Search

Metal carbides are promising materials for electrocatalytic reactions such as water electrolysis. However, for application in catalysis for the oxygen evolution reaction (OER), protection against oxidative corrosion, a high surface area with facile electrolyte access, and control over the exposed active surface sites are highly desirable. This study concerns a new method for the synthesis of porous tungsten carbide films with template‐controlled porosity that are surface‐modified with thin layers of nickel oxide (NiO) to obtain active and stable OER catalysts. The method relies on the synthesis of soft‐templated mesoporous tungsten oxide (mp. WOx) films, a pseudomorphic transformation into mesoporous tungsten carbide (mp. WCx), and a subsequent shape‐conformal deposition of finely dispersed NiO species by atomic layer deposition (ALD). As theoretically predicted by density functional theory (DFT) calculations, the highly conductive carbide support promotes the conversion of Ni2+ into Ni3+, leading to remarkably improved utilization of OER‐active sites in alkaline medium. The obtained Ni mass‐specific activity is about 280 times that of mesoporous NiOx (mp. NiOx) films. The NiO‐coated WCx catalyst achieves an outstanding mass‐specific activity of 1989 A gNi−1 in a rotating‐disc electrode (RDE) setup at 25 °C using 0.1 m KOH as the electrolyte. [ABSTRACT FROM AUTHOR]

Graphical abstract Highlights • Introduction of colloidal Pt nanoparticles in ordered mesoporous carbon (OMC). • Carbonized PtNP/OMC coatings are homogeneous, conductive and show high surface area. • Nanoparticles retain size despite high temperatures due to pore confinement effects. • Coatings attach without binder which would block active sites or pores. • PtNP/OMC coatings reach two times higher activities in HER than commercial Pt/C. Abstract Platinum is the best catalyst known so far for the hydrogen evolution reaction (HER) in acidic environments, but it is also a scarce and expensive resource. Maximizing its performance per metal atom is essential in order to reduce costs. The deposition of small Pt nanoparticles (2–3 nm) onto electrically conductive, highly accessible and stable carbon supports leads to active catalysts. However, blocking of pores and active sites by Nafion, which acts as a binding species, reduces the catalytic activity. Moreover, inaccessible Pt located in micropores diminishes an efficient exploitation of the noble metal. We report a new synthesis approach to ordered mesoporous carbon (OMC) coatings with preformed Pt nanoparticles. The particles are exclusively located inside the mesopores. Furthermore, no Nafion binder is needed. As a consequence, the PtNP/OMC catalyst film outperforms Pt/C catalysts reported in literature particularly at high current densities. PtNP/OMC catalyst films with a geometric Pt loading of 1.6 µg Pt /cm2 achieve a current density of −100 mA/cm2 at an overpotential of ca. −70 mV. [ABSTRACT FROM AUTHOR]

Efficient water electrolysis requires electrode coatings with high catalytic activity. Platinum efficiently catalyzes the hydrogen evolution reaction in acidic environments, but is a rare and expensive metal. The activity achieved per metal atom can be increased if small Pt particles are dispersed onto electrically conductive, highly accessible and stable support materials. However, the addition of Nafion, a typical binder material used in the manufacture of electrode coatings, can decrease catalytic activity by the blocking of pores and active surface sites. A new approach is reported for the direct synthesis of highly active Nafion-free Pt/C catalyst films consisting of small Pt nanoparticles supported in size-controlled mesopores of a conductive carbon film. The synthesis relies on the co-deposition of suitable Pt and C precursors in the presence of polymer micelles, which act as pore templates. Subsequent carbonization in an inert atmosphere produces porous catalyst films with controlled film thickness, pore size and particle size. The catalysts clearly outperform all Nafion-based Pt/C catalysts reported in the literature, particularly at high current densities. [ABSTRACT FROM AUTHOR]

Ni-Fe oxyhydroxides are the most active known electrocatalysts for the oxygen evolution reaction (OER) in alkaline electrolytes and are therefore of great scientific and technological importance in the context of electrochemical energy conversion. Here we uncover, investigate, and discuss previously unaddressed effects of conductive supports and the electrolyte pH on the Ni-Fe(OOH) catalyst redox behavior and catalytic OER activity, combining in situ UV-vis spectro-electrochemistry, operando electrochemical mass spectrometry (DEMS), and in situ cryo X-ray absorption spectroscopy (XAS). Supports and pH > 13 strongly enhanced the precatalytic voltammetric charge of the Ni-Fe oxyhydroxide redox peak couple, shifted them more cathodically, and caused a 2-3-fold increase in the catalytic OER activity. Analysis of DEMS-based faradaic oxygen efficiency and electrochemical UV-vis traces consistently confirmed our voltammetric observations, evidencing both a more cathodic O2 release and a more cathodic onset of Ni oxidation at higher pH. Using UV-vis, which can monitor the amount of oxidized Ni+3/+4 in situ, confirmed an earlier onset of the redox process at high electrolyte pH and further provided evidence of a smaller fraction of Ni+3/+4 in mixed Ni-Fe centers, confirming the unresolved paradox of a reduced metal redox activity with increasing Fe content. A nonmonotonic super-Nernstian pH dependence of the redox peaks with increasing Fe contentdisplaying Pourbaix slopes as steep as -120 mV/pHsuggested a two proton-one electron transfer. We explain and discuss the experimental pH effects using refined coupled (PCET) and decoupled proton transfer-electron transfer (PT/ET) schemes involving negatively charged oxygenate ligands generated at Fe centers. Together, we offer new insight into the catalytic reaction dynamics and associated catalyst redox chemistry of the most important class of alkaline OER catalysts. [ABSTRACT FROM AUTHOR]