Search

One of the major challenges for process control is wafer to wafer and lot to lot variation, for the 14nm technology node and beyond. Most of advanced process control (APC) is based on product groups, and different product groups exhibit different amounts of parameter tuning. Because lithography pattern density varies between product groups, it is difficult or impossible to share APC threads between different product groups. This paper will introduce a new method to optimize current APC into a dynamic control. With dynamic control, product groups having different pattern density will have a similar amount of parameter tuning and all product groups could share APC feedback. This paper also shows the simulation results and predicts CD sigma with dynamic control.

This paper presents the details on the use of dual illumination conditions through double exposure to support the imaging of contact holes through pitch for 65nm node applications. Data generated from a 0.85 NA ArF ASML TWINSCAN(TM) system will be presented. The authors will also present simulation and process data to understand the limitations and improvements in imaging capability.

Critical dimension (CD) metrology is an important process step within the wafer fab. Knowledge of the CD values at resist level provides a reliable mechanism for the prediction of device performance. Ultimately tolerances of device electrical performance drive the wafer linewidth specifications of the lithography group. Staying within this budget is influenced mainly by the scanner settings, resist process and photomask quality. At the 65nm node the ITRS roadmap calls for sub-3nm photomask CD uniformity to support a sub-3nm wafer level CD uniformity. Meeting these targets has proven to be a challenge. What can be inferred from these specifications is that photomask level CD performance is the direct contributor to wafer level CD performance. With respect to phase shift masks, criteria such as phase and transmission control are also tightened with each technology node. A comprehensive study is presented supporting the use of photomask aerial image emulation CD metrology to predict wafer level Across Chip Linewidth Variation (ACLV). Using the aerial image can provide more accurate wafer level prediction because it inherently includes all contributors to image formation such as the physical CD, phase, transmission, sidewall angle, and other material properties. Aerial images from different photomask types were captured to provide across chip CD values. Aerial image measurements were completed using an AIMSTMfab193i with its through-pellicle data acquisition capability including the Global CDU MapTM software option for AIMSTM tools. The through-pellicle data acquisition capability is an essential prerequisite for capturing final CD data (after final clean and pellicle mounting) before the photomask ships or for re-qualification at the wafer fab. Data was also collected on these photomasks using a conventional CD-SEM metrology system with the pellicles removed. A comparison was then made to wafer prints demonstrating the benefit of using aerial image CD metrology.

Today novel RET solutions are gaining more and more attention from the lithography community that is facing new challenges in attempting to meet the new requirement of the SIA roadmap. Immersion, high NA, polarization, and mask topography, are becoming common place terminology as lithographers continue to explore these areas. Here with, we compare a traditional 6% MoSi based EAPSM reticle and a high transmission solution made of a SiON/Cr film stack. Insights into the manufacturability of high transmission material are provided. Test patterns have been analyzed to determine the overall impact of imaging performance when used with immersion scanners and polarized light. Some wafer results provide reliability of simulations, which are used to make further investigation on polarization and immersion effects.

The requirements for critical dimension control on gate layer for high performance products are increasingly demanding. Phase shift techniques provide aerial image enhancement, which can translate into improved process window performance and greater critical dimension (CD) control if properly applied. Unfortunately, the application of hard shifter technology to production requires significant effort in layout and optical proximity correction (OPC) application. Chromeless Phase Lithography (CPL) has several advantages over complementary phase mask (c:PSM) such as use of a single mask, and lack of phase placement 'coloring' conflicts and phase imbalance issues. CPL does have implementation issues that must be resolved before it can be used in full-scale production. CPL mask designs can be approached by separating features into three zones based on several parameters, including size relative to the lithographic resolution of the stepper lens, wavelength, and illumination conditions defined. Features are placed into buckets for different treatment zones. Zone 1 features are constructed with 100% transmission phase shifted structures and Zone 3 features are chrome (binary) structures. Features that fall into Zone 2, which are too wide to be defined using the 100% transmission of pure CPL (i.e. have negative mask error factor, MEEF) are the most troublesome and can be approached in several ways. The authors have investigated the application of zebra structures of various sizes to product type layouts. Previous work to investigate CPL using test structures set the groundwork for the more difficult task of applying CPL rules to actual random logic design layouts, which include many zone transitions. Mask making limitations have been identified that play a role in the zebra sizing that can be applied to Zone 2 features. The elimination of Zone 2 regions was also investigated in an effort to simplify the application of CPL and improve manufacturability of reticle through data enhancements.

The lithography prognosticator of the early 1980"s declared the end of optics for sub-0.5μm imaging. However, significant improvements in optics, photoresist and mask technology continued through the mercury lamp lines (436, 405 & 365nm) and into laser bands of 248nm and to 193nm. As each wavelength matured, innovative optical solutions and further improvements in photoresist technology have demonstrated that extending imaging resolution is possible thus further reducing k1. Several authors have recently discussed manufacturing imaging solutions for sub-0.3k1 and the integration challenges. The requirements stated in the ITRS roadmap for current and future technology nodes are very aggressive. Therefore, it is likely that high NA in combination with enhancement techniques will continue further for aggressive imaging solutions. Lithography and more importantly "imaging solutions" are driven by economics. The technology might be extremely innovative and "fun", however, if it's too expensive it may never see the light of scanner. The authors have investigated and compared the capability of high transmission mask technology and image process integration for the 45nm node. However, the results will be graded in terms of design, mask manufacturability, imaging performance and overall integration within a given process flow.© (2005) COPYRIGHT SPIE--The International Society for Optical Engineering. Downloading of the abstract is permitted for personal use only.

Today the industry is filled with intensity-balanced c:PSM and much more focus is being placed on innovative approaches such as CPL (and in conjunction with IML for Contacts) and tunable transmission embedded attenuating phase shift mask (TT-EAPSM). Each approach has its own merits and demerits depending on the manufacturing strategy and lithography performance required. Currently the only commercially available photomask blanks are different chrome thickness binary and 6% attenuating blanks using molybdenum-silicide, making the accessibility to alternate transmissions much more challenging. This paper investigates the mask manufacturability of a tunable transmission embedded attenuating phase shift mask. New film materials that are used in the mask blank manufacture are modeled, deposited and characterized to determine its ability to meet performance requirements. Sputtering models, by rate and gas component, determines film stacks with tunable transmissions and thicknesses. Chemical durability, etch selectivity and thickness are a few parameters of the films that have been characterized to enhance the manufacturability and process reliability of the masks. Lithography simulation models using measured optical properties were developed and test masks that include actual device designs were fabricated. Analysis of CD variation, pattern fidelity and process margin was performed using 3D mask simulation to understand the impact on 65nm design rules. Feasibility and performance of tunable transmission photomasks for use in design and lithography are verified. Moreover, the mask manufacturability and lithography performance is compared to other enhancement techniques and their merits presented.

Various types of line ends have been evaluated for either straight CPL mask or hybrid type builds. The authors will focus on image line end shortening and the impact of through dose and focus performance for very high NA ArF imaging. Simulations on test structures have been calculated along with in photoresist simulations to predict the impact on process window capability. Test structures have been designed and fabricated into a functional test for evaluation. Process evaluations have been completed and exposure-defocus window calculated.

Each generation of semiconductor device technology drive new and interesting resolution enhancement technology (RET's). The race to smaller and smaller geometry's has forced device manufacturers to k1's approaching 0.40. The authors have been investigating the use of Chromeless phase-shifting masks (CLM) exposed with ArF, high numerical aperture (NA), and off-axis illumination (OAI) has been shown to produce production worthy sub-100nm resist patterns with acceptable overlapped process window across feature pitch. There have been a number of authors who have investigated CLM in the past but the technology has never received mainstream attention due to constraints such as wet quartz etch during mask fabrication, limited approach to optical proximity correction (OPC), and exposure tool limitations such as on-axis illumination and too low of NA. With novel binary halftone OPC and a capable modern mask making process, it has become possible to achieve global and local pattern optimization of the phase shifter for a given layout especially for patterning features with dimension at sub-half-exposure wavelength. The authors have built a number of test structures that require superior 2D control for SRAM gate structures. In this paper the authors will focus on image process integration for the 65nm node. Emphasis on pattern layout, mask fabrication and image processing will be discussed. Furthermore, the authors will discuss defect printing, inspection and repair, mask error enhancement factor (MEEF) of 2D structures coupled with phase error, layout, and mask fabrication specifications.

As IC fabrication processes are maturing for the 130nm node, IC devices manufacturers are focusing on 90nm device manufacturing at ever-lower k 1 values. Driven by cost savings, many integrated device manufacturers (IDMs) and foundries are working toward patterning critical mask layers of 90nm designs using high numerical aperture KrF exposure tools. The goal of this study is to find out whether KrF can be successfully used instead of ArF for fabricating 90nm devices. This exercise will help to gain learning for the upcoming 65nm node, where the early manufacturing phase will also be carried out at a similar k 1 of near 0.3 using ArF. For high volume wafer production, the cost and throughput are in favor of using a single exposure PSM technique vs. the two masks and double exposure technique required for alternating phase shift masks (altPSM). The high mask cost of altPSM also discourages its use for low volume manufacturing. The two leading candidates candidates for 90nm node using KrF are: 6% attenuated PSM and CPL Technology. In this work, we present a methodology on how to use transmission tuning to achieve the best process latitude for patterning poly gate layer. First, we analyze the diffraction patterns from 6% attPSM and CPL mask features and identify the optimum transmission for various pitches. Next we describe how CPL mask can be used as a variable transmission attenuated mask to produce the best through pitch imaging performance and show a practical implementation method for applying to real device designs. Then we demonstrate how to integrate the optimized transmission tuning into the data process and OPC flow for generating CPL mask. Finally, we provide an example experimental result on a real device pattern.

Each generation of semiconductor device technology drive new and interesting resolution enhancement technology (RET’s). The race to smaller and smaller geometry’s has forced device manufacturers to k1’s approaching 0.40. The authors have been investigating the use of Chromeless phase-shifting masks (CLM) exposed with ArF, high numerical aperture (NA), and off-axis illumination (OAI) has been shown to produce production worthy sub-100nm resist patterns with acceptable overlapped process window across feature pitch. There have been a number of authors who have investigated CLM in the past but the technology has never received mainstream attention due to constraints such as wet quartz etch during mask fabrication, limited approach to optical proximity correction (OPC), and exposure tool limitations such as on-axis illumination and too low of NA. With novel binary halftone OPC and a capable modern mask making process, it has become possible to achieve global and local pattern optimization of the phase shifter for a given layout especially for patterning features with dimension at sub-half-exposure wavelength. The authors have built a number of test structures that require superior 2D control for SRAM gate structures. In this paper the authors will focus on image process integration for the 65nm node. Emphasis on pattern layout, mask fabrication and image processing will be discussed. Furthermore, the authors will discuss defect printing, inspection and repair, mask error enhancement factor (MEEF) of 2D structures coupled with phase error, layout, and mask fabrication specifications.

The 65nm device generation will require steady improvements in lithography scanners, resists, reticles and OPC technology. 193nm high NA scanners and illumination can provide the desired dense feature resolution, but achieving the stringent overall 65nm logic product requirements necessitates a more coherent strategy of reticle, process, OPC, and design methods than was required for previous generations. This required integrated patterning solution strategy will have a fundamental impact on the relationship between design and process functions at the 65nm device node.

Each generation of semiconductor device technology drive new and interesting resolution enhancement technology (RET’s). The race to smaller and smaller geometry’s has forced device manufacturers to k1’s approaching 0.40. The authors have been investigating the use of Chromeless phase-shifting masks (CLM) exposed with ArF, high numerical aperture (NA), and off-axis illumination (OAI) has been shown to produce production worthy sub-100nm resist patterns with acceptable overlapped process window across feature pitch. There have been a number of authors who have investigated CLM in the past but the technology has never received mainstream attention due to constraints such as wet quartz etch during mask fabrication, limited approach to optical proximity correction (OPC), and exposure tool limitations such as on-axis illumination and too low of NA. With novel binary halftone OPC and a capable modern mask making process, it has become possible to achieve global and local pattern optimization of the phase shifter for a given layout especially for patterning features with dimension at sub-half-exposure wavelength. The authors have built a number of test structures that require superior 2D control for SRAM gate structures. In this paper the authors will focus on image process integration for the 65nm node. Emphasis on pattern layout, mask fabrication and image processing will be discussed. Furthermore, the authors will discuss defect printing, inspection and repair, mask error enhancement factor (MEEF) of 2D structures coupled with phase error, layout, and mask fabrication specifications.

Semiconductor manufacturers are increasingly focusing on contact and via layers as the most difficult lithography pattern. Focus and exposure latitude, MEF, as well as iso-dense bias are challenges for contact patterning. This situation is only expected to worsen for the 65nm device generation where the 2001 SIA roadmap update lists the contact size as 90-100nm in 2004-2005. Thus, new contact pattern techniques with novel manufacturability are required. One possible avenue to meet these stringent process control requirements is the use of tri-tone high transmission attenuated phase shifting masks (tri-tone AttPSM) for the 65nm generation. Multilayered SiN/TiN (9%-18%) EAPSM materials to manufacture advanced reticles were used in this investigation. Extensive study during the photomask processing (Front End and Back End) to access any issues related to the making of High %T tri-tone product types was performed. Finally, the 2 prototype reticles were evaluated on a 193nm scanner (0.75NA) with various illumination settings to generate imaging to support the 65nm node technology generation.

Due to the challenging design rule and CD control requirements of the 100 nm device generation, a large number of complex patterning techniques are likely to be used for random logic devices. The complexity of these techniques places considerable strain upon model-based OPC software to identify and compensate for a wide range of printing non- idealities. Additionally, the rapidly increasing cost of advanced reticles has increased the urgency of obtaining reticles devoid of process limiting design or OPC errors. We have evaluated the capability of leading edge model-based OPC software to meet the challenging lithography needs of the 100 nm device generation. Specifically, we have implemented and verified model usefulness to correct for pattern deformation in complex binary gate, contact and via processes utilizing highly optimized illumination. Additionally, we present results showing the abilities of model-based methods to accurately find design related printing problems in complementary phase shift gate designs before they are committed to an expensive reticle.

Repair and printability of 193nm alternating aperture phase shift masks have been studied in detail in an effort to understand the overall production capability of these masks for wafer production at the 100nm node and below.

Smaller device dimensions and tighter process control windows have created a need for CD metrology tools having higher levels of precision and accuracy. Furthermore, the need to detect and measure changes in feature profiles is becoming critical to in-line process control and stepper evaluation for sub-0.18μm technology. Spectroscopic CD (SCD ) is an optical metrology technique that can address these needs. This work describes the use of a spectroscopic CD metrology tool to measure and characterize a sub-0.18μm gate level focus and exposure matrix. The spectroscopic CD tool is used to characterize the focus and exposure windows for the process. The results include comparison to the established in-line CD-SEM, as well as a cross-section SEM. Repeatability and long-term stability data from a gate level nominal process are also presented.

The continuing demand for higher frequency microprocessors and larger memory arrays has led to decreasing device dimensions and smaller process control windows. Decreasing process control windows have created a need for higher precision metrology to maintain an acceptable precision to tolerance ratio with a reasonable sampling rate. In order to determine and reduce across chip, across wafer, and across lot linewidth variations, higher sampling is required which, in turn, demands faster move acquire measure (MAM) times to maintain throughput. Finally, the need to detect and quantify sidewall angle changes in addition to CD measurements is becoming critical. Spectroscopic Scatterometry is a metrology technique which offers the potential to meet these requirements. This work explores some of the fundamental technology concerns for implementing scatterometry in a manufacturing environment. These concerns include mark requirements and characterization necessary for library generation. Comparison of scatterometry data to in-line CD SEM, x-section SEM, and AFM results will be presented.© (2000) COPYRIGHT SPIE--The International Society for Optical Engineering. Downloading of the abstract is permitted for personal use only.