Search

In this article, a new active building component with electronically tunable transresistive block, voltage difference transresistance amplifier, and its floating frequency dependent negative resistor simulator circuit application is presented. The simulator circuit is shown to operate using single active building block with two grounded passive components, to be electronically tunable over its value which is controlled by an independent current source, not to require any conditions of component matching and to have good sensitivity performance with respect to tracking errors. To examine functionality of the design, a CRD band-pass filter example is given. Numerous simulation program with integrated circuit emphasis (SPICE) simulations are performed and depicted through the article to verify validity of the study. Taiwan semiconductor manufacturing company (TSMC) 0.18 µm complementary metal oxide semiconductor technology parameters are used through simulations. [ABSTRACT FROM AUTHOR]

In this study, both current and transimpedance mode instrumentation amplification operations are met through a new active building block proposal, namely Current DifferencingTransresistance Amplifier block, CDTRA. In order to regard CDTRA as an instrumentation amplifier (IA), two grounded passive resistors are needed. Passive resistors together with electronically tunable transresistance parameter of active block, r m , set versatility over gain tunability for instrumentation amplifier. Proposed active block is current input, current/voltage output design. It has low impedance input, high impedance for current output, and low impedance for voltage output respectively. Since this particular IA is based on CDTRA, then it inherits these electrical characteristics fully. Numerous SPICE simulations are performed through the paper to verify validity of the study. TSMC 0.18 µm CMOS technology parameters are utilized through simulations. Experimental work is performed for the proposed IA circuit. [ABSTRACT FROM AUTHOR]

In this paper, new analog memristor emulator circuits based on current backward transconductance amplifier (CBTA) and passive elements are proposed. They emulate both types of memristor (incremental and decremental) just by interchanging the CBTA output terminals. It uses only one CBTA, two resistors, one capacitor and one multiplier emulating grounded memristor. They consist of less CMOS transistors and have wider output ranges compared to other designed emulator circuits. The CMOS implementation of the CBTA using 0.18 μm level-7 TSMC CMOS technology parameters is also proposed. It uses 23 CMOS transistors operating with the ±0.9 V DC supply voltage. Theoretical derivations and related results are validated using SPICE simulations. [ABSTRACT FROM AUTHOR]