Search

In this paper, a model fusion method (MFM) is proposed for online state of charge (SOC) and state of power (SOP) co-estimation of lithium-ion batteries (LIBs) in electric vehicles (EVs). Firstly, a particle swarm optimization-genetic algorithm (PSO-GA) method is cooperated with a 2-RCCPE fractional-order model (FOM) to construct battery open-circuit voltage (OCV)-SOC curve, which only relies on a part of dynamic load profile without the prior knowledge of an initial SOC. Secondly, a dual extended Kalman filter (DEKF) algorithm based on a 1-RC model is employed to identify the model parameters and estimate battery SOC with the extracted OCV-SOC curve. Furthermore, battery polarization dynamics in a SOP prediction window is analyzed from two aspects: (1) self-recovery; and (2) current excitation. They are separately simulated using 2-RCCPE FOM and 1-RC model, and then integrated through a model fusion for online SOP estimation, which enables an analytical expression of battery peak charge/discharge current in a prediction window without weakening the nonlinear characteristic of FOM. Experimental results demonstrate the improved performance of the proposed MFM for online discharge SOP estimation, where the mean absolute error and root mean square error are only 0.288 W and 0.35 W, respectively, under the urban dynamometer driving schedule profile. [ABSTRACT FROM AUTHOR]

Battery models are the cornerstone to battery state of charge (SOC) estimation and battery management systems in electric vehicles. This paper proposes a novel fractional-order model for a battery, which considers both Butler–Volmer equation and fractional calculus of constant phase element. The structure characteristics of the proposed model are then analyzed, and a novel identification method, which combines least squares and nonlinear optimization algorithm, is proposed. The method is proven to be efficient and accurate. Based on the proposed model, a fractional-order unscented Kalman filter is developed to estimate SOC, while singular value decomposition is applied to tackle the nonlinearity of Butler–Volmer equation and fractional calculus of constant phase element. The systematic comparison between the proposed model and traditional fractional order model is carried out on two LiNiMnCo lithium-ion batteries at different temperatures, ageing levels, and electric vehicle current profiles. The comparison results show that the proposed model has higher estimation accuracy in battery terminal voltage and SOC than the traditional model over wide range of temperature and ageing level under electric vehicle operation conditions. Furthermore, the hardware-in-the-loop test validates that the proposed SOC estimation method is suitable for SOC estimation in electric vehicles. [ABSTRACT FROM AUTHOR]

Accurate state-of-charge (SoC) estimation is remarkably difficult due to nonlinear characteristics of batteries and complex application environment in electric vehicles (EVs), particularly low temperature and low SoC. In this paper, an improved battery model is first built using a feedforward neural network (FFNN) by introducing newly defined inputs. Based on the FFNN model and the extended Kalman filter algorithm, a FFNN-based SoC estimation method is designed, and its robustness is verified and discussed using the experimental data obtained at different temperatures. Finally, a hardware-in-loop test bench is built to further evaluate the real-time and generalization of the designed FFNN model. The results show that the SoC estimation can converge to the reference value at erroneous settings of an initial SoC error and an initial capacity error, and the SoC estimation errors can be stabilized within 2% after convergence, which applies to all the cases discussed in this paper, including low temperature and low SoC. This indicates that the FFNN-based method is an effective method to estimate SoC accurately in complex EV application environment. • Battery model is built using a feedforward neural network with newly defined inputs. • The SoC estimation method performs well even at low SoC and low temperature. • The proposed method can result in a good accuracy even using an inaccurate capacity. • The effectiveness of the method is verified by hardware-in-loop test. [ABSTRACT FROM AUTHOR]

• An improved model with the voltage as input and current as output (VICO) is proposed. • The established VICO model is extended to an n -order VICO model. • The fault diagnosis method of current sensor is realized with the first-order VICO model. • The adaptability under different operating conditions and merit in detecting time are verified. Battery management systems (BMSs) are very important to ensure the safety of electric vehicles. The normal operation of BMSs is highly dependent on the accuracy of battery sensors. The present fault diagnosis efficiency of current sensors is much lower than that of voltage sensors due to model limitations in conventional methods. In this paper, a fault diagnosis method based on an improved model with voltage as input and current as output (VICO) is proposed to detect current sensor faults, where the least squares method combined with the unscented Kalman filter is used to estimate the fault current of current sensor. By comparing the estimated fault current with the diagnosis threshold, the fast fault diagnosis of current sensor is realized. The proposed method is verified under different operating conditions and compared with the methods based on state of charge and open-circuit voltage residuals. To highlight the importance of the proposed method, the influence and possible causes of minor faults and temperature on diagnosis are analyzed. The experimental results show that the method can detect the fault of the current sensor more accurately and quickly compared with the conventional methods, and has the ability to detect minor faults and adaptability under different operating conditions and temperatures. [ABSTRACT FROM AUTHOR]