Search

The power grid is transforming with large amounts of distributed energy resource (DER) integration that is impacting the bulk power system planning and operations. Grid regulators have identified that traditional power system analysis techniques are challenged under the changing grid conditions. Transmission and distribution (T&D) co-simulation is an effective methodology to accurately account for the changing power-grid. A scalable multitimescale T&D (SMTD) co-simulation framework is developed with commercial transmission system solver that can handle large-scale system models, and distribution system solver that can model the distribution systems in detail with dynamic models of load and DER. In this article, PSS/E and GridLAB-D are combined using a Python interface with Hierarchical Engine for Large-scale Infrastructure Co-Simulation software to enable T&D co-simulation. This framework is scalable and parallel computing compatible that enables large-scale system simulation and adoption of T&D co-simulation by the industry and utilities. The SMTD cosimulator is designed to integrate with existing system models and new ones. The article also highlights functional specifications for the T&D co-simulation solvers and models along with providing the algorithms for the steady state, quasi-steady state, and dynamic T&D co-simulation. In context of changing power grid, future power grid planning, validation of controls under critical contingencies and validation of various wide area monitoring and controls can effectively utilize the proposed framework that can capture the T&D interactions accurately. The SMTD cosimulator can also be used to generate realistic synthetic measurement-data with noise and packet drop for uncommon grid events enabling development and validation of power system data analytics and controls. [ABSTRACT FROM AUTHOR]

This paper develops a comprehensive dynamic-phasor-based small-signal model for the modular multilevel converter (MMC) system under unbalanced grid conditions, which takes into consideration the dynamics of the MMC system under a balanced grid condition as well as the other emerging internal harmonics produced by the unbalanced grid components and more complex controllers. The small-signal model is validated by comparing the time-domain responses from a detailed electromagnetic transient (EMT) simulation in PSCAD/EMTDC. Based on the eigen-analysis and PSCAD-based time-domain simulation studies, this paper reveals the poorly damped modes that cause unstable oscillations in MMC system under the unbalanced grid conditions. From the results, more poorly damped modes involved in the internal harmonics are emerging under unbalanced grid conditions compared with the modes under the balanced grid conditions, and can highly impact the system dynamic behaviors by the selection of the control parameters. It is also shown that, under the unbalanced grid conditions, the feasible region of the control parameters of the vector current control gets narrowed indicating the reduction of the stability margin, smaller (larger) value of proportional (integral) gain of the circulating current suppressing controller can enhance the system stability, and larger values of the proportional and integral gains of the negative-sequence current suppressing control can result in the harmonic instability of the MMC system. Besides, the parameters of multiple complex-coefficient filters for positive- and negative-sequence components extraction also have a big impact on the small-signal stability of the MMC system and are required to be properly selected. [ABSTRACT FROM AUTHOR]

The system frequency response (SFR) model describes the average network frequency response after a disturbance and has been applied to a wide variety of dynamic studies. However, the traditional literature does not provide a generic, analytical method for obtaining the SFR model parameters when the system contains multiple generators; instead, a numerical simulation-based approach or the operators’ experience is the common practice to obtain an aggregated model. In this paper, an analytical method is proposed for aggregating the multi-machine SFR model into a single-machine model. The verification study indicates that the proposed aggregated SFR model can accurately represent the multi-machine SFR model. Furthermore, the detailed system simulation illustrates that the SFR model can also accurately represent the average frequency response of large systems for power system dynamic studies. Finally, three applications of the proposed method are explored, with system frequency control, frequency stability, and dynamic model reduction. The results show the method is promising with broad potential applications. [ABSTRACT FROM AUTHOR]

Interarea power oscillation damping enhancement in large interconnected power systems is often accomplished using supplementary controls at the synchronous machines involved and with the use of flexible ac transmission system devices. The power system literature has demonstrated that wide area signals could be more effective than the local signals for these controllers. In some cases where phasor measurement units are used, all the required control signals may not be available. To alleviate these cases, control signals are obtained using estimated signals from a “dynamic state estimator,” and a robust supplementary controller is deployed. In this paper, the cited strategy is illustrated using a static var compensator. The feasibility of the proposed method has been demonstrated on the IEEE 50-generator test system. [ABSTRACT FROM AUTHOR]

Successful vector control for grid connection of renewable power generation relies on accurate and fast tracking of the voltage phase at the point of common coupling using a phase-locked loop (PLL). In this study, we propose a method to evaluate the effect of power system dynamics on the PLL performance. Simulation results demonstrate that the PLL performance is considerably affected by the power system dynamics, which is not observable under conventional test conditions considering a PLL connected to a three-phase voltage source. Therefore, we proposed an improved evaluation method considering the same source but integrating the system dynamics during evaluation. We expect that the proposed method will assist in the design of PLLs to improve the phase tracking of the voltage at the point of common coupling. [ABSTRACT FROM AUTHOR]

POWER plants are subject to introduce disturbances in the power grid, resulting from interactions with the dynamical behavior of the energy source subsystem. In the case of hydropower plants when used to compensate for variations of power generation and consumption, instabilities or undesirable disturbances may arise. They may be caused by phenomena such as part load vortex rope pulsations in the draft tube of Francis turbines. This may affect the dynamical behavior of the power plant and lead to troublesome interactions with the grid. This paper presents a case study of an existing hydropower plant that illustrates the effects of pressure pulsations due to vortex rope precession on the draft tube of Francis turbines. It also showcases possible solutions to the mitigation of the effects of this disturbing hydraulic phenomenon over the operation of the generators and electrical system. The investigated system is a 1-GW hydropower plant (4 × 250 MW units). The assessment of the power swings is performed through modal analysis combined with frequency-domain and time-domain simulations, which are then compared with onsite measurements. [ABSTRACT FROM AUTHOR]

The need for accelerating power grid simulation through high performance computing (HPC) has long been recognized, and prior efforts have been devoted to developing one-off parallel computing applications for particular power grid functions. Non-transferable software codes and duplicated implementations in these prior efforts are a major barrier to more widespread HPC adoption in power grid applications. Modern HPC hardware and architecture require significant computing expertise for application development. The GridPACK™ software framework described in this paper provides an HPC-compatible software structure to access modern parallel solvers and HPC-ready modules for common components in power grid simulation applications. GridPACK hides the HPC details and enables power system developers to focus on applications instead of computational details. Several example applications of GridPACK are presented to demonstrate the capabilities of GridPACK and the performance of HPC simulations with large power grid networks. Examples discussed include: a dynamic simulation application capable of running a 17,156-bus Western Electricity Coordinating Council (WECC) system in a computational speed faster than real time (e.g., under 30 s for a 30-s simulation), a static contingency analysis application using a task manager, and a dynamic contingency analysis application utilizing two levels of parallelism. These example applications illustrate GridPACK's capabilities to support different types of simulations within a unified framework and to support reuse of transferable software codes across power grid applications. The computational results indicate strong performance improvements for power grid simulations with GridPACK. [ABSTRACT FROM AUTHOR]

This paper presents a new approach in adaptive out-of-step (OOS) protection settings in power systems in real time. The proposed method uses extended equal area criterion (EEAC) to determine the critical clearing time and critical clearing angle of the system, which are vital information for the OOS protection setting calculation. The dynamic model parameters and the coherency groups of the system for EEAC analysis are determined in real time to ensure that the newly calculated settings suit with the prevalent system operating condition. The effectiveness of the method is demonstrated in simulated data from a 16-machine 68-bus system model. [ABSTRACT FROM PUBLISHER]

A method of modifying existing grid-connected inverter models for use in droop-controlled microgrids is presented. The modification involves combination with a model of a grid-forming inverter to accurately represent the coupling between complex power, bus voltage, and frequency. The combination is performed after the individual models are linearized, adding little in terms of computational complexity. The method is applicable to any three-phase inverter operating in a grid-supporting capacity and is scalable for any number of parallel inverters at the same point of connection. To examine the modification process and its effect on model performance, a generic grid-tied inverter model is derived and used as a test case. The newly derived model is modified according to the proposed method. The validity of this process is assessed through comparisons of model predictions—both from before and after modification—to results of hardware experiments. A simple design example is given to demonstrate the application of this process in the design of inverters in distributed-generation-based microgrids. [ABSTRACT FROM PUBLISHER]

In this paper, a new multi-agent control system (MACS) is proposed for smart distribution networks. It can: 1) eliminate the feeders' congestion, 2) globally correct voltage violations, and 3) coordinate the operation of reactive power control devices. In performing its functions, the MACS must prevent overstress on the substation voltage regulator tap changer under all operating conditions, and avoid selective active power curtailment from DG units. This can help to improve reliability, economic revenue, and power quality. A fuzzy rule-based system is employed for decision-making support in MACS. The proposed MACS can achieve the self-healing requirement of smart distribution network. It eliminates feeders' congestion by properly reconfiguring the distribution network. Meanwhile, it amends most of voltage violation problems by coordinated operation of voltage control devices in the distribution system. The MACS overcomes the severe voltage violation problems via distribution network reconfiguration. It is applied to the IEEE 33-bus test feeder. A full dynamic model is constructed using a parallel MATLAB-JADE simulation arrangement. Comparative performance evaluations of the MACS and other schemes are presented under various conditions. [ABSTRACT FROM AUTHOR]