Search

A highly sensitive, large throughput and wide dynamic range (in the aspect of size and material type) broadband tunable microwave interferometer based rectangular waveguide wear debris detection system is presented. Passing of (non)ferrous and (non)conductive particles through the sensor, which causes inductance and/or capacitance changes, are detected as transmission signal variations of the system. We first demonstrate the sensing principle with the aluminum particle of 800 μm and epoxy resin particle of 1 mm3 at 6 GHz. Then, the effects of particle size and flow speed are tested with aluminum particles ranging from 200 μm to 1.8 mm. The measurement results show that the system is able to measure particle sizes with known material and differentiate nonconductive particles from conductive ones. With the proposed data processing techniques, this system is capable of detecting as small as 76 μm particles within an 8 mm outer diameter tube. And with future improvements on sensitivity and particle material characterization, the proposed system has the potential to differentiate (non)ferrous and (non)conductive particles and measure their sizes as a real-time wear debris sensing devices for rotating and reciprocating machines.

The design of a Ku-band reconfigurable reflectarray antenna for emergency satellite communications is presented. Bidirectional high data rate satellite links are needed in emergency conditions where other telecommunication infrastructures are not available. In order to operate in this type of scenario, an antenna should be deployable, transportable, and easily repointable. The need of an automatic and fast satellite location and pointing system leads to a completely electronic reconfigurable antenna. The operative bandwidth is from 10.7 to 12.5 GHz for reception and from 14 up to 14.5 GHz for transmission (30% of relative bandwidth). The selected antenna architecture is based on a dual reflectarray system comprising a passive subreflectarray and an active main reflectarray made of reconfigurable 1-bit elementary cells based on PIN diodes.

This paper presents recent advances on reconfigurable reflectarrays at the University of Perugia. In particular, the activities carried out in the framework of the FP7 project ARASCOM (“MEMS and Liquid Crystal based” Agile Reflectarray Antennas for Security and COMmunication). As for ARASCOM outcomes, the purpose of the project is the design of a very large reconfigurable reflectarray controlled with micro-electro-mechanical systems (MEMS) for mm-wave imaging system at 76.5 GHz. A system with sufficient resolution to detect concealed weapons impose challenging requirements on the antenna, which shall be made of hundreds of thousands elements. The problem has been addressed by exploiting some innovative solutions and architectures that will be described in this document. In particular, the dimensioning of the reflectarray, the proposed 1-bit geometry of elementary cell, and the innovative biasing control architecture are reported together with the MEMS design and fabrication and the experimental results of a demonstrating board that validated the adopted procedure.