Search

We present a high compact structure laser diode (LD) side-pumped all-solid-state Q-switched master oscillator power amplifier (MOPA) laser system with high beam quality. Bidirectional voltage-supplied Q-switched and MOPA technologies were introduced in the design. An in-center wavelength of 1064 nm with pulse width adjustability from 5 to 18 ns was obtained at the repetition rate of 500 Hz. Through multistage Nd:YAG amplifiers at the pulse width of 6 ns, the oscillator was scaled up to 145 W and the corresponding peak power reached 48.3 MW with single pulse energy fluctuation less than 0.45% in 1 h operation. [ABSTRACT FROM AUTHOR]

In this article, we report an all-fiber master oscillator power amplifier (MOPA) system, which can provide high repetition rate and nanosecond pulse with diffraction-limit. The system was constructed using a (2 + 1) × 1 multimode combiner. The Q-Switched, LD pumped Nd:YVO4 solid-state laser was used as master oscillator. The 976-nm fiber-coupled module is used as pump source. A 10-m long China-made Yb3+-doped D-shape double-clad large-mode-area fiber was used as amplifier fiber. The MOPA produced as much as 20-W average power with nanosecond pulse and near diffraction limited. The pulse duration is maintained at about 15 ns during 50–175 kHz. The system employs a simple and compact architecture and is therefore suitable for the use in practical applications such as scientific and military airborne LIDAR and imaging. Based on this system, the amplification performances of the all-fiber amplifier is investigated. © 2008 Wiley Periodicals, Inc. Microwave Opt Technol Lett 50: 2546–2549, 2008; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.23770 [ABSTRACT FROM AUTHOR]

Abstract: A theoretical study for ultraviolet upconversion fiber master oscillator power amplifier (MOPA) based on the transition from the 4f5d state to the 3H4 ground state in Pr3+:ZBLAN fiber is performed by using steady population rate equations and propagation equations. The variation of the output power with the fiber length of master oscillator and MOPA and the launched pump powers, the dependence of the slope efficiency on the fiber length of master oscillator and MOPA, and the optimum fiber length of MOPA as a function of the launched pump powers, are calculated. Both the output power and the slope efficiency of MOPA are 2–3 times those of the simplex oscillator. It is found that the UV upconversion fiber MOPA system can effectively improve the output power and the slope efficiency of laser. [Copyright &y& Elsevier]