Search

A series of Co-doped and Cr-doped Ba1-xCoxFe12-yCryO19 nanoparticles (NPs) were synthesized via the microemulsion route. The effects of Co and Cr substitution on the structural, dielectric, optical, and photocatalytic properties of the NPs were investigated. The Ba1-xCoxFe12-yCryO19 NPs were characterized using Fourier-transform infrared spectroscopy, X-ray diffraction analysis, scanning electron microscopy, Raman scattering, and dielectric measurements. The Ba1-xCoxFe12-yCryO19 NPs were obtained in a single phase with an average crystallite size of 18 nm. The dielectric constant of the NPs decreased, while the dielectric loss and tangent loss increased with increasing dopant (Co and Cr) contents. The photocatalytic activities (PCAs) of the Ba1-xCoxFe12-yCryO19 and BaFe12O19 NPs were appraised by carrying out the degradation of CV (crystal violet) dye under solar light irradiation. The doping improved the PCA of BaFe12O19, and up to 64.23% of the CV dye could be degraded within 60 min under visible light irradiation. The Ba1-xCoxFe12-yCryO19 NPs showed great potential for application as an economic photocatalyst as they required solar light irradiation for the degradation of CV.

A quaternary glass system was fabricated via the melting quenching method. The mentioned glass system consists of five samples described by the chemical composition 50B2O3 + 30BaF2 + (20-x)Li2O + xAg2O, 0.0

The purpose of this investigation is to study the physical, structural and optical characteristics of a newly fabricated SrO2 doped lithium bismuth borate glass system. The current glass system was fabricated according to the chemical formula 50B2O3 + 25Bi2O3 + (25-x) Li2O + xSrO2, utilizing the solid state- conventional method. It was noticed that The glass density increased from 4.821 to 5.952 g cm−3 whilst the molar volume was decreasing in the range from 32.93 to 30.44 cm3 mol−1 with increase the SrO2 insertion from 0 (BBLSr0 glasses) to 25 (BBLSr25) respectively. The structure of the fabricated glasses was inspected utilizing X-ray diffraction method which clarified that the insertion of SrO2 didn’t affect the amorphous nature of the tested samples. Furthermore, the UV–vis absorption spectrum was utilized to study the UV absorption characteristics for the fabricated glasses. The UV–vis absorption spectrum showed that the absorption and transition bands increase with insertion of the SrO2 contents. Based on the UV/Vis data, several important optical features were calculated like the energy gap (Eg), Urbach energy (Eu), oscillator energy (Eo) and energy of distribution (Ed). Increasing the SrO2 substitution ratio led to increase the optical properties where the refractive index was found to increase from 3.056 to 5.710.

A very interesting challenge concerns the elaboration of nanowires from organic polymers with the aim to design novel nanoelectronic devices. The new VK-Stilbene copolymer based on organic nanowires was developed and characterized in this context. The VK-Stilbene nanowires were made with a template method by filling nanopores of AOO membranes. The prepared nanowires wereinvestigated by morphological spectroscopy and micro-Raman Rinshaw analysis. The modifications of photoemissive properties from microscopy film to nanowires were described by steady-state optical techniques combinedwith time-resolved photoluminescence spectroscopy. A blue shift of the luminescence are observed in the case of nanowires proceed from structural order and shortening of effective conjugation lengths. Therefore, VK-Stilbene nanowires exhibit a remarkably quasi-exponential long-lived and blue-shifted ascribed to a confinement-effect of intra-chain singlet excitons. Additionally, these nano-objects show an increase in the quantum yield with respect to bulk samples. The acquired optical data confirm that VK-Stilbene nanomaterials may be suitable for nanotechnologies.

In this research, the radiation safety features and the optical properties of novel prepared glass samples with nominal compositions 45P2O5 + 25B2O3 + 20Bi2O3 + (10-x)Li2O+xCdO where x = 0, 2.5, 5, 7.5, and 10 have been studied. The XRD was utilized to exclude the crystal structure nature of the glass samples. The density of the samples increases while the molar volume decreases with the rise of the CdO incrementation ratio. The UV-Vis NIR spectroscopy was utilized to measure the absorbance rate of the fabricated glass sample. Based on the measured absorbance, some important parameters were evaluated, such as the energy gap, Urbach energy, refractive index. The Monte-Carlo simulation code was utilized to evaluate the radiation attenuation properties of the current glass samples in the energy range 0.015 till 15 MeV.

The nanostructured materials from Ag and Au@Ag core/shell bimetallic were synthesized by pulsed infrared laser ablation process in different liquid media technique in just one-pot step. By varying the surrounding media by metallic precursor solution and the laser energy, the monometallic nanoparticles were changed to bimetallic nanocomposites in a form of core/shell structure with tuning their shell thickness. The prepared nanostructured materials were examined by different spectroscopic techniques to inform their physicochemical properties. The characterization techniques proved that the crystallinity of prepared samples. Besides, the bimetallic nanocomposite structure has a core/shell form with Au in the core and Ag in shell. Also, as the laser intensity raises, the Ag-shell’s thickness grows, and the core/shell diameter increases, which was affected in their linear and nonlinear optical properties. Their linear properties were investigated depended on Mie theory. Besides, the nonlinear optical parameters were determined by Z-scan technique, which demonstrated that the nonlinear optical properties of a shell can be tuned depending on their thickness. The prepared core/shell nanocomposites with different particle sizes confirmed the capability for possible application in optoelectronic applications as good optical limiting materials.

A new glass system with a chemical formula (60-x) B2O3+20Bi2O3 +20Li2O+ xSm2O3: x = 0, 1.25, 2.5, 3.75 and 5 wt% was synthesized using the solid-state conventional approach. The density of the newly fabricated glasses was determined using the Archimedes method. The glasses’ structure was studied utilizing the X-ray diffraction spectroscopy. Moreover, some of the most effective optical features such as the refractive index (n), energy gap (Eg), and Urbach energy (Eu) were determined based on the absorbance obtained from the UV-visible spectrum. Furthermore, the radiation shielding capacity of the newly fabricated samples was assessed utilizing the Monte Carlo Modeling (MCNP 5) code and Phy-X/PSD software. The calculated mass attenuation coefficient (MAC) values at 0.015 MeV were observed to increase from 21.893 to 25.570 cm2 g−1 for glasses BBLS1 and BBLS5 respectively. Simulations demonstrated that the MAC of the fabricated glasses enhanced with the insertion of the Sm2O3 contents. Besides, the buildup factors (EBF and EABD) were calculated using the program Phy-X/PSD. The removal cross-section ƩR for the fast neutrons was theoretically calculated. The calculated results showed the ƩR varied in the range between 0.170 and 0.241 cm-1 for glasses BBLS1 and BBLS5 respectively. The recorded results depict that the insertion of Sm2O3 enhances the optical, gamma-ray, and neutron shielding capacities.

A novel glass system consists of six glasses was fabricated using melt quenching process according the chemical formula (60-x) B2O3+20Na2O2+20Bi2O3 +xWO3: x = 0, 1, 2, 3, 4 and 5 wt%. Archimedes method was used to determine the density and molar volume of the fabricated glasses. Moreover, the X-ray diffraction technique was used to show the variation of the amorphous phase with the addition of WO3 contents for the fabricated glasses. The optical features such as the refractive index (n), energy gap (Eg), distribution energy (Ed) and oscillation energy (Eo) were calculated based on the absorbance obtained from the UV-visible spectrum. The electromagnetic radiation (gamma ray) shielding capacity was evaluated using Monte Carlo simulation (MCNP 5) code in addition to Phy-X program. The results showed that the highest linear attenuation coefficient (LAC) occurred at 0.015 MeV and increased from 99.532 to 138.656 cm−1 for glasses coded as W 1 and W 6 respectively. The obtained results showed an enhancement of gamma ray shielding capacity with the addition of WO3 (wt%) to the fabricated glasses. Based on the estimated LAC, other shielding properties were calculated such as the glass half value layer (HVL), mean free path (MFP) and effective atomic number (Zeff). Finally, the ability of the fabricated glasses to resist the charged particles (alpha and proton) and uncharged neutrons were also estimated using SRIM program and theoretical calculation. The obtained results refer that the insertion of WO3 contents improves the shielding capacity for alpha and protons while it reduces the effective removal cross section of the fabricated glasses.

A series of six tungsten-based bismuth borate glasses with a xWO3- 20 Bi2O3- 20 Na2O2- (60-x) B2O3), 0≤ x ≤ 5 wt% chemical composition were synthesized by using the solid-state conventional method. The structures of the fabricated samples were studied with X-ray diffraction analysis. Optical features such as the energy gap (Eg), Urbach energy (Eu), steepness parameter (S), refractive index (n) and Fermi level energy (EF) were measured for the fabricated glasses with a UV–Vis–NIR spectrophotometer. Furthermore, a Monte Carlo simulation code (MCNP-5) was applied to estimate the gamma ray mass attenuation coefficient (MAC) for the fabricated glasses. The simulated data showed that the insertion of WO3 increases the MACs of the fabricated samples: the highest and lowest MACs were obtained for the W6 and W1 glasses, respectively. Then, the simulated MAC was used to calculate the mean free path (MFP) for all the fabricated glasses. The thinnest MFP was achieved by W6 (increasing from 0.007 to 70,560 between 0.015 and 15 MeV, respectively), while the thickest MFP was achieved by W1 (increasing from 0.0100 to 8.975 between 0.015 and 15 MeV, respectively). Moreover, new Phy-x/PD software was used to calculate MAC, MFP, equivalent atomic number (Zeq) and the exposure and energy absorption buildup factors (EBF and EABF). The simulated and calculated results showed that adding WO3 enhances the shielding properties of the synthesized glass.