Search

The role of inter-bundle resistive barriers (metal sheet wraps), introduced to reduce the inter-bundle coupling loss in multistage cabled Cable-In-Conduit Conductors (CICC) for the International Thermonuclear Experimental Reactor (ITER) is evaluated, based on results gained recently on short sample experiments in the Twente Cable Press and SULTAN. The obvious benefit of limiting the inter bundle coupling loss unavoidably goes together with impeding the redistribution of nonuniform currents in the coil winding introduced at the terminations, as well as reduction of the heat exchange between the bundles. Six-element numerical electromagnetic code simulations are presented that qualitatively explain the effect of wraps on the DC performance, strongly depending on the testing geometry. The computations illustrate that wraps can reduce the DC performance in short sample tests. At the same time simulations of the Poloidal Field Coil Insert (PFCI), with a winding length of 50 m, have shown that omitting sub-stage wraps, can even degrade the DC performance of coils due to the short current transfer length in combination with current nonuniformity causing peak voltages in the most overloaded petals

The large Cable-In-Conduit Conductors (CICC) designed for the magnet coils in the International Thermonuclear Experimental Reactor (ITER), are composed of Nb/sub 3/Sn strand bundles in a Stainless Steel (SS) or Incoloy conduit. Both, the thermal contraction of the strand composite and the conduit material, define the final pre-strain after cooling down and thus affect the strand critical current (I/sub c/). The transverse forces, introduced when charging a coil, in addition affect the overall strain state due to bending and pinching of strands. Recently, periodic bending tests were applied on strand samples without additional axial compressive pre-strain. Here we explore the method of swaging a SS-tube around a strand to imitate the cool-down strain effect of the conduit. The experimental results of the I/sub c/ measurements at 12 T and 4.2 K are presented for a Nb/sub 3/Sn PIT strand with and without swaged SS tube on both Ti-6Al-4V and SS standard ITER sample holder (barrels). The effect of gluing the sample to the barrel is also investigated. The intrinsic strain state of the samples is verified by measurement of the I/sub c/ versus applied strain with the Pacman spring.

The combination of current up to 50 kA and magnetic field of 13 T in the Cable-In-Conduit Conductors (CICC) for the coils in the International Thermonuclear Experimental Reactor (ITER), cause huge local transverse forces. This results in changes in the transport properties, friction and anomalous contact resistance versus force behavior. The latest design optimizations tend to go toward a lower void fraction (VF). This has an impact on the evolution of the coupling loss and on the possible degree of strand bending and deformation. Toroidal Field Model Coil (TFMC) type of conductors with VFs of 26%, 30% and 36% respectively, are tested in the Twente Cable Press, by which a variable (cyclic) transverse force of 650 kN/m is transferred directly to a cable section of 400 mm length at 4.2 K. The AC loss of the conductor, the inter-strand and strand-bundle resistance (R/sub c/) in the cable and the associated bundle deformation are examined during mechanical cycling. The test results are discussed in view of the previous results on Nb/sub 3/Sn ITER CICCs.

A-priori knowledge of the normal zone development in MgB/sub 2/ conductors is essential for quench protection of applications. Therefore the normal zone propagation in a monofilament MgB/sub 2//Fe conductor under near-adiabatic conditions at 4.2 K has been measured and simulated. The results show normal zone propagation velocities up to several meters per second. In addition, by including the voltage-current relation into the computational model, the influence of the n-value on the normal zone propagation is determined. The simulations show that lower n-values suppress the normal zone propagation velocity due to lower heat generation in the MgB/sub 2/ filaments.

Methods have been developed to study the distribution of the transport current among the strand bundles of cable-in-conduit conductors (CICC) by using self-field measurements with Hall probe arrays. The unbalance in the transport current is mainly caused by the unavoidable nonuniformity of the joints and can be a reason for a change in the voltage-temperature characteristic and consequently of the temperature margin. In the present study we focus on the reconstruction of the current unbalance in a full size NbTi CICC tested in the SULTAN test facility. The crucial point in the reconstruction procedure is the proper choice of the reference self-field profile corresponding to a uniform current distribution. To achieve this uniform distribution, the conductors were driven far into the current sharing regime. The self-field profile corresponding to the highest achieved voltage level was taken as a reference. This assumption is supported by the modeling of current-sharing runs in the CUDI-CICC network model. Furthermore, local redistribution effects were observed in the conductors at high currents. The current transfer associated with this redistribution is analyzed as well.

The design of HTS magnets is often based on the properties of a number of short samples that are presumed to be representative of the conductor to be used. Variability in conductor properties and inhomogeneity in the magnetic field distribution within the magnets, coupled with conductor anisotropy, provide a significant challenge to accurately predict the field dependence of the magnet critical current. This work is based on measured superconducting properties of Bi-2212 and Bi-2223 conductors at 4.2 K in parallel and perpendicular magnetic fields up to 33 T. Properties of double pancake units and stacks, from the same or similar conductor batches, are presented, based on measurements at self-field and in applied co-axial background magnetic fields up to 19 T. Modeling of this data is based on short sample properties in perpendicular field; the average grain misalignment is used as the parameter to quantify the anisotropy. Correlations and discrepancies between the measured data and models based on short sample data are discussed for Bi-2212 and Bi-2223 conductors.