Search

Riociguat is novel antihypertensive drug for treatment of pulmonary hypertension. As such, it is still being tested in many clinical and pharmacokinetic trials. Existing methods that determine serum riociguat and desmethylriociguat (DMR) are based solely on liquid chromatography with mass spectrometry. Therefore, we present a novel capillary electrophoresis with mass spectrometry method (CE-MS) for their determination in human serum as alternative method for ongoing trials. Complete resolution of both analytes was achieved by means of pH optimization of ammonium formate background electrolytes that are fully compatible with ESI/MS detection. Simple liquid-liquid extraction was used as sample pretreatment. The calibration dependence of the method was linear (in the range of 10-1000 ng/mL), with adequate accuracy (90.1-114.9%) and precision (13.4%). LOD and LOQ were arbitrarily set at 10 ng/mL for both analytes. Clinical applicability was validated using serum samples from patients treated with riociguat in pharmacokinetic study and the results corresponded with reference HPLC-MS/MS values. Capillary electrophoresis proved to be sensitive and selective tool for the analysis of riociguat and DMR., (© 2020 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

For the first time, capillary electrophoresis has been successfully employed for the fast and highly efficient separations of a novel type of stereoisomers - planar rotamers (planamers) of four newly synthesized 5-nitrosopyrimidine derivatives. These derivatives can form two rotamers differing in the orientation of nitroso group due to strong intramolecular hydrogen bonds. Partial separation of rotamers of two 5-nitrosopyrimidines was achieved in alkaline 50 mM sodium tetraborate, pH 9.3, and in acidic 18.5/42 mM Tris/phosphate, pH 2.3, background electrolytes (BGEs) free of stereoselectors. To improve the separation of these rotamers and to attain the baseline or better separation of rotamers of other two 5-nitrosopyrimidines, various BGEs and different cyclodextrins-based stereoselectors were tested. The most effective, i.e. the fastest and baseline or better separations of rotamers of all analyzed 5-nitrosopyrimidines were achieved within a short time, 3.7-9.3 min, in the above alkaline or acidic BGEs using β-cyclodextrin (β-CD) or carboxymethyl-β-CD as stereoselectors. Moreover, since the experiments with β-CD resulted in good separations of rotamers of all the investigated 5-nitrosopyrimidines, the apparent binding constants of their complexes with this selector were determined from the dependence of their effective mobilities on the β-CD concentration in the BGEs. The examined complexes were found to be relatively weak, with the apparent binding constants in the range 11.3-153.0 L/mol., (Copyright © 2018 Elsevier B.V. All rights reserved.)

The HPLC semipreparative enantioseparation of 9-hydroxyrisperidone (9-OHRisp) was studied by optimizing various experimental conditions: the nature of the chiral stationary phase (CSP), mobile phase composition, temperature and analyte loading. This semipreparative enantioseparation was successfully completed using the polysaccharide Chiralcel OJ chiral stationary phase and a n-hexane/ethanol/methanol (50/35/15, v/v/v) ternary mobile phase. To assess the enantiomeric purity of both isolated isomers, three analytical methods using UV detection were developed and validated: one CE method using dual cyclodextrin mode and two HPLC methods using either the Chiralcel OJ CSP in normal-phase mode or the alpha-acid glycoprotein (alpha-AGP) CSP in reversed-phase mode. The three methods make it possible to obtain excellent enantioseparations (R(s) >3) with analysis times lower than 15 min, and the calculated limits of detection allow for the determination of minor enantiomeric impurities (0.1%). Enantiomeric purity obtained for dextrorotatory and levorotatory enantiomers was superior to 99.9% and equal to 98.9%, respectively, which proved the success of the semipreparative enantioseparation. A brief comparison of the performances of the analytical methods completes this work.

This paper describes the enhanced separation of adenine (A), hypoxanthine (HX), 8-azaadenine (8-AA), thymine (T), cytosine (C), uracil (U) and guanine (G) by CZE dispersing carboxylic multiwalled carbon nanotubes (c-MWNTs) into the running buffer. The effect of important factors such as c-MWNT nanoparticle concentration, the acidity and concentration of running buffer, and separation voltage were investigated to acquire the optimum conditions. The seven purine and pyrimidine bases could be well separated within 16 min in a 35 cm effective length fused-silica capillary at a separation voltage of +8.0 kV in a 23 mM tetraborate buffer (pH 9.2) containing 8.0 x 10(-5) g/mL c-MWNTs. Under the optimal conditions, the linear ranges were of 2-250 microg/mL for A (R2 = 0.995), 3-200 microg/mL for U (R2 = 0.990) and G (R2 = 0.992), 3-250 microg/mL for T (R2 = 0.998), 2-200 microg/mL for C (R2 = 0.985) and 4-200 microg/mL for HX (R2 = 0.988) and 8-AA (R2 = 0.990). The detection limits were 0.9 microg/mL for A (S/N = 3), 2.4 microg/mL for U, 2.0 microg/mL for T, 1.5 microg/mL for C, 2.5 microg/mL for G and 3.0 microg/mL for HX and 8-AA. The proposed method was successfully applied for determining five purine and pyrimidine bases in yeast RNA.

In this work, a combined methodology using off-line solid-phase extraction (SPE), on-line field-enhanced sample injection (FESI) and coelectroosmotic capillary electrophoresis with UV detection (CE-UV) is developed for the trace analysis of five triazolopyrimidine sulfonanilide pesticides (i.e., flumetsulam, florasulam, cloransulam-methyl, diclosulam and metosulam). An adequate background electrolyte (BGE) was obtained for the separation of these pesticides using hexadimethrine bromide (HDB) as electroosmotic flow (EOF) modifier. This BGE consisted of 0.00042% HDB, 11 mM formic acid, 16 mM ammonium carbonate and 2.5 mM alpha-CD solution at pH 7.6. The use of this running buffer together with the FESI preconcentration method provided limits of detection (LODs) in the low microg/L range (i.e., between 13.0 and 31.5 microg/L). The optimized FESI-CE-UV method was combined with off-line SPE using C(18) cartridges and applied to the determination of the selected group of pesticides in soil samples. Recovery percentages ranged between 50 and 84% in these samples with LODs between 18 and 34 microg/kg. This work shows the great possibilities of the combined use of SPE-FESI-CE-UV to improve CE sensitivity allowing the achievement of LODs similar to other analytical techniques as GC or HPLC.

A two-dimensional (2-D) separation system of coupling chromatography to electrophoresis was developed for profiling Escherichia coli metabolites. Capillary liquid chromatography (LC) with a monolithic silica-octadecyl silica column (500 x 0.2 mm ID) was used as the first dimension, from which the effluent fractions were further analyzed by capillary electrophoresis (CE) acting as the second dimension. Field-enhanced stacking was selectively employed as a concentration strategy to interface the two dimensions, which proved to be beneficial for the detection of metabolites. An artificial sample containing 118 standards, some of which lack chromophores or have weak UV absorbance, was used to optimize the 2-D separation system. Under the optimum conditions, 63 components in the artificial sample having absorbance at 254 nm could be well resolved and detected. The utility of the system was demonstrated by comprehensive analysis of E. coli metabolites. Comparing with the previous 2-D separation system we published in Anal. Chem. 2004, 76, 1419-1428, using a longer monolithic column in the first dimension improved the separation efficiency and offered the possibility of increasing the injection volume without compromising the separation efficiency. In the second dimension, field-enhanced stacking was used to improve the concentration sensitivity of the metabolites, and more metabolites in E. coli cell extract were detected and identified using the developed 2-D separation system. In addition, preliminary investigation for future CE-mass spectrometry coupling was also made in the study by using volatile buffers in the capillary LC and CE techniques.

The combined use of solid-phase microextraction (SPME) and different on-line preconcentration strategies for ultrasensitive capillary electrophoresis-ultraviolet (CE-UV) analysis of five pesticides in a single run is investigated. Normal stacking mode (NSM), field-enhanced sample injection (FESI), and stacking with matrix removal (SWMR) are explored to increase the sensitivity of the CE-UV analysis of a selected group of pesticides (cyprodinil, cyromazine, pyrifenox, pirimicarb, and pyrimethanil). It could be observed that reverse polarity-stacking with matrix removal (RP-SWMR) provided the best results in terms of sensitivity (enhancement was up to 272-fold compared with normal injection). The separation buffer consisted of 0.4 mM cetyltrimethylammonium chloride (CTAC), 0.4 M acetic acid at pH 4 containing 5% v / v 2-propanol. This approach was then combined with SPME to determine the pesticides in water, apple, and orange juice. The combination of both preconcentration procedures allowed the determination of these pesticides at concentrations down to 2.5 microg / L in water and 3.1 microg / L in juices (i.e., levels well below the maximum residue limits allowed for these compounds). To our knowledge, this is the first report showing the great possibilities of the combined use of SPME, on-line sample preconcentration, and CE for pesticide analysis.

A simple and robust solid-phase extraction (SPE) procedure for the cleanup and sample preconcentration of antifungals (ketoconazole, clotrimazole, itraconazole, fluconazole, and voriconazole) and their metabolites after incubation with human liver microsomes, as well as a simplified capillary zone electrophoresis (CZE) method for their rapid analysis, have been developed to determine the stability of these compounds in in vitro samples. Three different sample pretreatment procedures using SPE with reversed-phase sorbents (100 mg C8, 100 mg C18, and 30 mg Oasis-HLB) were studied. The highest and most reproducible recoveries were obtained using a 30 mg Oasis-HLB sorbent and methanol containing 2% acetic acid as eluent. Enrichment by a factor of about four times was achieved by reconstituting the final SPE eluates to a small volume. For the CZE separation, good separations without interfering peaks due to the in vitro matrix were obtained with a simple running electrolyte using a fused-silica capillary. The best separation for all components originated by each tested drug after incubation with human liver microsomes (unmetabolized parent drug and its metabolites) was obtained using a 0.05 M phosphate running buffer (pH 2.2) without additives. The effect of the injection volume was also investigated in order to obtain the best sensitivity. Performance levels in terms of precision, linearity, limits of detection, and robustness were determined.

The sodium salt of the single-isomer, heptakis-(2,3-dimethyl-6-sulfato)-beta-cyclodextrin (HDMS-betaCD) was used as resolving agent in the capillary electrophoretic (CE) separation of weak base enantiomers in pure methanol background electrolytes (BEs). According to the requirements of the charged resolving agent migration model of CE enantiomer separations (CHARM model), a high buffer-capacity, low pH methanolic BE was created from 25 mM phosphoric acid and 12.5 mM NaOH. In this BE, the solubility of HDMS-betaCD was as high as 50 mM, permitting the realization of very high separation selectivities and short separation times for the fully protonated weak base enantiomers.