Search

Three stator cooling jacket concepts, including a new cooling jacket concept with parallel straight spiral channels, are evaluated for electric machine of mild hybrid electric car. Steady-state cooling jacket thermal flow analysis and transient-state full motor simulations with circumferential, axial, and spiral jacket concepts are carried out to predict their heat transfer performance and temperature distribution. A prototype motor has been made with the new jacket concept. Infrared thermography is performed to detect the transient temperature distribution of the motor stator windings and laminations for validation of the thermal flow analysis. [ABSTRACT FROM AUTHOR]

Through analytical equations followed by a systematic optimization study using high-fidelity finite-element (FE) models, the torque capability of three common synchronous machine technologies—namely, a permanent magnet (PM) synchronous machine (PMSM) with V-shaped rare-earth rotor magnets, a PMSM with deep V-shaped ferrite rotor magnets, and a synchronous reluctance machine (SynRM) with four layers of conforming flux barriers are compared for an application in a 48-V mild hybrid electric car. The optimization of the deep V-shaped ferrite PMSM automatically resulted in a spoke-type PM layout for maximum torque production. Yet, an optimized SynRM with conforming flux barriers was achieved that could produce a higher torque than ferrite PMSM. One machine technology is selected and six variants of it, with two rotor PM layouts each with three alternative pole-slot combinations, are subsequently subjected to a large-scale FE model-based drive-cycle design optimization. Various pole-slot combinations are methodically compared in terms of drive-cycle losses, active material cost, torque ripple, and PM demagnetization level. More than 20 000 designs were analyzed over ten energy-centric torque-speed points to identify an optimal design solution. The results of multiphysics analysis incorporating electromagnetics, computational fluid dynamics, and structural analyses are provided, including a study on three different water jacket concepts. A final design is prototyped and primary experimental results are provided. [ABSTRACT FROM AUTHOR]

The paper presents methodologies to detect and locate short-circuit faults on the stator winding of VSI-fed PM brushless dc motors. Normal performance characteristics of the motor are obtained through a discrete-time lumped-parameter network model. The model is modified to accommodate short- circuit faults in order to simulate faulty operation. Fault signatures are extracted from the waveforms of electromagnetic torque and phase-voltage summation using wavelet transform. Three independent detection techniques are introduced. Experimental measurements agree acceptably with simulation results, and validate the proposed methods. This work sets forth the fundamentals of an automatic fault detector and locator, which can be used in a fault-tolerant drive. [ABSTRACT FROM AUTHOR]