Search

The GEMPix is a small gaseous detector with a highly pixelated readout, consisting of a drift region, three Gas Electron Multipliers (GEMs) for signal amplification, and four Timepix ASICs with 55 µm pixel pitch and a total of 262,144 pixels. A continuous flow of a gas mixture such as Ar:CO2:CF4, Ar:CO2 or propane-based tissue equivalent gas is supplied externally at a rate of 5 L/h. This article reviews the medical applications of the GEMPix. These include relative dose measurements in conventional photon radiation therapy and in carbon ion beams, by which on-line 2D dose images provided a similar or better performance compared to gafchromic films. Depth scans in a water phantom with 12C ions allowed measuring the 3D energy deposition and reconstructing the Bragg curve of a pencil beam. Microdosimetric measurements performed in neutron and photon fields allowed comparing dose spectra with those from Tissue Equivalent Proportional Counters and, additionally, to obtain particle track images. Some preliminary measurements performed to check the capabilities as the detector in proton tomography are also illustrated. The most important on-going developments are: (1) a new, larger area readout to cover the typical maximum field size in radiation therapy of 20 × 20 cm2; (2) a sealed and low-pressure version to facilitate measurements and to increase the equivalent spatial resolution for microdosimetry; (3) 3D particle track reconstruction when operating the GEMPix as a Time Projection Chamber. [ABSTRACT FROM AUTHOR]

Purpose: Commercially available systems for ion beam reference dosimetry in water are mainly based on ionization chambers. In those systems, a large number of small detectors are typically arranged in a two‐dimensional (2D) array or matrix to achieve high spatial resolution (order of several millimeters) and large field coverage at the same time. The goal of this work was to investigate the reliability of a detector of superior spatial resolution to perform three‐dimensional (3D) ionization measurements in carbon ion pencil beams. Methods: The GEMPix is a small gaseous detector with a highly pixelated readout, consisting of a drift region (with 2.8 cm3 × 2.8 cm3 × 0.3 cm3 volume), three gas electron multipliers (GEMs) for signal amplification and four Timepix ASICs with 55 µm pixel pitch and a total of 262,144 pixels. An integrated system was designed and built, which consists of a commercial water phantom with a three‐axis motorized arm, a reference large‐area ionization chamber for signal normalization to the beam output and the GEMPix itself. Measurements at different depths in water have been performed at the Italian National Centre for Oncological Hadrontherapy (CNAO) with three carbon ion beam energies. Lateral beam profiles measured with the GEMPix at the shallowest depth were compared to those measured with radiochromic EBT3 films in air in the position of the reference ionization chamber. The Timepix readout was calibrated in energy by using one independent depth scan with carbon ions of 150 mm range. Bragg peak curves were also simulated using the Monte Carlo FLUKA code as a reference. Results: Beam profiles measured with the GEMPix were smooth and showed similar shape and full width at half maximum when compared to those measured with radiochromic EBT3 films. Smooth, reproducible Bragg curves were obtained with statistical uncertainties of about 2%, matching FLUKA simulations of the Bragg curves within 15% for most data points. This difference is partially explained for the measurement with carbon ions of 150 mm range by a saturation effect in the GEMs. The high granularity of the readout allowed to produce 2D images of the deposited dose at different depths, as well as 3D data distributions. Conclusions: This paper demonstrates the capability of the GEMPix detector to measure the 3D dose distribution of carbon ions in water for a clinical pencil beam reliably. In the future, the detector area will be increased to cover fields of scanned beams. Measurements at higher beam intensities and with protons are planned. [ABSTRACT FROM AUTHOR]

The GEMTEQ is a gaseous detector with Gas Electron Multipliers for signal amplification and Timepix ASICS as highly pixelated readout. It is based on the GEMPix detector and designed for microdosimetry. This paper describes the vacuum chamber developed to house the three versions of the GEMTEQ and to operate the detector in sealed-mode and at low pressure. A sealed version avoiding the need of a gas system offers clear advantages for its transport and use, e.g., for measurements at a clinical particle therapy centre. Operating the detector at a pressure lower than atmospheric increases the spatial resolution, one of the key parameters in microdosimetry. A gas-tight detector housing, a pumping system, and a pressure and temperature monitoring system were developed and tested in operational conditions. These extensive tests have proven the vacuum chamber to be gas tight and well suited for the foreseen microdosimetric measurements: the GEMTEQ can be operated for several weeks at 1000 mbar without noticeable degradation of the detector signal. First measurements have been carried out successfully at pressure values as low as 200 mbar. Further tests are planned to reach the design goal of 10 mbar. Overall, the vacuum chamber fulfils the requirements for a sealed-mode and low-pressure operation of the GEMTEQ. Measurement campaigns using this setup for example for LET measurements in hadron beams have already been carried out and will be discussed in forthcoming papers. [ABSTRACT FROM AUTHOR]