry. It was shown that a >14% increase in thymocytes permeabilization is achieved when electroporation is applied in combination with EMF, however splenocytes responded in a different manner - a statistically significant (P<0.05) reduction in permeabilization was observed. The cytokine secretion patterns were mainly unaltered independently on the applied treatment parameters determined by secretion of IFNγ, IL-4 and IL-17 - the main cytokines of Th1, Th2 and Th17 cells. The results of this study are useful for development of pulsed power protocols for effective genetic modification of T cells., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Recently, a novel contactless treatment method based on high-power pulsed electromagnetic fields (PEMF) was proposed, which results in cell membrane permeabilization effects similar to electroporation. In this work, a new PEMF generator based on multi-stage Marx circuit topology, which is capable of delivering 3.3 T, 0.19 kV/cm sub-microsecond pulses was used to permeabilize pathogenic yeast Candida albicans separately and in combination with conventional square wave electroporation (8-17 kV/cm, 100 μs). Bursts of 10, 25, and 50 PEMF pulses were used. The yeast permeabilization rate was evaluated using flow cytometric analysis and propidium iodide (PI) assay. A statistically significant (P < 0.05) combinatorial effect of electroporation and PEMF treatment was detected. Also the PEMF treatment (3.3 T, 50 pulses) resulted in up to 21% loss of yeast viability, and a dose-dependent additive effect with pulsed electric field was observed. As expected, increase of the dB/dt and subsequently the induced electric field amplitude resulted in a detectable effect solely by PEMF, which was not achievable before for yeasts in vitro.

Pathogenic fungi cause many life-threatening infections, especially among individuals with immune system dysfunction. The antifungal drugs commonly used to suppress fungal pathogens can result in long-lasting and toxic therapy. In this work, irreversible electropermeabilization was used to investigate the dynamics of the decrease in Candida albicans colony vitality after application of a pulsed electric field (PEF) and use of antifungal drugs. The fungi were subjected to single 250-µs to 2-ms (0.5-2.5 kV/cm) pulses or repeated short 5-µs pulses, and efficacy was compared. It was shown that electropermeabilization combined with antifungal agents results in rapid and more effective treatment, eliminating more than 90% of C. albicans colony-forming units in a single procedure, which is advantageous in biomedicine. It was also observed that, because of application of PEF and use of the antifungal agents, the Candida cells form cell aggregates and average live cell size is reduced by as much as 53%.

Candida lusitaniae is an opportunistic yeast pathogen, which can readily develop resistance to antifungal compounds and result in a complex long-term treatment. The efficient treatment is difficult since structure and metabolic properties of the fungal cells are similar to those of eukaryotic host. One of the potential methods to improve the inhibition rate or the cell permeability to inhibitors is the application of electroporation. In this work we investigated the dynamics of the growth inhibition and membrane permeabilization of C. lusitaniae by utilizing the various pulse shape and duration electric field pulses. Our results indicated that single electroporation procedure using 8 kV/cm electric field may result in up to 51 ± 5% inhibition rate. Also it has been experimentally shown that the electroporation pulse shape may influence the inhibitory effect; however, the amplitude of the electric field and the pulse energy remain the most important parameters for definition of the treatment outcome. The dynamics of the cell membrane permeabilization in the 2-8 kV/cm electric field were overviewed.

Electroporation is an appealing way of stimulating living cells, which causes permanent or temporary nanoporosities in the structure of the biological objects. However, the technique has a disadvantage such as a requirement of contact between the electrodes and the cell medium. In this review, a methodology of contactless treatment of the biological objects using pulsed magnetic fields is proposed. The eukaryotic micro-organisms Achlya americana and Saprolegnia diclina have been used in the study and magnetic fields up to 7 T were applied, which caused effects similar to irreversible electroporation resulting in the death of the species. The proposed technique is applicable for different types of the biological cells or micro-organisms and possibly can be used in the area of cancer, antifungal treatment and other biotechnological fields.

In this work, designs for planar, interdigitated circular electrode structures for cell membrane permeabilization procedures are analysed using finite element method analysis. The generated electric field intensity, homogeneity, and the Joule heating are evaluated. The optimal electrode configuration for successful transfection procedures is investigated. Based on the simulation results, an optimized design for the electrodes, suitable for the investigation of the permeabilization thresholds during electroporation is proposed. The Joule heating influence simulation results are validated experimentally. [ABSTRACT FROM PUBLISHER]

During high power pulsed magnetic field treatment of biological samples the cells are subjected to both the high magnetic and induced electric fields. The extent of the influence of each treatment component is poorly studied. The work presents the finite element method analysis of pulsed inductive coils that are used for generation of pulsed magnetic and induced electric fields. The simulated coils, electrical parameters and the output characteristics are evaluated in respect to the induced cell transmembrane potential. The model of the Jurkat T lymphocyte cells is introduced in the analysis. The study includes finite element method analysis of four solenoid coils with different structure and inductance in the range of 2.8 µH to 62 µH. Pulsed magnetic field amplitudes up to 5 T are investigated in this work. [ABSTRACT FROM AUTHOR]

Electroporation is an electric field induced phenomenon occurring when the permeability of the cell membrane is increased due to the excess of critical transmembrane potential. Fluorescent dye assays are frequently used for evaluation of the permeabilization rate, however, the protocols vary, which negatively affects the repeatability of the results. In this work we have designed experiments to investigate the protocols and threshold concentrations of the Propidium Iodide (PI) and YO-PRO-1 (YP) fluorescent dyes for evaluation of mammalian cell permeabilization induced by electroporation. The Sp2/0 mouse myeloma cells were used and the bursts of 100 μs × 8 electrical pulses of 0.8-2 kV/cm were applied. It has been shown that the dye concentration has an influence on the detectable permeabilization, and the concentrations below 30 μM for PI and 1 μM for YP should be avoided for measurement of electropermeabilization efficacy due to unreliable fluorescence signals. Further, based on the experimental data, the permeabilization curve for the Sp2/0 myeloma cells in the 0.8-2 kV/cm range has been presented.

Subjection of biological cells to high intensity pulsed electric field results in the permeabilization of the cell membrane. Measurement of the electrical conductivity change allows an analysis of the dynamics of the process, determination of the permeabilization thresholds, and ion efflux influence. In this work a compact electro-permeabilization system for controlled treatment of biological cells is presented. The system is capable of delivering 5 μs - 5 ms repetitive square wave electric field pulses with amplitude up to 1 kV. Evaluation of the cell medium conductivity change is implemented in the setup, allowing indirect measurement of the ion concentration changes occurring due to the cell membrane permeabilization. The simulation model using SPICE and the experimental data of the proposed system are presented in this work. Experimental data with biological cells is also overviewed