Search

The attractive structural and mechanical properties of cellulose substrates (paper, cloth, and thread), including passive fluid transport, biocompatibility, durability, and flexibility, have attracted researchers in the past few decades to explore them as alternative microfluidic platforms. The incorporation of electrochemical (EC) sensing broadened their use for applications such as clinical diagnosis, pharmaceutical chemical analyses, food quality, and environmental monitoring. This article provides a review on the microfluidic devices constructed on paper, cloth, and thread substrates. It begins with an overview on paper-based microfluidic devices, followed by an in-depth review on the various applications of EC detection incorporated on paper-based microfluidic devices reported to date. The review on paper-based microfluidic devices attempts to convey a few perspective directions that cloth- and thread-based microfluidic devices may take in its development. Finally, the research efforts on the development and evaluation, as well as current limitations of cloth- and thread-based microfluidic devices are discussed. Microfluidic devices constructed on paper, cloth, and thread substrates are still at an early development stage (prototype) requiring several improvements in terms of fabrication, analytical techniques, and performance to become mature platforms that can be adapted and commercialized as real world products. However, they hold a promising potential as wearable devices. [ABSTRACT FROM AUTHOR]

The use of multilayer of gold nanoparticles (AuNPs) attached on gold electrode surface via thiol chemistry to fabricate an ammonium (NH4+) ion biosensor based on alanine dehydrogenase (AlaDH) was investigated. The approach of the study was based on construction of biosensor by direct deposition of AuNPs and 1,8-octanedithiol (C8-DT) onto the gold electrode surface. For the immobilisation of enzyme, 2-mercaptoethanol (2BME) was first covalently attached to AlaDH via esther bonding and then followed by chemically attached the 2BME-modified AlaDH (2BME-AlaDH) moiety onto the AuNPs electrode via the exposed thiol group of 2BME. The resulting biosensor response was examined by means of amperometry for the quantification of NH4+ ion. In the absence of enzyme attachment, the use of three layers of AuNPs was found to improve the electrochemistry of the gold electrode when compared with no AuNPs was coated. However, when more than three layers of AuNPs were coated, the electrode response deteriorated due to excessive deposition of C8-DT. When AlaDH was incoporated into the AuNPs modified electrode, a linear response to NH4+ ion over the concentration range of 0.1-0.5mM with a detection limit of 0.01mM was obtained. In the absence of AuNPs, the NH4+ ion biosensor did not exhibit any good linear response range although the current response was observed to be higher. This work demonstrated that the incorporation of AuNPs could lead to the detection of higher NH4+ ion concentration without the need of dilution for high NH4+ ion concentration samples with a rapid response time of <1 min. [ABSTRACT FROM AUTHOR]

Vibrio cholerae is a Gram-negative bacterium that causes cholera, a diarrheal disease. Cholera is widespread in poor, under-developed or disaster-hit countries that have poor water sanitation. Hence, a rapid detection method for V. cholerae in the field under these resource-limited settings is required. In this paper, we describe the development of an electrochemical genosensor assay using lyophilized gold nanoparticles/latex microsphere (AuNPs–PSA) reporter label. The reporter label mixture was prepared by lyophilization of AuNPs–PSA–avidin conjugate with different types of stabilizers. The best stabilizer was 5% sorbitol, which was able to preserve the dried conjugate for up to 30 days. Three methods of DNA hybridization were compared and the one-step sandwich hybridization method was chosen as it was fastest and highly specific. The performance of the assay using the lyophilized reagents was comparable to the wet form for detection of 1 aM to 1 fM of linear target DNA. The assay was highly specific for V. cholerae , with a detection limit of 1 fM of PCR products. The ability of the sensor is to detect LAMP products as low as 50 ng µl −1 . The novel lyophilized AuNPs–PSA–avidin reporter label with electrochemical genosensor detection could facilitate the rapid on-site detection of V. cholerae . [ABSTRACT FROM AUTHOR]