Search

The authors have proposed Flexible, Reliable and Intelligent ENergy Delivery System (FRIENDS) as a future power distribution system. In the FRIENDS, new facilities called quality control centers (QCCs), which consist of power electronics devices, distributed generators (DGs), energy storage systems (ESSs), etc., are installed between distribution substations and customers. By controlling and operating those devices in QCCs adequately, various functions can be realized. Particularly, when a power supply from the transmission network is interrupted, isolated local networks which consist of some QCCs are composed in order to realize uninterruptible power supply. In the isolated local network, the DG and ESS in QCCs are employed as backup generators. This paper proposes a novel distributed and autonomous method for balancing the supply and demand during isolated operation. This paper also investigates the effectiveness of the proposed method through some computational simulations using PSCAD/EMTDC. [ABSTRACT FROM AUTHOR]

This paper presents an adaptive dead-time compensation strategy to obtain fundamental phase voltage for inverter fed vector controlled permanent magnet synchronous motor drives. The amplitude of phase dead-time compensation voltage (DTCV) to compensate disturbance voltage due to undesirable characteristics of inverter, such as dead-time, turn-on/off time of switching devices, and on-voltages of switching devices and diodes is adaptively determined according to a dead-lime compensation lime (DTCT). DTCT is identified on-line with using a δ-axis disturbance voltage in the current reference frame that is synchronized with current vector. The δ-axis disturbance voltage is estimated by a disturbance observer. The accuracy of identified DTCT is experimentally confirmed by calculating the mean absolute percentage error (MAPE) between a calculated active power and a measured one. MAPE for adaptive DTCT is almost within 5% at any operating point. [ABSTRACT FROM AUTHOR]

Abstract: Recently, renewable energy technologies such as wind turbine generators and photovoltaic systems have been introduced as distributed generation. The connection of large number of distributed generators causes voltage deviation beyond the statutory range in a distribution system. In this paper, a methodology for voltage control in proposed by using the tap changing transformers and the inverters interfaced with the distributed generators. In the proposed method, information of the voltage and power is collected via a communication network. Based on these information, the optimal reference values are calculated at the control center, and sent to the transformers and the inverters. The proposed method accomplishes a coordinated operation among the control equipments and reduces the voltage deviation. Effectiveness of the proposed method is verified by the numerical simulation results. [Copyright &y& Elsevier]