Search

Herein, a stacked Ge/Cu nanowire (NW) laminate made by stacking several Ge/Cu nanowire laminates accompanied by the conductive glue adhesives is used to achieve high capacity output per unit area (>10 mA h cm–2). The combination of Cu NWs and conductive adhesives constructs a tough and conducting network through the electrode, and the stacked Ge/Cu nanowire laminate electrodes can load an ultrahigh mass of 14.8 mg Ge per unit area and provide an areal capacity output over 16 mA h cm–2. A full-cell with an areal capacity of 11 mA h cm–2 built by stacked Ge/Cu nanowire laminate anode and Li(Ni0.5Co0.3Mn0.2)O2 cathode was prepared and used to supply electricity for electronic devices, demonstrating their potential to be a candidate anode for high areal capacity Li-ion microbatteries that can be used for high-tech and integrated microsystems with limited space.

Metal nanowires are promising for their applications including electrical connectors, transparent conductive electrodes and conductive additives, but the use of metal nanowires as photothermal agents to convert light to heat has yet to be reported. Here we synthesized dispersible polyethylene glycol-coated (PEGylated) copper nanowires (CuNWs) and showed for the first time that PEGylated CuNWs were able to convert near-infrared (NIR, 808 nm) light into heat at a photothermal efficiency of 12.5%. The PEGylated CuNWs exhibited good reusability and enabled rapid temperature rise to50 °C in 6 min by NIR irradiation. The PEGylated CuNWs were flexible and intertwined around the cancer cells, which, upon NIR irradiation, allowed for direct heat transmission to cells and effectively triggered cancer cell ablation in vitro. Intratumoral injection of PEGylated CuNWs into colon tumor-bearing mice and ensuing NIR irradiation for 6 min significantly raised the local temperature to50 °C, induced necrosis, and suppressed tumor growth. Compared with other NIR light absorbing noble metal-based nanomaterials, PEGylated CuNWs are relatively easy to synthesize in both laboratory and large scales using the low cost copper. This study demonstrated the potential of PEGylated CuNWs as a new cost-effective photothermal agent, and paved a new avenue to using CuNWs for cancer therapy.

Large-area conducting transparent conducting electrodes (TCEs) were prepared by a fast, scalable, and low-cost spray deposition of copper nanowire (CuNW) dispersions. Thin, long, and pure copper nanowires were obtained via the seed-mediated growth in an organic solvent-based synthesis. The mean length and diameter of nanowires are, respectively, 37.7 μm and 46 nm, corresponding to a high-mean-aspect ratio of 790. These wires were spray-deposited onto a glass substrate to form a nanowire conducting network which function as a TCE. CuNW TCEs exhibit high-transparency and high-conductivity since their relatively long lengths are advantageous in lowering in the sheet resistance. For example, a 2 × 2 cm(2) transparent nanowire electrode exhibits transmittance of T = 90% with a sheet resistance as low as 52.7 Ω sq(-1). Large-area sizes (50 cm(2)) of CuNW TCEs were also prepared by the spray coating method and assembled as resistive touch screens that can be integrated with a variety of devices, including LED lighting array, a computer, electric motors, and audio electronic devices, showing the capability to make diverse sizes and functionalities of CuNW TCEs by the reported method.