Search

An enzymatic biosensor was fabricated by the covalent immobilization of pyruvate oxidase (PyO) onto the nano-particle comprised poly-5,2':5',2''-terthiophene-3'-carboxylic acid, poly-TTCA (nano-CP) layers on a glassy carbon electrode (GCE) for the amperometric detection of the phosphate ions. The direct electron transfer reaction of the immobilized PyO onto the nano-CP layers was investigated and the electron transfer rate constant was determined to be 0.65 s(-1). The electrochemically prepared nano-CP lowered the oxidation potential (+0.40 V versus Ag/AgCl) of an enzymatically generated H(2)O(2) by PyO in a phosphate solution. Experimental parameters affecting the sensitivity of the biosensors, such as amounts of the cofactors, the pH, the applied potential, and the temperature were optimized. A linear response for the detection of the phosphate ion was observed between 1.0 microM and 100 microM and the detection limit was determined to be about 0.3 microM. The response time of the biosensors was about 6s. The biosensor showed good selectivity towards other interfering anions. The long-term storage stability of the phosphate biosensor was studied and the sensor was applied in a human serum sample for the phosphate ions detection.

A new approach for an amperometric array sensor platform employing arrays of sensors in a 24-well cell culture plate format has been developed for simultaneous in vitro determination of nitric oxide (NO) and superoxide free radicals (O(2)(-)) produced by stimulated cells. The work reported focuses on the direct, real-time monitoring of extracellular production of these two analytes, as well as the effects of their interaction. The sensor platform was manufactured by a combination of sputtering gold electrodes and screen-printing carbon electrodes. The O(2)(-) sensor uses covalent immobilization of cytochrome c via a binder, DTSSP (3,3'-dithio-bis(sulphosuccinimidylpropionate) onto the surface of the Au electrodes, whereas the NO sensor system involves an NiTSPc (nickel tetrasulfonated phthalocyanine) film electrodeposited onto the surface of the carbon electrodes and subsequently covered with an external layer of Nafion. For in vitro demonstration of the platforms as a potential drug-screening system, A172 glioblastoma cells were cultured and transferred into the 24-well arrays. Simultaneous and direct monitoring of NO and O(2)(-) production as a response to chemicals of biomedical relevance was carried out. The results obtained demonstrated that it would be possible to envisage a drug screening platform for compounds designed to be inhibitors of nitric oxide synthase or to have an inhibitory effect on superoxide free radical production. By suitable modification of the electrodes employed it would also be possible to extend the platform to measure alternative species.

A combined, optospectroscopic and electrochemical assay system for the simultaneous monitoring of intra- and extracellular production of biologically important species has been developed and assessed. The present model system evaluates intra- and extracellular nitric oxide produced by stimulated glioblastoma multiform cell line (A172). The production of endogenous NO was induced by phorbol-12-myristate-13-acetate and inhibited by N(omega)-nitro-l-arginine methyl ester. Intracellular production of NO was monitored via fluorescence image analysis using a 4,5-diaminofluorescein probe, while extracellular NO release was monitored via a chemically modified electrode, which was incorporated into an optically transparent cell chip. The results indicated that there was no mutual interference between the optical and electrochemical measurement systems. The response time of the combined optical/electrochemical system was found to be in the range of a few tens of seconds.

A disposable amperometric immunosensor was studied for the rapid detection of carp (Carassius auratus) Vitellogenin (Vtg). The sensor was fabricated based on screen-printed carbon arrays (SPCAs) containing eight carbon working and an integrated carbon counter electrodes. To construct the sensor, a conducting polymer (poly-terthiophene carboxylic acid) was electropolymerized on the surface of working electrodes and the polymer-coated SPCAs was characterized by SEM. Horseradish peroxidase (HRP) and a monoclonal antibody (anti-Vtg) specific to carp Vtg were covalently attached onto the polymer modified SPCAs. The immobilization of HRP and anti-Vtg onto the polymer-coated SPCAs was examined using cyclic voltammetry and quartz crystal microbalance studies. In order to detect the amount of Vtg, glucose oxidase (GOx)-labelled Vtg bound to the sensor surface under competition with the Vtg analyte was quantified amperometrically using glucose as a substrate. The performance of the eight sensors in arrays was evaluated by obtaining the calibration plots for Vtg. The sensor arrays exhibit a linear range of the Vtg concentration from 0.25 to 7.8 ng/ml and the detection limit was determined to be 0.09 ng/ml. Furthermore, the performance of the immunosensor for the determination of Vtg was evaluated by a standard addition method performed in fish serum samples.

A new disposable amperometric bi-enzyme sensor system for detecting phenols has been developed. The phenol sensor developed uses horseradish peroxidase modified screen-printed carbon electrodes (HRP-SPCEs) coupled with immobilized tyrosinase prepared using poly(carbamoylsulfonate) (PCS) hydrogels or a poly(vinyl alcohol) bearing styrylpyridinium groups (PVA-SbQ) matrix. Optimization of the experimental parameters has been performed with regard to buffer composition, pH, operating potential and storage stability. A co-operative reaction involving tyrosinase and HRP occurs at a potential of -50 mV versus Ag/AgCl without the requirement for addition of extraneous H(2)O(2), thus, resulting in a very simple and efficient system. Comparison of the electrode responses with the 4-aminoantipyrine standard method for phenol sample analysis indicated the feasibility of the disposable sensor system for sensitive "in-field" determination of phenols. The most sensitive system was the tyrosinase immobilized HRP-SPCE using PCS, which displayed detection limits for phenolic compounds in the lower nanomolar range e.g. 2.5 nM phenol, 10 nM catechol and 5 nM p-cresol.

A simple electrochemical deposition method for the immobilization of protein-conjugated graphene onto an electrode has been developed. A unique one-step electrochemical deposition of cytochrome c (Cyt c) conjugated with electrochemically reduced graphene oxide ( ErGO) onto the surface of glassy carbon electrode ( GCE) without any cross-linkers and the direct electron transfer between Cyt c and the electrode was obtained by the Cyt c- ErGO-modified GCE. The characteristics of the ErGO-Cyt c-modified GCE were compared with those of an ErGO-modified GCE without Cyt c. The direct electron transfer rate constant ( ket) was found to be 6.2/s. This approach provides an avenue for the immobilization of various proteins and enzymes with ErGO and could be expanded for diverse biosensor applications. [ABSTRACT FROM AUTHOR]