Search

This article presents a fully integrated quadrature cross-coupled voltage controlled oscillator (QVCO) using common-drain transistor instead of common-source transistor as a coupling device.The prototype 3.8 GHz QVCO in 0.18 μm CMOS process is proposed to generate four output phases and it uses two p-core cross-coupled VCOs and nMOS coupling devices. The proposed QVCO oscillates from 3.6 to 3.84 GHz and the power consumption is 7.24 mW at 0.74 V supply voltage. The measured phase noise is -126.19 dBc/Hz at 1 MHz offset frequency from the carrier frequency 3.745 GHz. The VCO occupies a chip area of 1.08 ×0.924 mm2 and provides a figure of merit of -189.05 dBc/Hz. © 2013 Wiley Periodicals, Inc. Microwave Opt Technol Lett 55:1262-1266, 2013; View this article online at wileyonlinelibrary.com. DOI 10.1002/mop.27578 [ABSTRACT FROM AUTHOR]

This article proposes a dual-resonance CMOS LC-tank injection-locked frequency doubler (ILFD) fabricated in the 0.18 μm CMOS process and describes the circuit design, operation principle, and measurement results of the ILFD. The ILFD circuit is composed of a dual-resonance first-harmonic injection-locked oscillator with dual-injection ports, a wide-band frequency doubler, and a transformer balun. At the supply voltage of 0.7 V, the dc power consumption is 5.39 mW. At the incident power of 0 dBm, the ILFD has high/low operation range from the incident frequency 3.9/1.7 to 6.1/2 GHz to provide a dual-band signal source with the frequency 7.8/3.4-12.2/4 GHz. © 2011 Wiley Periodicals, Inc. Microwave Opt Technol Lett 54:193-196, 2012; View this article online at wileyonlinelibrary.com. DOI 10.1002/mop.26501 [ABSTRACT FROM AUTHOR]

This letter proposes a dual-band divide-by-2 transformer-coupled quadrature injection-locked frequency divider (QILFD).The QILFD is composed of a transformer-coupled quadrature voltage controlled oscillator and two injection MOSFETs. The CMOS QILFD has been implemented with the Taiwan Semiconductor Manufacture Company (TSMC) 0.18 μm CMOS technology, and the core power consumption is 3.997 mW at the supply voltage of 0.7 V. The tank impedance of the QILFD shows a dual resonance behavior, which leads to a dual-band locking range at a fixed bias condition. At the injection input power of 3 dBm, the low-band and high-band divide-by-2 locking ranges are from 6.90 to 8.56 GHz and 9.52 to 12.10 GHz, respectively. © 2011 Wiley Periodicals, Inc. Microwave Opt Technol Lett, 2011; View this article online at wileyonlinelibrary.com. DOI 10.1002/mop.26074 [ABSTRACT FROM AUTHOR]

Abstract: A K-band differential Colpitts voltage-controlled oscillator (VCO) is designed and implemented in a 0.13μm CMOS 1P8M process. The designed circuit topology consists of two single-ended Colpitts LC-tank VCOs, and the differential VCO is obtained by using a cross-coupled nMOS pair and a transformer. At the supply voltage of 1.2V, the output phase noise of the VCO is −113.08dBc/Hz at 1MHz offset frequency from the carrier frequency of 20.78GHz, and the figure of merit is −191.49dBc/Hz. Total power consumption is 6.24mW. Tuning range is about 980MHz, from 19.84 to 20.82GHz, while the control voltage was tuned from 0V to 1.2V. [Copyright &y& Elsevier]

Abstract: This paper presents a new divide-by-2 quadrature injection-locked frequency divider (QILFD). The QILFD consists of a new transformer-coupled quadrature voltage controlled oscillator (QVCO) with the voltage–current feedback technique and two NMOS switches, which are in parallel with the QVCO resonators for signal injection. The proposed CMOS QILFD has been implemented with the TSMC 0.35μm CMOS technology and the core power consumption is 16.52mW at the supply voltage of 2.2V. The free-running frequency of the QILFD is tunable from 2.85GHz to 3.07GHz. At the input power of 0dBm, the divide-by-2 operation range is from 5.48GHz to 6.48GHz. The phase deviation of free running quadrature output is about 0.53°. [Copyright &y& Elsevier]