Search

We demonstrate here the power and flexibility of free-solution conjugate electrophoresis (FSCE) as a method of separating DNA fragments by electrophoresis with no sieving polymer network. Previous work introduced the coupling of FSCE with ligase detection reaction (LDR) to detect point mutations, even at low abundance compared to the wild-type DNA. Here, four large drag-tags are used to achieve free-solution electrophoretic separation of 19 LDR products ranging in size from 42–66 nt that correspond to mutations in the K-ras oncogene. LDR-FSCE enabled electrophoretic resolution of these 19 LDR-FSCE products by CE in 13.5 minutes (E = 310 V/cm) and by microchip electrophoresis in 140 seconds (E = 350 V/cm). The power of FSCE is demonstrated in the unique characteristic of free-solution separations where the separation resolution is constant no matter the electric field strength. By microchip electrophoresis, the electric field was increased to the maximum of the power supply (E = 700 V/cm), and the 19 LDR-FSCE products were separated in < 70 seconds with almost identical resolution to the separation at E = 350 V/cm. These results will aid the goal of screening K-ras mutations on integrated “sample-in/answer-out” devices with amplification, LDR, and detection all on one platform.

Resolution of DNA fragments separated by electrophoresis in polymer solutions (“matrices”) is determined by both the spacing between peaks and the width of the peaks. Prior research on the development of high-performance separation matrices has been focused primarily on optimizing DNA mobility and matrix selectivity, and gave less attention to peak broadening. Quantitative data are rare for peak broadening in systems in which high electric field strengths are used (> 150 V/cm), which is surprising since capillary and microchip-based systems commonly run at these field strengths. Here, we report results for a study of band broadening behavior for ssDNA fragments on a glass microfluidic chip, for electric field strengths up to 320 V/cm. We compare dispersion coefficients obtained in a poly(N,N-dimethylacrylamide) (pDMA) separation matrix that was developed for chip-based DNA sequencing with a commercially available linear polyacrylamide (LPA) matrix commonly used in capillaries. Much larger DNA dispersion coefficients were measured in the LPA matrix as compared to the pDMA matrix, and the dependences of dispersion coefficient on DNA size and electric field strength were found to differ quite starkly in the two matrices. These observations lead us to propose that DNA migration mechanisms differ substantially in our custom pDMA matrix compared to the commercially available LPA matrix. We discuss the implications of these results in terms of developing optimal matrices for specific separation (microchip or capillary) platforms.

DNA barcodes are short, unique ssDNA primers that "mark" individual biomolecules. To gain better understanding of biophysical parameters constraining primer-dimer formation between primers that incorporate barcode sequences, we have developed a capillary electrophoresis method that utilizes drag-tag-DNA conjugates to quantify dimerization risk between primer-barcode pairs. Results obtained with this unique free-solution conjugate electrophoresis approach are useful as quantitatively precise input data to parameterize computation models of dimerization risk. A set of fluorescently labeled, model primer-barcode conjugates were designed with complementary regions of differing lengths to quantify heterodimerization as a function of temperature. Primer-dimer cases comprised two 30-mer primers, one of which was covalently conjugated to a lab-made, chemically synthesized poly-N-methoxyethylglycine drag-tag, which reduced electrophoretic mobility of ssDNA to distinguish it from ds primer-dimers. The drag-tags also provided a shift in mobility for the dsDNA species, which allowed us to quantitate primer-dimer formation. In the experimental studies, pairs of oligonucleotide primer barcodes with fully or partially complementary sequences were annealed, and then separated by free-solution conjugate CE at different temperatures, to assess effects on primer-dimer formation. When less than 30 out of 30 base-pairs were bonded, dimerization was inversely correlated to temperature. Dimerization occurred when more than 15 consecutive base-pairs formed, yet non-consecutive base-pairs did not create stable dimers even when 20 out of 30 possible base-pairs bonded. The use of free-solution electrophoresis in combination with a peptoid drag-tag and different fluorophores enabled precise separation of short DNA fragments to establish a new mobility shift assay for detection of primer-dimer formation.

We report a capillary-based DNA sequencing read length of 100 bases in 16 min using end-labeled free-solution conjugate electrophoresis (FSCE) with a monodisperse poly-N-substituted glycine (polypeptoid) as a synthetic drag-tag. FSCE enabled rapid separation of single-stranded (ss) DNA sequencing fragments with single-base resolution without the need for a viscous DNA separation matrix. Protein-based drag-tags previously used for FSCE sequencing, for example, streptavidin, are heterogeneous in molar mass (polydisperse); the resultant band-broadening can make it difficult to obtain the single-base resolution necessary for DNA sequencing. In this study, we synthesized and HPLC-purified a 70mer poly-N-(methoxyethyl)glycine (NMEG) drag-tag with a molar mass of - 11 kDa. The NMEG monomers that comprise this peptoid drag-tag are interesting for bioanalytical applications, because the methoxyethyl side chain's chemical structure is reminiscent of the basic monomer unit of polyethylene glycol, a highly biocompatible commercially available polymer, which, however, is not available in monodisperse preparation at an - 11 kDa molar mass. This is the first report of ssDNA separation and of four-color, base-by-base DNA sequencing by FSCE through the use of a chemically synthesized drag-tag. These results show that high-molar mass, chemically synthesized drag-tags based on the polyNMEG structure, if obtained in monodisperse preparation, would serve as ideal drag-tags and could help FSCE reach the commercially relevant read lengths of 100 bases or more.

In 2009, electrophoretically driven DNA separations in slab gels and capillaries have the sepia tones of an old-fashioned technology in the eyes of many, even while they remain ubiquitously used, fill a unique niche, and arguably have yet to reach their full potential. For comic relief, what is old becomes new again: agarose slab gel separations are used to prepare DNA samples for "next-gen" sequencing platforms (e.g. the Illumina and 454 machines) - dsDNA molecules within a certain size range are "cut out" of a gel and recovered for subsequent "massively parallel" pyrosequencing. In this review, we give a Barron lab perspective on how our comprehension of DNA migration mechanisms in electrophoresis has evolved, since the first reports of DNA separations by CE ( approximately 1989) until now, 20 years later. Fused-silica capillaries and borosilicate glass and plastic microchips quietly offer increasing capacities for fast (and even "ultra-fast"), efficient DNA separations. While the channel-by-channel scaling of both old and new electrophoresis platforms provides key flexibility, it requires each unique DNA sample to be prepared in its own micro or nanovolume. This Achilles' heel of electrophoresis technologies left an opening through which pooled sample, next-gen DNA sequencing technologies rushed. We shall see, over time, whether sharpening understanding of transitions in DNA migration modes in crosslinked gels, nanogel solutions, and uncrosslinked polymer solutions will allow electrophoretic DNA analysis technologies to flower again. Microchannel electrophoresis, after a quiet period of metamorphosis, may emerge sleeker and more powerful, to claim its own important niche applications.

By using a microfluidic electrophoresis platform to perform DNA sequencing, genomic information can be obtained more quickly and affordably than the currently employed capillary array electrophoresis (CAE) instruments. Previous research in our group has shown that physically cross-linked, hydrophobically modified polyacrylamide (HMPAM) matrices separate double-stranded DNA (dsDNA) more effectively than linear polyacrylamide (LPA) solutions. Expanding upon this work, we have synthesized a series of linear polyacrylamide-co-dihexylacrylamide (LPA-co-DHA) block copolymers specifically designed to electrophoretically sequence single-stranded DNA (ssDNA) quickly and efficiently on a microfluidic device. By incorporating very small amounts of N,N-dihexylacrylamide, a hydrophobic monomer, these copolymer solutions achieved up to ~10% increases in average DNA sequencing read length over LPA homopolymer solutions of matched molar mass. Additionally, the inclusion of the small amount of hydrophobe does not significantly increase the polymer solution viscosities, relative to LPA solutions, so that channel loading times between the copolymers and the homopolymers are similar. The resulting polymer solutions are capable of providing enhanced sequencing separations in a short period of time without compromising the ability to rapidly load and unload the matrix from a microfluidic device.

Miniaturization of capillary electrophoresis onto a microchip for forensic short tandem repeat analysis is the initial step in the process of producing a fully integrated and automated analysis system. A prototype of the Berkeley microfabricated capillary array electrophoresis device was installed at the Virginia Department of Forensic Science for testing. Instrument performance was verified by PowerPlex® 16 System profiling of single source, sensitivity series, mixture, and casework samples. Mock sexual assault samples were successfully analyzed using the PowerPlex Y System. Resolution was assessed using the TH01, CSF1PO, TPOX, and Amelogenin loci and demonstrated to be comparable with commercial systems along with the instrument precision. Successful replacement of the Hjerten capillary coating method with a dynamic coating polymer was performed. The accurate and rapid typing of forensic samples demonstrates the successful technology transfer of this device into a practitioner laboratory and its potential for advancing high-throughput forensic typing.

We have studied the effects of polymer molar mass and concentration on the electrophoretic migration modalities of individual molecules of DNA in LPA, HEC, and PEO solutions via epifluorescent videomicroscopy. While both transient entanglement coupling (TEC) and reptation have been studied in the past, the transition between them has not. Understanding this transition will allow for polymer network properties to be optimized to enhance the speed and resolution of DNA separations in microfluidic devices. Near the overlap threshold concentration, C*, TEC is the dominant observed mode of DNA migration, and the observation frequency of TEC increases with increasing polymer molar mass. As polymer concentration is increased, observed TEC events reduce to zero while DNA reptation events become the only detected mechanism. Individual DNA molecules undergoing both migration mechanisms were counted in solutions of varying polymer molar masses and concentrations and were plotted against a dimensionless polymer concentration, C/C*. The data for LPA reduce to form universal curves with a sharp increase in DNA reptation at approximately 6.5C*. Analogous transition concentrations for PEO and HEC were observed at 5C* and 3.5C*, respectively, reflecting the different physical properties of these polymers. This transition correlates closely with the polymer network entanglement concentration, Ce, as measured by rheological techniques. The electrophoretic mobility of lambda-DNA in LPA polymer solutions was also measured and shows how a balance can be struck between DNA resolution and separation speed by choosing the desired prevalence of DNA reptation.

We report a new, bioconjugate approach to performing highly multiplexed single-base extension (SBE) assays, which we demonstrate by genotyping a large panel of point mutants in exons 5-9 of the p53 gene. A series of monodisperse polyamide "drag-tags" was created using both chemical and biological synthesis and used to achieve the high-resolution separation of genotyping reaction products by microchannel electrophoresis without a polymeric sieving matrix. A highly multiplexed SBE reaction was performed in which 16 unique drag-tagged primers simultaneously probe 16 p53 gene loci, with an abbreviated thermal cycling protocol of only 9 min. The drag-tagged SBE products were rapidly separated by free-solution conjugate electrophoresis (FSCE) in both capillaries and microfluidic chips with genotyping accuracy in excess of 96%. The separation requires less than 70 s in a glass microfluidic chip, or about 20 min in a commercial capillary array sequencing instrument. Compared to gel electrophoresis, FSCE offers greater freedom in the design of SBE primers by essentially decoupling the length of the primer and the electrophoretic mobility of the genotyping products. FSCE also presents new possibilities for the facile implementation of SBE on integrated microfluidic electrophoresis devices for rapid, high-throughput genetic mutation detection or SNP scoring.

As the understanding of the links between genetic mutations and diseases continues to grow, there is an increasing need for techniques that can rapidly, inexpensively, and sensitively detect DNA sequence alterations. Typically, such analyses are performed on PCR-amplified gene regions. Automated DNA sequencing by capillary array electrophoresis can be used, but is expensive to apply to large numbers of patient samples and/or large genes, and may not always reveal low-abundance mutations in heterozygous samples. Many different types of genetic differences need to be detected, including single-base substitutions and larger sequence alterations such as insertions, deletions, and inversions. Electrophoretic mobility shift assays seem well suited to this purpose and could be used for the efficient screening of patient samples for sequence alterations, effectively reducing the number of samples that must be subjected to full and careful sequencing. While there is much promise, many of the mobility shift assays presently under development have yet to be demonstrated to have the high sensitivity and specificity of mutation detection required for routine clinical application. Hence, further studies and optimization are required, in particular the application of these methods not only to particular genes but also to large numbers of patient samples in blinded studies aimed at the rigorous determination of sensitivity and specificity. This review examines the state-of-the-art of the most commonly used mobility shift assays for mutation detection, including denaturing gradient gel electrophoresis, TGGE, SSCP, heteroduplex analysis, and denaturing HPLC.

We describe a novel class of DNA separation media for microchip electrophoresis, "physically cross-linked" block copolymer networks, which provide rapid (4.5 min) and remarkably enhanced resolution of DNA in a size range critical for genotyping. Linear poly(acrylamide-co-dihexylacrylamide) (LPA-co-DHA) comprising as little as 0.13 mol % dihexylacrylamide yields substantially improved electrophoretic DNA separations compared to matched molar mass linear polyacrylamide. Single-molecule videomicroscopic images of DNA electrophoresis reveal novel chain dynamics in LPA-co-DHA matrixes, resembling inchworm movement, to which we attribute the increased DNA resolution. Substantial improvements in DNA peak separation are obtained, in particular, in LPA-co-DHA solutions at polymer/copolymer concentrations near the interchain entanglement threshold. Higher polymer concentrations yield enhanced separations only for small DNA molecules (120 base pairs). Hydrophobically cross-linked networks offer advantages over conventional linear polymers based on enhanced separation performance (or speed) and over chemically cross-linked gels because hydrophobic cross-links can be reversibly broken, allowing facile microchannel loading.

In end-labeled free-solution electrophoresis (ELFSE), DNA molecules are labeled with a frictional modifier or "drag-tag", allowing their size-based electrophoretic separation in free solution. Among the interesting observations from early work with dsDNA using streptavidin as a drag-tag was that the drag induced by including a streptavidin label at both ends was significantly more than double that from a single streptavidin (Heller, C. et al.., J. Chromatogr. A 1998, 806, 113-121). This finding was assumed to be in error, and subsequent work focused on experiments in which only a single drag-tag is appended to one end of the DNA molecule. Recent theoretical work (McCormick, L. C., Slater, G. W., Electrophoresis 2005, 26, 1659-1667) has examined the contribution of end-effects to the free-solution electrophoretic mobility of charged-uncharged polymer conjugates, reopening the question of enhanced drag from placing a drag-tag at both ends. In this study, this effect is investigated experimentally, using custom-synthesized ssDNA oligonucleotides allowing the attachment of drag-tags to one or both ends, as well as dsDNA PCR products generated with primers appropriate for the attachment of drag-tags at one or both ends. A range of sizes of drag-tags are used, including synthetic polypeptoid drag-tags as well as genetically engineered protein polymer drag-tags. The enhanced drag arising from labeling both ends has been confirmed, with 6-9% additional drag for the ssDNA and 10-23% additional drag for the dsDNA arising from labeling both ends than would be expected from simply doubling the size of the drag-tag at one end. The experimental results for ssDNA labeled at both ends are compared to the predictions of the recent theory of end-effects, with reasonably good quantitative agreement. These experimental findings demonstrate the feasibility of enhancing ELFSE separations by labeling both ends of the DNA molecule, leading to greater resolving power and a wider range of applications for this technique.

We demonstrate the feasibility of end-labeled free-solution electrophoresis (ELFSE) separation of DNA using genetically engineered protein polymers as drag-tags. Protein polymers are promising candidates for ELFSE drag-tags because their sequences and lengths are controllable not only to generate monodisperse polymers with high frictional drag, but also to meet other drag-tag requirements for high-resolution separations by microchannel electrophoresis. A series of repetitive polypeptides was designed, expressed in Escherichia coli, and purified. By performing an end-on conjugation of the protein polymers to a fluorescently labeled DNA oligomer (22 bases) and analyzing the electrophoretic mobilities of the conjugate molecules by free-solution capillary electrophoresis (CE), effects of the size and charge of the protein polymer drag-tags were investigated. In addition, the electrophoretic behavior of bioconjugates comprising relatively long DNA fragments (108 and 208 bases) and attached to uncharged drag-tags was observed, by conjugating fluorescently labeled polymerase chain reaction (PCR) products to charge-neutral protein polymers, and analyzing via CE. We calculated the amount of friction generated by the various drag-tags, and estimated the potential read-lengths that could be obtained if these drag-tags were used for DNA sequencing in our current system. The results of these studies indicate that larger and uncharged drag-tags will have the best DNA-resolving capability for ELFSE separations, and that theoretically, up to 233 DNA bases could be sequenced using one of the protein polymer drag-tags we produced, which is electrostatically neutral with a chain length of 337 amino acids. We also show that denatured (unfolded) polypeptide chains impose much greater frictional drag per unit molecular weight than folded proteins, such as streptavidin, which has been used as a drag-tag before.

DNA is a free-draining polymer. This subtle but "unfortunate" property of highly charged polyelectrolytes makes it impossible to separate nucleic acids by free-flow electrophoresis. This is why one must typically use a sieving matrix, such as a gel or an entangled polymer solution, in order to obtain some electrophoretic size separation. An alternative approach consists of breaking the charge to friction balance of free-draining DNA molecules. This can be achieved by labeling the DNA with a large, uncharged molecule (essentially a hydrodynamic parachute, which we also call a drag-tag) prior to electrophoresis; the resulting methodology is called end-labeled free-solution electrophoresis (ELFSE). In this article, we review the development of ELFSE over the last decade. In particular, we examine the theoretical concepts used to predict the ultimate performance of ELFSE for single-stranded (ssDNA) sequencing, the experimental results showing that ELFSE can indeed overcome the free-draining issue raised above, and the technological advances that are needed to speed the development of competitive ELFSE-based sequencing and separation technologies. Finally, we also review the reverse process, called free-solution conjugate electrophoresis (FSCE), wherein uncharged polymers of different sizes can be analyzed using a short DNA molecule as an electrophoretic engine.

We have developed sparsely cross-linked "nanogels", sub-colloidal polymer structures composed of covalently linked, linear polyacrylamide chains, as novel DNA sequencing matrices for capillary electrophoresis. The presence of covalent cross-links affords nanogel matrices with enhanced network stability relative to standard, linear polyacrylamide (LPA), improving the separation of large DNA fragments. Nanogels were synthesized via inverse emulsion (water-in-oil) copolymerization of acrylamide and N,N-methylenebisacrylamide (Bis). In order to retain the fluidity necessary in a replaceable polymer matrix for capillary array electrophoresis (CAE), a low percentage of the Bis cross-linker (10(-4) mol%) was used. Nanogels were characterized by multiangle laser light scattering and rheometry, and were tested for DNA sequencing by CAE with four-color laser-induced fluorescence (LIF) detection. The properties and performance of nanogel matrices were compared to those of a commercially available LPA network, which was matched for both weight-average molar mass (Mw) and extent of interchain entanglements (c/c*). Nanogels presented in this work have an average radius of gyration of 226 nm and a weight-average molar mass of 8.8 x 10(6) g/mol. At concentrations above the overlap threshold, nanogels form a clear, viscous solution, similar to the LPA matrix (Mw approximately 8.9 x 10(6) g/mol). The two matrices have similar flow and viscosity characteristics. However, because of the physical network stability provided by the internally cross-linked structure of the nanogels, a substantially longer read length ( approximately 63 bases, a 10.4% improvement) is obtained with the nanogel matrix at 98.5% accuracy of base-calling. The nanogel network provides higher-selectivity separation of ssDNA sequencing fragments longer than 375 bases. Moreover, nanogel matrices require 30% less polymer per unit volume than LPA. This is the first report of a sequencing matrix that provides better performance than LPA, in a side-by-side comparison of polymer matrices matched for Mw and extent of interchain entanglements.

Physically adsorbed (dynamic) polymeric wall coatings for microchannel electrophoresis have distinct advantages over covalently linked coatings. In order to determine the critical factors that control the formation of dynamic wall coatings, we have created a set of model polymers and copolymers based on N,N-dimethylacrylamide (DMA) and N,N-diethylacrylamide (DEA), and studied their adsorption behavior from aqueous solution as well as their performance for microchannel electrophoresis of DNA. This study is revealing in terms of the polymer properties that help create an "ideal" wall coating. Our measurements indicate that the chemical nature of the coating polymer strongly impacts its electroosmotic flow (EOF) suppression capabilities. Additionally, we find that a critical polymer chain length is required for polymers of this type to perform effectively as microchannel wall coatings. The effective mobilities of double-stranded (dsDNA) fragments within dynamically coated capillaries were determined in order to correlate polymer hydrophobicity with separation performance. Even for dsDNA, which is not expected to be a strongly adsorbing analyte, wall coating hydrophobicity has a deleterious influence on separation performance.

Technologies that allow for high-throughput, economical, and accurate single nucleotide polymorphism (SNP) genotyping are becoming crucial for modern genomic efforts. Here, we present a method for multiplexed single-base extension (SBE) genotyping that takes advantage of the unique separation modalities made possible via end-labeled free-solution electrophoresis (ELFSE). Three unique SBE oligonucleotide primers, which probe for mutations of clinical importance in the human p53 gene, were covalently conjugated to three unique polypeptoid frictional end labels and mixed together. This primer-polypeptoid conjugate cocktail was then used in a multiplexed SBE reaction followed by free-solution separation in a 96-capillary array electrophoresis (CAE) instrument. The study was designed to demonstrate multiplexed SNP genotyping of several loci in a single reaction and a single subsequent analysis. Further, the electrophoretic analysis was conducted without any viscous polymeric separation media, was complete in less than 10 min, and can be implemented in any capillary or microfluidic electrophoretic system with four-color fluorescent detection capabilities. Multiplexed SBE-ELFSE genotyping analysis resulted in the simultaneous and accurate genotyping of three p53 loci on five different DNA templates in a single reaction set and single CAE analysis. With the implementation of this method in 96 or more capillaries in parallel, high-throughput screening of SNPs will be accessible to a large number of laboratories.

The ability of a polymer matrix to separate DNA by capillary electrophoresis (CE) is strongly dependent upon polymer physical properties. In particular, recent results have shown that DNA sequencing performance is very sensitive to both the average molar mass and the average coil radius of the separation matrix polymers, which are affected by both polymer structure and polymer-solvent affinity. Large polymers with high average molar mass provide the best DNA sequencing separations for CE, but are also the most challenging to characterize with accuracy. The methods most commonly used for the characterization of water-soluble polymers with application in microchannel electrophoresis have been gel permeation chromatography (GPC) and intrinsic viscosity measurements, but the limitations and potential inaccuracies of these approaches, particularly for large or novel polymers and copolymers, press the need for a more universally accurate method of polymer molar mass profiling for advanced DNA separation matrices. Here, we show that multi-angle laser light scattering (MALLS) measurements, carried out either alone or in tandem with prior on-line sample fractionation by GPC, can provide accurate molar mass and coil radius information for polymer samples that are useful for DNA sequencing by CE. Wider employment of MALLS for characterization of novel polymers designed as DNA separation matrices for microchannel electrophoresis should enable more rapid optimization of matrix properties and formulation, and assist in the development of novel classes of polymer matrices.

We recently demonstrated that the molecular mass distribution of an uncharged polymer sample can be analyzed using free-solution capillary electrophoresis of DNA-polymer conjugates. In these conjugates, the DNA is providing the electromotive force while the uncharged polydisperse polymer chains of the sample retard the DNA engine with different amounts of hydrodynamic drag. Here we present a theoretical model of this new analytical method. We show that for the most favourable, diffusion-limited electrophoresis conditions, there is actually an optimal DNA size to achieve the separation of a given polymer sample. Moreover, we demonstrate that the effective friction coefficient of the polymer chains is related to the stiffness of the two polymers of the conjugate, thus offering a method to estimate the persistence length of the uncharged polymer through mobility measurements. Finally, we compare some of our predictions with available experimental results.

The molar mass distribution of a polymer sample is a critical determinant of its material properties and is generally analyzed by gel permeation chromatography or more recently, by MALDI-TOF mass spectrometry. We describe here a novel method for the determination of the degree of polymerization of polydisperse, uncharged, water-soluble polymers (e.g., poly(ethylene glycol) (PEG)), based upon single-monomer resolution of DNA−polymer conjugates by free-solution capillary electrophoresis. This is accomplished by end-on covalent conjugation of a polydisperse, uncharged polymer sample (PEG) to a monodisperse, fluorescently labeled DNA oligomer, followed by electrophoretic analysis. The monodisperse, charged DNA “engine” confers to each conjugate an equal amount of electromotive force, while the varying contour lengths of the uncharged, polydisperse polymers engender different amounts of hydrodynamic drag. The balance of electromotive and hydrodynamic forces enables rapid, high-resolution separation of the DNA−...

The electrophoretic separation of DNA molecules is usually performed in thin slabs of agarose or polyacrylamide gel. However, DNA separations can be achieved more rapidly and efficiently within a microbore fused silica capillary filled with an uncrosslinked polymer solution. An early assumption was that the mechanism of DNA separation in polymer solution-capillary electrophoresis (PS-CE) is the same as that postulated to occur in slab gel electrophoresis, i.e., that entangled polymer chains form a network of pores through which the DNA migrates. However, we have demonstrated that large DNA restriction fragments (2.0-23.1 kbp) can be separated by CE in extremely dilute polymer solutions, which contain as little as 6 parts per million [0.0006% (w/w)] of uncrosslinked hydroxyethyl cellulose (HEC) polymers. In such extremely dilute HEC solutions, far below the measured polymer entanglement threshold concentration, pore-based models of DNA electrophoresis do not apply. We propose a transient entanglement coupling mechanism for the electrophoretic separation of DNA in uncrosslinked polymer solutions, which is based on physical polymer/DNA interactions.

Previous studies (Barron et al., 1993, 1994) have shown that dilute aqueous solutions of hydroxyethylcellulose (HEC) polymers provide an excellent alternative to gel-based DNA separation media for capillary electrophoresis (CE) of DNA restriction fragments (72−23 130 base pairs). DNA separation by CE in HEC solutions is strongly influenced by the average HEC molecular weight as well as by the HEC concentration in the electrophoresis buffer. Here we describe a systematic investigation of the effects of a mixture of low- and high-molecular weight HEC polymers, over a range of concentrations, to form a DNA separation medium with a broad range of polymer chain lengths. Our results show that, relative to separation media containing solely low-molecular-weight or high-molecular-weight HEC polymers, the mixed polymer solutions provide superior separation over the DNA size range of interest, while providing a five-fold viscosity reduction. The addition of a very small amount of high-molecular-weight HEC to a solu...

We show that both uncoated and polyacrylamide-coated capillaries provide separation of large DNA restriction fragments (2.0-23.1 kbp) by capillary electrophoresis in dilute cellulosic polymer solutions. Uncoated capillaries, however, provide significantly better resolution of DNA fragments, particularly when ultra-dilute polymer solutions are used. This is because electroosmotic flow in uncoated capillaries increases the residence time of DNA in the capillary, without significantly contributing to band-broadening. At a given field strength and polymer concentration in the buffer, the electrophoretic mobilities of DNA restriction fragments in coated capillaries are virtually identical to those previously measured in uncoated capillaries. It is concluded that the fused silica surface of the capillary does not play a significant role in the mechanism of DNA separation by capillary electrophoresis in uncrosslinked polymer solutions. Thus, the separation of large DNA which has been observed to occur in ultra-dilute polymer solutions arises primarily from entanglement interactions between the cellulosic polymers and DNA restriction fragments which occur within the bulk of the polymer solution.

In this review we evaluate existing experimental methods for the electrophoretic size separation of nucleic acids, including both slab gel electrophoresis and capillary electrophoresis (CE). First, we briefly discuss some important applications of DNA electrophoresis in molecular biology. We then focus on the theory and the practice of DNA separations by slab gel electrophoresis and CE, emphasizing the different practical limitations of the two techniques. In particular, we review new developments in CE, a technique which is evolving rapidly.

Using capillary electrophoresis, large DNA molecules (2.0–23.1 kbp) may be rapidly separated in ultradilute polymer solutions (< 0.002% w/w) under, a high-voltage, steady field (265 V/cm). At this polymer concentration, the separation mechanism appears to be significantly different from that postulated to occur in crosslinked gels. Based on experimental results obtained with DNA restriction fragments and with negatively charged latex microspheres, we conclude that the Ogston and reptation models typically used to describe gel electrophoresis are not appropriate for DNA separations in such dilute polymer solutions. Electrophoresis experiments employing solutions of both small and large hydroxyethyl cellulose polymers highlight the importance of polymer length and concentration for the optimum resolution of DNA fragments varying in size from 72 bp to 23.1 kbp. A transient entanglement coupling mechanism for DNA separation in dilute polymer solutions is developed, which suggests that there is no a priori upper size limit to DNA that can be separated by capillary electrophoresis in a constant field.

Free-solution conjugate electrophoresis (FSCE) is a method of DNA sequencing that eliminates the need for viscous polymer solutions by tethering a carefully designed, mobility modifying "drag-tag" to each DNA molecule to achieve size-based separations of DNA. The most successful drag-tags to date are genetically engineered, highly repetitive polypeptides ("protein polymers") that are designed to be large, water-soluble, and completely monodisperse. Positively charged arginines were deliberately introduced at regular intervals into the amino acid sequence to increase the hydrodynamic drag without increasing drag-tag length. Additionally, a one-step purification method that combines affinity chromatography and on-column tag cleavage was devised to achieve the required drag-tag monodispersity. Sequencing with a read length of approximately 180 bases was successfully achieved with a known sequence in free-solution electrophoresis using one of these positively charged drag-tags. This preliminary result is expected to lead to further progress in FSCE sequencing with ~400 bases read length possible when more "highly" positively charged protein polymers of larger size are generated with the intein system.

Protein-based polymers are increasingly being used in biomaterial applications because of their ease of customization and potential monodispersity. These advantages make protein polymers excellent candidates for bioanalytical applications. Here we describe improved methods for producing drag-tags for free-solution conjugate electrophoresis (FSCE). FSCE utilizes a pure, monodisperse recombinant protein, tethered end-on to a ssDNA molecule, to enable DNA size separation in aqueous buffer. FSCE also provides a highly sensitive method to evaluate the polydispersity of a protein drag-tag and thus its suitability for bioanalytical uses. This method is able to detect slight differences in drag-tag charge or mass. We have devised an improved cloning, expression, and purification strategy that enables us to generate, for the first time, a truly monodisperse 20 kDa protein polymer and a nearly monodisperse 38 kDa protein. These newly produced proteins can be used as drag-tags to enable longer read DNA sequencing by free-solution microchannel electrophoresis.

Double-stranded (ds) DNA fragments over a wide size range were successfully separated in blended polymer matrices by microfluidic chip electrophoresis. Novel blended polymer matrices composed of two types of polymers with three different molar masses were developed to provide improved separations of large dsDNA without negatively impacting the separation of small dsDNA. Hydroxyethyl celluloses (HECs) with average molar masses of ~27 kDa and ~1 MDa were blended with a second class of polymer, high-molar mass (~7 MDa) linear polyacrylamide (LPA). Fast and highly efficient separations of commercially available DNA ladders were achieved on a borosilicate glass microchip. A distinct separation of a 1 Kb DNA extension ladder (200 bp to 40,000 bp) was completed in 2 minutes. An orthogonal Design of Experiments (DOE) was used to optimize experimental parameters for DNA separations over a wide size range. We find that the two dominant factors are the applied electric field strength and the inclusion of a high concentration of low-molar mass polymer in the matrix solution. These two factors exerted different effects on the separations of small dsDNA fragments below 1 kbp, medium dsDNA fragments between 1 kbp and 10 kbp, and large dsDNA fragments above 10 kbp.

Thermo-responsive polymer “nanogels” (crosslinked hydrogel particles with sub-100 nm diameters) are intriguing for many potential applications in biotechnology and medicine. There have been relatively few reports of electrostatically neutral, thermosensitive nanogels comprising a high fraction of hydrophilic co-monomer. Here we demonstrate the syntheses and characterization of novel, nonionic nanogels based on random N,N-diethylacrylamide (DEA) / N,N-dimethylacrylamide (DMA) copolymers, made by free-radical, surfactant-free dispersion polymerization. The volume phase transition temperatures of these DEA/DMA nanogels are strongly affected by co-monomer composition, providing a way to “tune” the phase transition temperature of these non-ionic nanogels. While DEA nanogels (comprising no DMA) can be obtained at 70°C by standard emulsion precipitation, DEA/DMA random copolymer nanogels can be obtained only in a particular range of temperatures, above the initial phase transition temperature and below the critical precipitation temperature of the DEA/DMA copolymer, controlled by co-monomer composition. Increasing percentages of DMA in the nanogels raises the phase transition temperature, and attenuates and broadens it as well. We find that concentrated DEA/DMA nanogel dispersions are optically clear at room temperature. This good optical clarity was exploited for their use in a novel DNA sieving matrix for microfluidic chip electrophoresis. An ultrafast, high-efficiency dsDNA separation was achieved in less than 120 seconds for dsDNA ranging from 75 bp-15000 bp.

Electrophoretic DNA sequencing without a polymer matrix is currently possible only with the use of some kind of “drag-tag” as a mobility modifier. In Free-Solution Conjugate Electrophoresis (FSCE), a drag-tag attached to each DNA fragment breaks linear charge-to-friction scaling, enabling size-based separation in aqueous buffer alone. Here, we report a 265-base read for free-solution DNA sequencing by capillary electrophoresis using a random-coil protein drag-tag of unprecedented length and purity. We identified certain methods of protein expression and purification that allow the production of highly monodisperse drag-tags as long as 516 amino acids, which are almost charge neutral (+1 to +6) and yet highly water-soluble. Using a four-color LIF detector, 265 bases could be read in 30 minutes with a 267-amino acid drag-tag, on par with the average read of current next-gen sequencing systems. New types of multichannel systems that allow much higher throughput electrophoretic sequencing should be much more accessible in the absence of a requirement for viscous separation matrix.

Here, we demonstrate the potential for high-resolution electrophoretic separations of ssDNA-protein conjugates in borosilicate glass microfluidic chips, with no sieving media and excellent repeatability. Using polynucleotides of two different lengths conjugated to moderately cationic protein polymer drag-tags, we measured separation efficiency as a function of applied electric field. In excellent agreement with prior theoretical predictions of Slater et al., resolution is found to remain constant as applied field is increased up to 700 V/cm, the highest field we were able to apply. This remarkable result illustrates the fundamentally different physical limitations of free-solution conjugate electrophoresis (FSCE)-based DNA separations relative to matrix-based DNA electrophoresis. ssDNA separations in "gels" have always shown rapidly declining resolution as the field strength is increased; this is especially true for ssDNA > 400 bases in length. FSCE's ability to decouple DNA peak resolution from applied electric field suggests the future possibility of ultra-rapid FSCE sequencing on chips. We investigated sources of peak broadening for FSCE separations on borosilicate glass microchips, using six different protein polymer drag-tags. For drag-tags with four or more positive charges, electrostatic and adsorptive interactions with poly(N-hydroxyethylacrylamide)-coated microchannel walls led to appreciable band-broadening, while much sharper peaks were seen for bioconjugates with nearly charge-neutral protein drag-tags.

We demonstrate the first use of a non-natural, genetically engineered protein polymer drag-tag to sequence DNA fragments by end-labeled free-solution electrophoresis (ELFSE). Fluorescently labeled DNA fragments resulting from the Sanger cycle sequencing reaction were separated by free-solution capillary electrophoresis, with much higher resolution and cleaner results than previously reported for this technique. With ELFSE, size-based separation of DNA in the absence of a sieving matrix is enabled by the end-on attachment of a polymeric "drag-tag" that modifies the charge-to-friction ratio of DNA in a size-dependent fashion. Progress in ELFSE separations has previously been limited by the lack of suitable large, monodisperse drag-tags. To address this problem, we designed, constructed, cloned, expressed, and purified a non-natural, genetically engineered 127mer protein polymer for use as an ELFSE drag-tag. The Sanger cycle sequencing reaction is performed with the drag-tag covalently attached to the sequencing primer, a major advance over previous strategies for ELFSE sequencing. The electrophoretic separation is diffusion-limited, without significant adsorption of the drag-tag to capillary walls. Although the read length (at about 180 bases) is still short, our results provide evidence that larger protein polymer drag-tags, currently under development, could extend the read length of ELFSE to more competitive levels. ELFSE offers the possibility of very rapid DNA sequencing separations without any of the difficulties associated with viscous polymeric sieving networks and hence will be amenable to implementation in microchannel and chip-based electrophoresis systems.

Although a finished human genome reference sequence is now available, the ability to sequence large, complex genomes remains critically important for researchers in the biological sciences, and in particular, continued human genomic sequence determination will ultimately help to realize the promise of medical care tailored to an individual's unique genetic identity. Many new technologies are being developed to decrease the costs and to dramatically increase the data acquisition rate of such sequencing projects. These new sequencing approaches include Sanger reaction-based technologies that have electrophoresis as the final separation step as well as those that use completely novel, nonelectrophoretic methods to generate sequence data. In this review, we discuss the various advances in sequencing technologies and evaluate the current limitations of novel methods that currently preclude their complete acceptance in large-scale sequencing projects. Our primary goal is to analyze and predict the continuing role of electrophoresis in large-scale DNA sequencing, both in the near and longer term.

The development of innovative technologies designed to reduce the cost and increase the throughput of DNA separations continues to be important for large-scale sequencing and genotyping efforts. We report research aimed at the further development of a free-solution bioconjugate method of DNA size separation by capillary electrophoresis (CE), in particular, the determination of an optimal molecular architecture for polyamide-based "drag-tags". We synthesized several branched poly(N-methoxyethyl glycine)s (poly(NMEG)s, a class of polypeptoids) as novel friction-generating entities for end-on attachment to DNA molecules. A 30-mer poly(NMEG) "backbone," comprising five evenly spaced reactive epsilon-amino groups, was synthesized on solid phase, cleaved, and purified to monodispersity by RP-HPLC. Three different comblike derivatives of this backbone molecule were created by (1) acetylating the epsilon-amino groups or (2) appending small, monodisperse NMEG oligomers (a tetramer and an octamer). Grafting of the oligo(NMEG)s was done using solution-phase amide bond formation chemistry. Once purified to total monodispersity, the three different drag-tags were studied by free-solution electrophoresis to observe the effect of branching on their hydrodynamic drag or "alpha" and hence their ability to separate DNA. Drag was found to scale linearly with total molecular weight, regardless of branch length. The octamer-branched drag-tag-DNA conjugate was used to separate ssDNA products of 50, 75, 100, and 150 bases in length by free-solution CE in less than 10 min. Hence, the use of branched or comblike drag-tags is both a feasible and an effective way to achieve high frictional drag, allowing the high-resolution separation of relatively large DNA molecules by free-solution CE without the need to synthesize very long polymers.

We have created a family of water-soluble block copolymers of acrylamide and N-alkylacrylamides that are designed to selectively remove proteins from DNA via microchannel electrophoresis. It was hypothesized that the inclusion of hydrophobic subunits in the polymer chain, in sufficient concentration, could lead to protein adsorption due to hydrophobic interactions. A series ofN-alkylacrylamide comonomers with varying alkyl chain lengths (C4, C6, C8) and also an N,N-dialkyl group (C6-C6) were synthesized via reactions between acryloyl chloride and the respective alkylamines. Copolymers were synthesized using an aqueous "micellar" polymerization technique, which involves dissolving acrylamide in the aqueous phase while hydrophobic monomers are solubilized in sodium dodecyl sulfate micelles. Copolymers comprising up to 4 mol % of a hydrophobic subunit (as verified by (1)H NMR) were synthesized. Polymer molecular weights were determined by tandem gel permeation chromatography-multiangle laser light scattering, and ranged from 1.5 x 10(6) to 4.3 x 10(6). Capillary electrophoresis analysis of bovine serum albumin and beta-lactoglobulin migration in these matrixes revealed that the octylacrylamide and dihexylacrylamide copolymers show the most significant extent of protein adsorption while butylacrylamides show no noteworthy adsorption trend. All copolymer matrixes studied allowed the passage of a dsDNA digest, and displayed some DNA sieving ability at 0.5% (w/w) in TTE (50 mM Tris, 50 mM TAPS, 2 mM EDTA, pH 8.4) buffer. These matrixes are demonstrated in on-chip experiments to adsorb protein, in a step toward meeting the front-end processing goals of mu-TAS for genetic analysis applications.

We have developed a novel class of thermogelling polymer networks based on poly-N-alkoxyalkylacrylamides, and demonstrated their use as DNA sequencing matrices for high-throughput microchannel electrophoresis in capillary arrays. Polymers and copolymers of N-ethoxyethylacrylamide (NEEA) and N-methoxyethylacrylamide (NMEA) were synthesized by aqueous-phase free-radical polymerization and characterized by tandem gel permeation chromatography-multi-angle laser light scattering. These copolymer matrices exhibit "re-entrant"-type volume phase transitions, forming entangled networks with high shear viscosity at low (20 degrees C) and high (35 degrees C) temperatures, and undergoing a "coil-to-globular", lower critical solution temperature (LCST)-like phase transition over an intermediate temperature range (20-35 degrees C). Hence, matrix viscosity is relatively low at room temperature (25 degrees C), and increases rapidly above 35 degrees C. The material properties and phase behavior of these thermogelling polymer networks were studied by steady-shear rheometry. These matrices are easily loaded into capillary arrays at room temperature while existing as viscous fluids, but thermogel above 35 degrees C to form transparent hydrogels via a thermo-associative phase transition. The extent of the intermediate viscosity drop and the final viscosity increase depends on the composition of the copolymers. DNA sequencing by capillary array electrophoresis with four-color laser-induced fluorescence (LIF) detection shows that these thermogelling networks provide enhanced resolution of both small and large DNA sequencing fragments and longer sequencing read lengths, in comparison to appropriate control (closely related, nonthermogelling) polymer networks. In particular, a copolymer comprised of 90% w/w NMEA and 10% w/w NEEA, with a molecular mass of approximately 2 MDa, delivers around 600 bases at 98.5% base-calling accuracy in 100 min of electrophoresis.

Electrophoresis in microfluidic devices is becoming a useful analytical platform for a variety of biological assays. In this report, we present a method that allows for an increased sensitivity of detection of fluorescent molecules in microfluidic electrophoresis devices. This capability is provided by the implementation of a particular buffer system that is designed to initially function in an isotachophoretic (ITP) mode and, then after a controlled amount of electric current has been applied to the system, to transition to a zone electrophoretic mode. In the initial ITP mode, analytes dissolved in a large volume of injected sample are concentrated into a single narrow zone. After application of a sufficient and adjustable amount of electric current, the system switches into a zone electrophoretic mode, where the concentrated analytes are separated according to their electrophoretic mobilities. Application of this tandem ITP-zone electrophoretic strategy to the concentration, separation, and detection of fluorescent reporter molecules in a standard microfluidic device results in an approximately 50-fold increase in detection sensitivity relative to equivalent separations that are obtained with zone electrophoresis alone. Even with very long initial sample plugs (up to 3000 microm), this strategy produces electrophoretic separations with high resolutions and peak efficiencies. This strategy can be implemented to increase detection sensitivity in any standard microfluidic electrophoresis platform and does not require any specialized hardware or microchannel configurations.

We present the polymer poly-N-hydroxyethylacrylamide (PHEA) (polyDuramide) as a novel, hydrophilic, adsorbed capillary coating for electrophoretic protein analysis. Preparation of the PHEA coating requires a simple and fast (30 min) protocol that can be easily automated in capillary electrophoresis instruments. Over the pH range of 3-8.4, the PHEA coating is shown to reduce electroosmotic flow (EOF) by about 2 orders of magnitude compared to the bare silica capillary. In a systematic comparative study, the adsorbed PHEA coating exhibited minimal interactions with both acidic and basic proteins, providing efficient protein separations with excellent reproducibility on par with a covalent polyacrylamide coating. Hydrophobic interactions between proteins and a relatively hydrophobic poly-N,N-dimethylacrylamide (PDMA) adsorbed coating, on the other hand, adversely affected separation reproducibility and efficiency. Under both acidic and basic buffer conditions, the adsorbed PHEA coating produced an EOF suppression performance comparable to that of covalent polyacrylamide coating and superior to that of adsorbed PDMA coating. The protein separation performance in PHEA-coated capillaries was retained for 275 consecutive protein separation runs at pH 8.4, and for more than 800 runs at pH 4.4. The unique and novel combination of hydrophilicity and adsorptive coating ability of PHEA makes it a suitable wall coating for automated microscale analysis of proteins by capillary array systems.

The necessity for microchannel wall coatings in capillary and chip-based electrophoretic analysis of biomolecules is well understood. The regulation or elimination of EOF and the prevention of analyte adsorption is essential for the rapid, efficient separation of proteins and DNA within microchannels. Microchannel wall coatings and other wall modifications are especially critical for protein separations, both in fused-silica capillaries, and in glass or polymeric microfluidic devices. In this review, we present a discussion of recent advances in microchannel wall coatings of three major classes – covalently linked polymeric coatings, physically adsorbed polymeric coatings, and small molecule additives. We also briefly review modifications useful for polymeric microfluidic devices. Within each category of wall coatings, we discuss those used to eliminate EOF, to tune EOF, to prevent analyte adsorption, or to perform multiple functions. The knowledgeable application of the most promising recent developments in this area will allow for the separation of complex protein mixtures and for the development of novel microchannel wall modifications.

We present a "proof-of-concept" study showing that a blend of thermo-responsive and nonthermo-responsive polymers can be used to create a DNA sieving matrix with a thermally tunable mesh size, or "dynamic porosity". Various blends of two well-studied sieving polymers for CE, including hydroxypropylcellulose (HPC), a thermo-responsive polymer, and hydroxyethylcellulose (HEC), a nonthermo-responsive polymer, were used to separate a double-stranded DNA restriction digest (Phi X174-HaeIII). HPC exhibits a volume-phase transition in aqueous solution which results in a collapse in polymer coil volume at approximately 39 degrees C. Utilizing a blend of HPC and HEC in a ratio of 1:5 by weight, we investigated the effects of changing mesh size on DNA separation, as controlled by temperature. High-resolution DNA separations were obtained with the blended matrix at temperatures ranging from 25 degrees C to 38 degrees C. We evaluated changes in the selectivity of DNA separation with increasing temperature for certain pairs of small and large fragments. A pure HEC (nonthermo-responsive) matrix was used over the same temperature range as a negative control. In the blended matrix, we observe a maximum in selectivity at approximately 31 degrees C for small DNA, while a significant increase in the selectivity of large-DNA separation occurs at approximately 36 degrees C as the polymer mesh "opens". We also demonstrate, through a temperature ramping experiment, that this matrix can be utilized to obtain high-resolution separation of both small and large DNA fragments simultaneously in a single CE run. Blended polymer matrices with "dynamic porosity" have the potential to provide enhanced genomic analysis by capillary array or microchip electrophoresis in microfluidic devices with advanced temperature control.

We present the first optimization of linear polyacrylamide (LPA)-based DNA separation matrixes for an automated tandem microchannel single-strand conformation polymorphism (SSCP)/heteroduplex analysis (HA) method, implemented in capillary arrays dynamically coated with poly(N-hydroxyethylacrylamide) (polyDuramide). An optimized protocol for sample preparation allowed both SSCP and HA species to be produced in one step in a single tube and distinguished in a single electrophoretic analysis. A simple, two-color fluorescent sample labeling and detection strategy enabled unambiguous identification of all DNA species in the electropherogram, both single- and double-stranded. Using these protocols and a panel of 11 p53 mutant DNA samples in comparison with wild-type, we employed high-throughput capillary array electrophoresis (CAE) to carry out a systematic and simultaneous optimization of LPA weight-average molar mass (Mw) and concentration for SSCP/HA peak separation. The combination of the optimized LPA matrix (6% LPA, Mw 600 kDa) and a hydrophilic, adsorbed polyDuramide wall coating was found to be essential for resolution of CAE-SSCP/HA peaks and yielded sensitive mutation detection in all 11 p53 samples initially studied. A larger set of 32 mutant DNA specimens was then analyzed using these optimized tandem CAE-SSCP/HA protocols and materials and yielded 100% sensitivity of mutation detection, whereas each individual method yielded lower sensitivity on its own (93% for SSCP and 75% for HA). This simple, highly sensitive tandem SSCP/HA mutation detection method should be easily translatable to electrophoretic analyses on microfluidic devices, due to the ease of the capillary coating protocol and the low viscosity of the matrix.

Solid-phase synthesis of oligomers, both natural and nonnatural, has proved to be invaluable for the development of many areas of biotechnology. A critical step in the solid-phase synthesis of any oligomer is determining the number and concentration of different constituents present in the product mixture resulting from the synthesis, both before and after purification. Most typically, this analysis is performed by reversed-phase high performance liquid chromatography (RP-HPLC), with the separated components detected by UV absorbance. Recently, we described a novel technique, free-solution conjugate electrophoresis (FSCE), for the high-resolution separation and sensitive laser-induced fluorescence (LIF) detection of uncharged, synthetic polymers, PEG in particular. In this report, we apply this bioconjugate capillary electrophoresis technique to analyze products of the solid-phase synthesis of oligomeric polyamides, namely poly(N-substituted glycines), or polypeptoids. When compared to more traditional RP-HPLC analysis, FSCE analysis of oligomeric peptoids results in separation resolutions that are approximately five times higher and separation efficiencies that are increased by 150%. Moreover, when FSCE with LIF detection is applied to the analysis of oligomeric polyamides after HPLC purification, impurities that are not detectable in RP-HPLC analysis are readily separated and detected. With the advent of capillary array electrophoresis (CAE), which allows for automated, parallel analysis of many different samples, we believe that FSCE will be especially applicable to the analysis of combinatorial synthesis products, by allowing researchers to evaluate many different samples in a single, highly parallel, fully automated analysis. This is in contrast to RP-HPLC analysis, in which samples must be analyzed in series.

A novel, replaceable polymer matrix based on a new N-substituted acrylamide monomer Duramide™ has been synthesized for application in DNA separations by microchannel electrophoresis. The monomer was found to be more hydrophilic than both acrylamide and N, N-dimethylacrylamide (DMA). Polymers were synthesized by free radical polymerization in aqueous solution and characterized by tandem gel permeation chromatography — multi-angle laser light scattering. PolyDuramide™ exhibits good capillary-coating ability via adsorption from aqueous solution, efficiently suppressing electroosmotic flow (EOF) in a manner comparable to that of poly-N,N-dimethylacrylamide (PDMA). Under DNA sequencing conditions, adsorptive polyDuramide™ coatings proved to be stable and to maintain negligible EOF for over 600 hours of electrophoresis. Resolution of DNA sequencing fragments, particularly fragments > 500 bases, in the novel matrix generally improves with increasing polymer concentration and decreasing electric field strength. Using polyDuramide both as a separation matrix and as a dynamic coating in bare fused silica capillaries, the matrix can resolve over 620 bases of contiguous DNA sequence within about 3 hours. Within a glass chip, the same results could likely be achieved in ∼30 minutes. These results demonstrate the potential of the novel matrix for use in DNA separation, as well as proteins, by microchannel electrophoresis.

DNA molecules cannot be separated by free-solution electrophoresis [1], because in free solution the ratio of net molecular charge to friction coefficient (the electrophoretic mobility) is nearly equal for all DNA molecules regardless of their chain length [2, 3]. However, it was discovered in 1967 [4] that if electrophoresis is performed within a properly-formulated slab gel matrix (e.g., agarose or crosslinked Polyacrylamide), it is possible to separate differently-sized DNA molecules into distinct zones, where electrophoretic mobility is a decreasing function of DNA chain length. In addition to providing size-based separation of DNA, the crosslinked Polyacrylamide or agarose network of a slab gel serves as a physical support during electrophoresis, substantially reducing diffusion and convection of migrating DNA molecules. This allows the separated zones of differently-sized DNA molecules to remain relatively sharp, if gel formulation and electrophoresis conditions are chosen properly.

We demonstrate the feasibility of temperature-sensitive polymers as novel matrices for capillary and slab electrophoresis of DNA. These matrices combine the case-of-use of agarose with resolution properties of polyacrylamide. Two classes of matrices are used: (i) aqueous suspensions of gel microspheres and (ii) solutions containing uncross-linked temperature-sensitive polymers. When heated, the viscosity of these solutions drops dramatically because of the phase transition behavior of these polymers, and therefore these formulations are easy to pour or load. Results are presented for separation of double-stranded DNA fragments (< 2000 bp) in capillary, tube, and slab electrophoresis. Preliminary results are also presented for separation of single-stranded sequencing fragments by capillary electrophoresis. In the tube format, good resolution was obtained for phi X174/HaeIII fragments. In the slab format, excellent resolution of double-stranded DNA was obtained, including simultaneous separation of a 10 bp ladder up to 150 base pairs. In the capillary format, pBR322/MspI fragments were completely resolved, and single-base resolution of sequencing fragments was obtained up to 150 bases. We believe that temperature-sensitive polymers represent a new and promising class of electrophoretic media.

Low-viscosity, aqueous solutions of hydrophilic linear polymers have been shown to be useful for the separation of DNA restriction fragments by capillary electrophoresis (CE). However, the choice of polymer type, size, and concentration remains largely empirical, because the mechanism of high-field electrophoretic DNA separations in polymer solutions is not well understood. To assist in elucidating the mechanism of DNA separation, we experimentally investigated the effects of polymer properties such as stiffness (persistence length), average molecular mass, polydispersity, and hydrophilicity on the separation of DNA ranging from 72 bp to 23 kbp. This was accomplished by comparing the results of DNA separations obtained by counter-migration CE in dilute and semidilute solutions of linear polyacrylamide (PAA), hydroxyethyl-cellulose (HEC), and hydroxypropylcellulose (HPC) polymers of several different average molecular masses.

We have used dilute and semi-dilute uncross-linked hydroxyethyl cellulose (HEC) solutions as separation matrices for capillary electrophoresis of DNA restriction fragments. In these experiments, we investigated the effects of HEC molecular weight and concentration on resolution, attempting to relate these parameters to the polymer entanglement threshold concentration. The entanglement thresholds of seven molecular weight fractions of hydroxyethyl cellulose were determined from viscosity-concentration data; the entanglement threshold was found to scale as N-1.2, where N = number of HEC monomers. This finding is not in agreement with classical scaling arguments. We present a relationship to predict the observed entanglement threshold of HEC in solution as a function of number average molecular weight. It was found that excellent separation of phi X174/HaeIII DNA restriction fragments (72-1353 base pairs) by capillary electrophoresis in HEC solutions can be achieved significantly below the entanglement threshold, depending on DNA size and HEC molecular weight. The mechanism of separation in these uncross-linked polymer solutions must therefore be reexamined. Our experiments show that the entanglement threshold is a useful parameter in predicting a range of HEC concentrations which will separate certain DNA fragments for a given HEC molecular weight. However, the presence of a fully entangled network is not a prerequisite for separation.

The conjugation of an uncharged polymer to DNA fragments makes it possible to separate DNA by free-solution electrophoresis. This end-labeled free-solution electrophoresis method has been shown to successfully separate ssDNA with single monomer resolution up to about 110 bases. It is the aim of this paper to investigate in more detail the coupled hydrodynamic and electrophoretic deformation of the ssDNA-label conjugate at fields below 400 V/cm. Our model is an extension of the theoretical approach originally developed by Stigter and Bustamante [Biophys. J. 75, 1197 (1998)] to investigate the problems of a tethered chain stretching in a hydrodynamic flow and of the electrophoretic stretch of a tethered polyelectrolyte. These two separate models are now used together since the charged DNA is "tethered" to the uncharged polymer (and vice versa), and the resulting self-consistent model is used to predict the deformation and the electrophoretic velocity for the hybrid molecule. Our theoretical and experimental results are in good qualitative agreement.

A replaceable polymer matrix, based on the novel monomer N-hydroxyethylacrylamide (HEA), has been synthesized for application in DNA separation by microchannel electrophoresis. The monomer was found by micellar electrokinetic chromatography analysis of monomer partitioning between water and 1-octanol to be more hydrophilic than acrylamide and N,N-dimethylacrylamide. Polymers were synthesized by free radical polymerization in aqueous solution. The weight-average molar mass of purified polymer was characterized by tandem gel permeation chromatography-multiangle laser light scattering. The steady-shear rheological behavior of the novel DNA sequencing matrix was also characterized, and it was found that the viscosity of the novel matrix decreases by more than 2 orders of magnitude as the shear rate is increased from 0.1 to 1000 s(-1). Moreover, in the shear-thinning region, the rate of change of matrix viscosity with shear rate increases with increasing polymer concentration. Poly-N-hydroxyethylacrylamide (PHEA) exhibits good capillary-coating ability, via adsorption from aqueous solution, efficiently suppressing electroosmotic flow (EOF) in a manner comparable to that of poly-N,N-dimethylacrylamide. Under DNA sequencing conditions, adsorptive PHEA coatings proved to be stable and to maintain negligible EOF for over 600 h of electrophoresis. Resolution of DNA sequencing fragments, particularly fragments > 500 bases, in PHEA matrices generally improves with increasing polymer concentration and decreasing electric field strength. When PHEA is used both as a separation matrix and as a dynamic coating in bare silica capillaries, the matrix can resolve over 620 bases of contiguous DNA sequence within 3 h. These results demonstrate the good potential of PHEA matrices for high-throughput DNA analysis by microchannel electrophoresis.